Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/linville/wireless-next into wireless

John W. Linville says:

====================
This is a big pull request for new features intended for the 3.10
stream...

Regarding mac80211, Johannes says:

"First, I merged mac80211/master to avoid some conflicts. This brings in
a bunch of fixes you're already familiar with. For real -next material,
I have a whole bunch of minstrel work, minstrel_ht from Felix and legacy
minstrel from Thomas (Huehn). The other Thomas (Pedersen) did a number
of changes in mesh to allow userspace peering management even when the
mesh isn't secured. Stanislaw changes suspend/resume to always
disconnect the networks. This is typically already done by
network-manager so won't make a huge difference for most users, but
fixes a number problems, particularly with USB drivers that can easily
disconnect while suspended. Ilan has a small change to allow mac80211
drivers to differentiate remain-on-channel reasons, and Jouni extends
nl80211 to allow fast roaming with full-MAC devices. I have a fairly
large number of patches as well, many of them fairly simple cleanups,
but also allowing split wiphy dumps and adding back the full wiphy
information in nl80211, station entry change checking and more VHT work
including VHT capability overrides (mostly for testing purposes)."

And for iwlwifi, Johannes says:

"Here, I also merged iwlwifi-fixes to avoid conflicts, and otherwise have
various cleanups and improvements on the MVM driver, along with a few
throughout the driver. Other than Bluetooth Coexistence from Emmanuel
there's no over-arching theme, so listing them would pretty much
reproduce the shortlog."

Regarding NFC, Samuel says:

"The 2 features we have with this one are:

- An LLCP Service Name Lookup (SNL) netlink interface for querying LLCP
  service availability from user space.
  Along the way, Thierry also improved the existing SNL interface for
  aggregating SNL responses.

- An initial LLCP socket options implementation, for setting the Receive
  Window (RW) and the Maximum Information Unit Extension (MIUX) per socket.
  This is need for the LLCP validation tests.

We also have a microread MEI build failure here: I am not sending this one to
3.9 because the MEI bus code is not there yet, so it won't break for anyone
else than me."

And for ath6kl, Kalle says:

"I added tracing support to ath6kl, along with a new Kconfig option. Now
there's also a workaround to reset USB devices when the firmware upload
fails, this happened when host was warm rebooted. There are also quite a
few small fixes or cleanup."

On top of all that, there is the usual bundle of driver updates
with new features, new hardware support and the like mixed-in.
The ath9k, b43, brcmfmac, mwifiex, rt2800, and wil6210 drivers
are all well-represented, and a few other drivers are hit as well.
I also pulled-in the wireless fixes tree in order to resolve some
pending merge conflicts.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -8500,7 +8500,7 @@ F:	drivers/usb/gadget/*uvc*.c
 F:	drivers/usb/gadget/webcam.c
 
 USB WIRELESS RNDIS DRIVER (rndis_wlan)
-M:	Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
+M:	Jussi Kivilinna <jussi.kivilinna@iki.fi>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/rndis_wlan.c

drivers/bcma/core.c

@@ -104,7 +104,13 @@ void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
 		if (i)
 			bcma_err(core->bus, "PLL enable timeout\n");
 	} else {
-		bcma_warn(core->bus, "Disabling PLL not supported yet!\n");
+		/*
+		 * Mask the PLL but don't wait for it to be disabled. PLL may be
+		 * shared between cores and will be still up if there is another
+		 * core using it.
+		 */
+		bcma_mask32(core, BCMA_CLKCTLST, ~req);
+		bcma_read32(core, BCMA_CLKCTLST);
 	}
 }
 EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);

drivers/bcma/main.c

@@ -120,6 +120,11 @@ static int bcma_register_cores(struct bcma_bus *bus)
 			continue;
 		}
 
