ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin inst…

…ances

The sh73a0 INTC can't mask interrupts properly most likely due to a
hardware bug. Set the .control_parent flag to delegate masking to the
parent interrupt controller, like was already done for irqpin1.

Without this, accessing the three-axis digital accelerometer ADXL345
on kzm9g through /dev/input/event1 causes an interrupt storm, which
requires a power-cycle to recover from.

This was inspired by a patch for arch/arm/boot/dts/sh73a0.dtsi from
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 341eb54 ("ARM: shmobile: INTC External IRQ pin driver on sh73a0")
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -579,6 +579,7 @@ static struct platform_device ipmmu_device = {
 
 static struct renesas_intc_irqpin_config irqpin0_platform_data = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
+	.control_parent = true,
 };
 
 static struct resource irqpin0_resources[] = {
@@ -640,6 +641,7 @@ static struct platform_device irqpin1_device = {
 
 static struct renesas_intc_irqpin_config irqpin2_platform_data = {
 	.irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
+	.control_parent = true,
 };
 
 static struct resource irqpin2_resources[] = {
@@ -670,6 +672,7 @@ static struct platform_device irqpin2_device = {
 
 static struct renesas_intc_irqpin_config irqpin3_platform_data = {
 	.irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
+	.control_parent = true,
 };
 
 static struct resource irqpin3_resources[] = {