Skip to content

Commit

Permalink
arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes
Browse files Browse the repository at this point in the history 
This patch adds remoteprocs, wifi and usb and usb phy nodes
for this SoC

Co-developed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230530162454.51708-12-vkoul@kernel.org
  • Loading branch information
Vinod Koul authored and Bjorn Andersson committed May 30, 2023
1 parent d20b6c8 commit b080f53
Showing 1 changed file with 355 additions and 0 deletions.
355 changes: 355 additions & 0 deletions arch/arm64/boot/dts/qcom/sc8180x.dtsi
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2227,6 +2227,198 @@
wakeup-parent = <&pdc>;
};

remoteproc_mpss: remoteproc@4080000 {
compatible = "qcom,sc8180x-mpss-pas";
reg = <0x0 0x04080000 0x0 0x4040>;

interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
<&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover",
"stop-ack", "shutdown-ack";

clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

power-domains = <&rpmhpd SC8180X_CX>,
<&rpmhpd SC8180X_MSS>;
power-domain-names = "cx", "mss";

qcom,qmp = <&aoss_qmp>;

qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";

glink-edge {
interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
label = "modem";
qcom,remote-pid = <1>;
mboxes = <&apss_shared 12>;
};
};

remoteproc_cdsp: remoteproc@8300000 {
compatible = "qcom,sc8180x-cdsp-pas";
reg = <0x0 0x08300000 0x0 0x4040>;

interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";

clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

power-domains = <&rpmhpd SC8180X_CX>;
power-domain-names = "cx";

qcom,qmp = <&aoss_qmp>;

qcom,smem-states = <&cdsp_smp2p_out 0>;
qcom,smem-state-names = "stop";

status = "disabled";

glink-edge {
interrupts = <GIC_SPI 574 IRQ_TYPE_EDGE_RISING>;
label = "cdsp";
qcom,remote-pid = <5>;
mboxes = <&apss_shared 4>;
};
};

usb_prim_hsphy: phy@88e2000 {
compatible = "qcom,sc8180x-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
reg = <0 0x088e2000 0 0x400>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;

#phy-cells = <0>;

status = "disabled";
};

usb_sec_hsphy: phy@88e3000 {
compatible = "qcom,sc8180x-usb-hs-phy",
"qcom,usb-snps-hs-7nm-phy";
reg = <0 0x088e3000 0 0x400>;
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "ref";
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;

#phy-cells = <0>;

status = "disabled";
};

usb_prim_qmpphy: phy@88e9000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
reg = <0 0x088e9000 0 0x18c>,
<0 0x088e8000 0 0x38>,
<0 0x088ea000 0 0x40>;
reg-names = "reg-base", "dp_com";
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux",
"ref_clk_src",
"ref",
"com_aux";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_SP0_BCR>,
<&gcc GCC_USB3_PHY_PRIM_SP0_BCR>;
reset-names = "phy", "common";

#clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;

status = "disabled";

usb_prim_ssphy: usb3-phy@88e9200 {
reg = <0 0x088e9200 0 0x200>,
<0 0x088e9400 0 0x200>,
<0 0x088e9c00 0 0x218>,
<0 0x088e9600 0 0x200>,
<0 0x088e9800 0 0x200>,
<0 0x088e9a00 0 0x100>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_prim_phy_pipe_clk_src";
};

usb_prim_dpphy: dp-phy@88ea200 {
reg = <0 0x088ea200 0 0x200>,
<0 0x088ea400 0 0x200>,
<0 0x088eaa00 0 0x200>,
<0 0x088ea600 0 0x200>,
<0 0x088ea800 0 0x200>;
#clock-cells = <1>;
#phy-cells = <0>;
};
};

usb_sec_qmpphy: phy@88ee000 {
compatible = "qcom,sc8180x-qmp-usb3-dp-phy";
reg = <0 0x088ee000 0 0x18c>,
<0 0x088ed000 0 0x10>,
<0 0x088ef000 0 0x40>;
reg-names = "reg-base", "dp_com";
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
clock-names = "aux",
"ref_clk_src",
"ref",
"com_aux";
resets = <&gcc GCC_USB3_DP_PHY_SEC_BCR>,
<&gcc GCC_USB3_PHY_SEC_BCR>;
reset-names = "phy", "common";