+		/* Only first GMAC core on BCM4706 is connected and working */
+		if (core->id.id == BCMA_CORE_4706_MAC_GBIT &&
+		    core->core_unit > 0)
+			continue;
+
 		core->dev.release = bcma_release_core_dev;
 		core->dev.bus = &bcma_bus_type;
 		dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id);

drivers/net/wireless/ath/ath5k/ath5k.h

@@ -1523,7 +1523,8 @@ int ath5k_hw_dma_stop(struct ath5k_hw *ah);
 /* EEPROM access functions */
 int ath5k_eeprom_init(struct ath5k_hw *ah);
 void ath5k_eeprom_detach(struct ath5k_hw *ah);
-
+int ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel);
 
 /* Protocol Control Unit Functions */
 /* Helpers */

drivers/net/wireless/ath/ath5k/eeprom.c

@@ -1779,7 +1779,8 @@ ath5k_eeprom_detach(struct ath5k_hw *ah)
 }
 
 int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
+ath5k_eeprom_mode_from_channel(struct ath5k_hw *ah,
+		struct ieee80211_channel *channel)
 {
 	switch (channel->hw_value) {
 	case AR5K_MODE_11A:
@@ -1789,6 +1790,7 @@ ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel)
 	case AR5K_MODE_11B:
 		return AR5K_EEPROM_MODE_11B;
 	default:
-		return -1;
+		ATH5K_WARN(ah, "channel is not A/B/G!");
+		return AR5K_EEPROM_MODE_11A;
 	}
 }

drivers/net/wireless/ath/ath5k/eeprom.h

@@ -493,6 +493,3 @@ struct ath5k_eeprom_info {
 	/* Antenna raw switch tables */
 	u32	ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
 };
-
-int
-ath5k_eeprom_mode_from_channel(struct ieee80211_channel *channel);

drivers/net/wireless/ath/ath5k/phy.c

@@ -1612,11 +1612,7 @@ ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
 
 	ah->ah_cal_mask |= AR5K_CALIBRATION_NF;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(ah->ah_current_channel);
-	if (WARN_ON(ee_mode < 0)) {
-		ah->ah_cal_mask &= ~AR5K_CALIBRATION_NF;
-		return;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, ah->ah_current_channel);
 
 	/* completed NF calibration, test threshold */
 	nf = ath5k_hw_read_measured_noise_floor(ah);
@@ -2317,12 +2313,7 @@ ath5k_hw_set_antenna_mode(struct ath5k_hw *ah, u8 ant_mode)
 
 	def_ant = ah->ah_def_ant;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (ee_mode < 0) {
-		ATH5K_ERR(ah,
-			"invalid channel: %d\n", channel->center_freq);
-		return;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	switch (ant_mode) {
 	case AR5K_ANTMODE_DEFAULT:
@@ -3622,12 +3613,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 		return -EINVAL;
 	}
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (ee_mode < 0) {
-		ATH5K_ERR(ah,
-			"invalid channel: %d\n", channel->center_freq);
-		return -EINVAL;
-	}
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	/* Initialize TX power table */
 	switch (ah->ah_radio) {

drivers/net/wireless/ath/ath5k/reset.c

@@ -984,9 +984,7 @@ ath5k_hw_commit_eeprom_settings(struct ath5k_hw *ah,
 	if (ah->ah_version == AR5K_AR5210)
 		return;
 
-	ee_mode = ath5k_eeprom_mode_from_channel(channel);
-	if (WARN_ON(ee_mode < 0))
-		return;
+	ee_mode = ath5k_eeprom_mode_from_channel(ah, channel);
 
