Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (sysfs-interface) Update tempX_type attribute to be more generic
  hwmon: (adm1031) Fix coding style issues
  hwmon: (it87) Add IT8728F support
  hwmon: (coretemp) Add missing section annotations
  hwmon: (lm90) Add range check to set_update_interval
  hwmon: (lm63) Support extended lookup table of LM96163
  hwmon: (lm63) Expose automatic fan speed control lookup table
  hwmon: (lm63) Fix incorrect comment about I2C address
  hwmon: (lm63) LM64 has a dedicated pin for tachometer
  hwmon: (lm63) Add sensor type attribute for external sensor on LM96163
  hwmon: (lm63) Add support for update_interval sysfs attribute
  hwmon: (lm63) Add support for writing the external critical temperature
  hwmon: (lm63) Add support for unsigned upper temperature limits
  hwmon: (lm63) Add support for LM96163
  hwmon: (lm63) Add support for external temperature offset register
  hwmon: (lm63) Fix checkpatch errors
  hwmon: (max1111) Change sysfs interface to in[0-3]_input in millivolts

Documentation/hwmon/it87

@@ -26,6 +26,10 @@ Supported chips:
     Prefix: 'it8721'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8728F
+    Prefix: 'it8728'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * SiS950   [clone of IT8705F]
     Prefix: 'it87'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -71,7 +75,7 @@ Description
 -----------
 
 This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8721F, IT8726F, IT8758E and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -105,6 +109,9 @@ The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
 to userspace applications.
 
+The IT8728F is considered compatible with the IT8721F, until a datasheet
+becomes available (hopefully.)
+
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
 
@@ -121,8 +128,8 @@ alarm is triggered if the voltage has crossed a programmable minimum or
 maximum limit. Note that minimum in this case always means 'closest to
 zero'; this is important for negative voltage measurements. All voltage
 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
-0.016 volt (except IT8721F/IT8758E: 0.012 volt.) The battery voltage in8 does
-not have limit registers.
+0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery
+voltage in8 does not have limit registers.
 
 On the IT8721F/IT8758E, some voltage inputs are internal and scaled inside
 the chip (in7, in8 and optionally in3). The driver handles this transparently

Documentation/hwmon/lm63

@@ -12,6 +12,11 @@ Supported chips:
     Addresses scanned: I2C 0x18 and 0x4e
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM64.html
+  * National Semiconductor LM96163
+    Prefix: 'lm96163'
+    Addresses scanned: I2C 0x4c
+    Datasheet: Publicly available at the National Semiconductor website
+               http://www.national.com/pf/LM/LM96163.html
 
 Author: Jean Delvare <khali@linux-fr.org>
 
@@ -49,16 +54,24 @@ value for measuring the speed of the fan. It can measure fan speeds down to
 Note that the pin used for fan monitoring is shared with an alert out
 function. Depending on how the board designer wanted to use the chip, fan
 speed monitoring will or will not be possible. The proper chip configuration
-is left to the BIOS, and the driver will blindly trust it.
+is left to the BIOS, and the driver will blindly trust it. Only the original
+LM63 suffers from this limitation, the LM64 and LM96163 have separate pins
+for fan monitoring and alert out. On the LM64, monitoring is always enabled;
+on the LM96163 it can be disabled.
 
 A PWM output can be used to control the speed of the fan. The LM63 has two
 PWM modes: manual and automatic. Automatic mode is not fully implemented yet
 (you cannot define your custom PWM/temperature curve), and mode change isn't
 supported either.
 
-The lm63 driver will not update its values more frequently than every
-second; reading them more often will do no harm, but will return 'old'
-values.
+The lm63 driver will not update its values more frequently than configured with
+the update_interval sysfs attribute; reading them more often will do no harm,
+but will return 'old' values. Values in the automatic fan control lookup table
+(attributes pwm1_auto_*) have their own independent lifetime of 5 seconds.
 
 The LM64 is effectively an LM63 with GPIO lines. The driver does not
 support these GPIO lines at present.
+
+The LM96163 is an enhanced version of LM63 with improved temperature accuracy
+and better PWM resolution. For LM96163, the external temperature sensor type is
+configurable as CPU embedded diode(1) or 3904 transistor(2).

Documentation/hwmon/sysfs-interface

@@ -304,7 +304,7 @@ value (fastest fan speed) wins.
 temp[1-*]_type	Sensor type selection.
 		Integers 1 to 6
 		RW
-		1: PII/Celeron Diode
+		1: CPU embedded diode
 		2: 3904 transistor
 		3: thermal diode
 		4: thermistor

drivers/hwmon/Kconfig

@@ -474,8 +474,8 @@ config SENSORS_IT87
 	select HWMON_VID
 	help
 	  If you say yes here you get support for ITE IT8705F, IT8712F,
-	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
-	  chips, and the SiS960 clone.
+	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F and IT8758E
+	  sensor chips, and the SiS960 clone.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called it87.
@@ -515,11 +515,11 @@ config SENSORS_LINEAGE
 	  will be called lineage-pem.
 
 config SENSORS_LM63
-	tristate "National Semiconductor LM63 and LM64"
+	tristate "National Semiconductor LM63 and compatibles"
 	depends on I2C
 	help
 	  If you say yes here you get support for the National
-	  Semiconductor LM63 and LM64 remote diode digital temperature
+	  Semiconductor LM63, LM64, and LM96163 remote diode digital temperature
 	  sensors with integrated fan control.  Such chips are found
 	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
 	  others.