#clock-cells = <1>;
#address-cells = <2>;
#size-cells = <2>;
ranges;

status = "disabled";

usb_sec_ssphy: usb3-phy@88e9200 {
reg = <0 0x088ee200 0 0x200>,
<0 0x088ee400 0 0x200>,
<0 0x088eec00 0 0x218>,
<0 0x088ee600 0 0x200>,
<0 0x088ee800 0 0x200>,
<0 0x088eea00 0 0x100>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb3_sec_phy_pipe_clk_src";
};

usb_sec_dpphy: dp-phy@88ef200 {
reg = <0 0x088ef200 0 0x200>,
<0 0x088ef400 0 0x200>,
<0 0x088efa00 0 0x200>,
<0 0x088ef600 0 0x200>,
<0 0x088ef800 0 0x200>;
#clock-cells = <1>;
#phy-cells = <0>;
clock-output-names = "qmp_dptx1_phy_pll_link_clk",
"qmp_dptx1_phy_pll_vco_div_clk";
};
};

system-cache-controller@9200000 {
compatible = "qcom,sc8180x-llcc";
reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>;
Expand All @@ -2241,6 +2433,112 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};

usb_prim: usb@a6f8800 {
compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
reg = <0 0x0a6f8800 0 0x400>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq",
"ss_phy_irq",
"dm_hs_phy_irq",
"dp_hs_phy_irq";

clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"mock_utmi",
"sleep",
"xo";
resets = <&gcc GCC_USB30_PRIM_BCR>;
power-domains = <&gcc USB30_PRIM_GDSC>;

interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
interconnect-names = "usb-ddr", "apps-usb";

assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;

#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;

status = "disabled";

usb_prim_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x140 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_prim_hsphy>, <&usb_prim_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};

usb_sec: usb@a8f8800 {
compatible = "qcom,sc8180x-dwc3", "qcom,dwc3";
reg = <0 0x0a8f8800 0 0x400>;

clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_SLEEP_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"mock_utmi",
"sleep",
"xo";
resets = <&gcc GCC_USB30_SEC_BCR>;
power-domains = <&gcc USB30_SEC_GDSC>;
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";

assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;

interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
interconnect-names = "usb-ddr", "apps-usb";

#address-cells = <2>;
#size-cells = <2>;
ranges;
dma-ranges;

status = "disabled";

usb_sec_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x160 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
phys = <&usb_sec_hsphy>, <&usb_sec_ssphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};

pdc: interrupt-controller@b220000 {
compatible = "qcom,sc8180x-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
Expand Down Expand Up @@ -2416,6 +2714,39 @@

};

remoteproc_adsp: remoteproc@17300000 {
compatible = "qcom,sc8180x-adsp-pas";
reg = <0x0 0x17300000 0x0 0x4040>;

interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready",
"handover", "stop-ack";

clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";

power-domains = <&rpmhpd SC8180X_CX>;
power-domain-names = "cx";

qcom,qmp = <&aoss_qmp>;

qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";

status = "disabled";

remoteproc_adsp_glink: glink-edge {
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
qcom,remote-pid = <2>;
mboxes = <&apss_shared 8>;
};
};

intc: interrupt-controller@17a00000 {
compatible = "arm,gic-v3";
interrupt-controller;
Expand Down Expand Up @@ -2615,6 +2946,30 @@
#clock-cells = <1>;
};

wifi: wifi@18800000 {
compatible = "qcom,wcn3990-wifi";
reg = <0 0x18800000 0 0x800000>;
reg-names = "membase";
clock-names = "cxo_ref_clk_pin";
clocks = <&rpmhcc RPMH_RF_CLK2>;
interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x0640 0x1>;
qcom,msa-fixed-perm;
status = "disabled";
};
};

thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
Expand Down

0 comments on commit b080f53

Please sign in to comment.