 	/* Adjust power delta for channel 14 */
 	if (channel->center_freq == 2484)

drivers/net/wireless/ath/ath6kl/Kconfig

@@ -30,6 +30,15 @@ config ATH6KL_DEBUG
 	---help---
 	  Enables debug support
 
+config ATH6KL_TRACING
+	bool "Atheros ath6kl tracing support"
+	depends on ATH6KL
+	depends on EVENT_TRACING
+	---help---
+	  Select this to ath6kl use tracing infrastructure.
+
+	  If unsure, say Y to make it easier to debug problems.
+
 config ATH6KL_REGDOMAIN
 	bool "Atheros ath6kl regdomain support"
 	depends on ATH6KL

drivers/net/wireless/ath/ath6kl/Makefile

@@ -35,10 +35,15 @@ ath6kl_core-y += txrx.o
 ath6kl_core-y += wmi.o
 ath6kl_core-y += core.o
 ath6kl_core-y += recovery.o
+
 ath6kl_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
+ath6kl_core-$(CONFIG_ATH6KL_TRACING) += trace.o
 
 obj-$(CONFIG_ATH6KL_SDIO) += ath6kl_sdio.o
 ath6kl_sdio-y += sdio.o
 
 obj-$(CONFIG_ATH6KL_USB) += ath6kl_usb.o
 ath6kl_usb-y += usb.o
+
+# for tracing framework to find trace.h
+CFLAGS_trace.o := -I$(src)

drivers/net/wireless/ath/ath6kl/cfg80211.c

@@ -402,7 +402,7 @@ static bool ath6kl_is_valid_iftype(struct ath6kl *ar, enum nl80211_iftype type,
 	if (type == NL80211_IFTYPE_STATION ||
 	    type == NL80211_IFTYPE_AP || type == NL80211_IFTYPE_ADHOC) {
 		for (i = 0; i < ar->vif_max; i++) {
-			if ((ar->avail_idx_map >> i) & BIT(0)) {
+			if ((ar->avail_idx_map) & BIT(i)) {
 				*if_idx = i;
 				return true;
 			}
@@ -412,7 +412,7 @@ static bool ath6kl_is_valid_iftype(struct ath6kl *ar, enum nl80211_iftype type,
 	if (type == NL80211_IFTYPE_P2P_CLIENT ||
 	    type == NL80211_IFTYPE_P2P_GO) {
 		for (i = ar->max_norm_iface; i < ar->vif_max; i++) {
-			if ((ar->avail_idx_map >> i) & BIT(0)) {
+			if ((ar->avail_idx_map) & BIT(i)) {
 				*if_idx = i;
 				return true;
 			}
@@ -1535,7 +1535,9 @@ static int ath6kl_cfg80211_del_iface(struct wiphy *wiphy,
 
 	ath6kl_cfg80211_vif_stop(vif, test_bit(WMI_READY, &ar->flag));
 
+	rtnl_lock();
 	ath6kl_cfg80211_vif_cleanup(vif);
+	rtnl_unlock();
 
 	return 0;
 }
@@ -2990,13 +2992,15 @@ static int ath6kl_change_station(struct wiphy *wiphy, struct net_device *dev,
 {
 	struct ath6kl *ar = ath6kl_priv(dev);
 	struct ath6kl_vif *vif = netdev_priv(dev);
+	int err;
 
 	if (vif->nw_type != AP_NETWORK)
 		return -EOPNOTSUPP;
 
-	/* Use this only for authorizing/unauthorizing a station */
-	if (!(params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)))
-		return -EOPNOTSUPP;
+	err = cfg80211_check_station_change(wiphy, params,
+					    CFG80211_STA_AP_MLME_CLIENT);
+	if (err)
+		return err;
 
 	if (params->sta_flags_set & BIT(NL80211_STA_FLAG_AUTHORIZED))
 		return ath6kl_wmi_ap_set_mlme(ar->wmi, vif->fw_vif_idx,
@@ -3659,7 +3663,6 @@ struct wireless_dev *ath6kl_interface_add(struct ath6kl *ar, const char *name,
 	vif->sme_state = SME_DISCONNECTED;
 	set_bit(WLAN_ENABLED, &vif->flags);
 	ar->wlan_pwr_state = WLAN_POWER_STATE_ON;
-	set_bit(NETDEV_REGISTERED, &vif->flags);
 
 	if (type == NL80211_IFTYPE_ADHOC)
 		ar->ibss_if_active = true;

drivers/net/wireless/ath/ath6kl/core.h

@@ -560,7 +560,6 @@ enum ath6kl_vif_state {
 	WMM_ENABLED,
 	NETQ_STOPPED,
 	DTIM_EXPIRED,
-	NETDEV_REGISTERED,
 	CLEAR_BSSFILTER_ON_BEACON,
 	DTIM_PERIOD_AVAIL,
 	WLAN_ENABLED,
@@ -936,8 +935,6 @@ void aggr_recv_addba_req_evt(struct ath6kl_vif *vif, u8 tid, u16 seq_no,
 			     u8 win_sz);
 void ath6kl_wakeup_event(void *dev);
 
-void ath6kl_reset_device(struct ath6kl *ar, u32 target_type,
-			 bool wait_fot_compltn, bool cold_reset);
 void ath6kl_init_control_info(struct ath6kl_vif *vif);
 struct ath6kl_vif *ath6kl_vif_first(struct ath6kl *ar);
 void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready);

drivers/net/wireless/ath/ath6kl/debug.c

@@ -56,22 +56,76 @@ int ath6kl_printk(const char *level, const char *fmt, ...)
 }
 EXPORT_SYMBOL(ath6kl_printk);
 
+int ath6kl_info(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+	int ret;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+	ret = ath6kl_printk(KERN_INFO, "%pV", &vaf);
+	trace_ath6kl_log_info(&vaf);
+	va_end(args);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath6kl_info);
+
+int ath6kl_err(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+	int ret;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+	ret = ath6kl_printk(KERN_ERR, "%pV", &vaf);
+	trace_ath6kl_log_err(&vaf);
+	va_end(args);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath6kl_err);
+
+int ath6kl_warn(const char *fmt, ...)
+{
+	struct va_format vaf = {
+		.fmt = fmt,
+	};
+	va_list args;
+	int ret;
+
+	va_start(args, fmt);
+	vaf.va = &args;
+	ret = ath6kl_printk(KERN_WARNING, "%pV", &vaf);
+	trace_ath6kl_log_warn(&vaf);
+	va_end(args);
+
+	return ret;
+}
+EXPORT_SYMBOL(ath6kl_warn);
+
 #ifdef CONFIG_ATH6KL_DEBUG
 
 void ath6kl_dbg(enum ATH6K_DEBUG_MASK mask, const char *fmt, ...)
 {
 	struct va_format vaf;
 	va_list args;
 
-	if (!(debug_mask & mask))
-		return;
-
 	va_start(args, fmt);
 
 	vaf.fmt = fmt;
 	vaf.va = &args;
 
-	ath6kl_printk(KERN_DEBUG, "%pV", &vaf);
+	if (debug_mask & mask)
+		ath6kl_printk(KERN_DEBUG, "%pV", &vaf);
+
+	trace_ath6kl_log_dbg(mask, &vaf);
 
 	va_end(args);
 }
@@ -87,6 +141,10 @@ void ath6kl_dbg_dump(enum ATH6K_DEBUG_MASK mask,
 
 		print_hex_dump_bytes(prefix, DUMP_PREFIX_OFFSET, buf, len);
 	}
+
+	/* tracing code doesn't like null strings :/ */
+	trace_ath6kl_log_dbg_dump(msg ? msg : "", prefix ? prefix : "",
+				  buf, len);
 }
 EXPORT_SYMBOL(ath6kl_dbg_dump);
 
@@ -1752,8 +1810,10 @@ int ath6kl_debug_init_fs(struct ath6kl *ar)
 	debugfs_create_file("tgt_stats", S_IRUSR, ar->debugfs_phy, ar,
 			    &fops_tgt_stats);
 
-	debugfs_create_file("credit_dist_stats", S_IRUSR, ar->debugfs_phy, ar,
-			    &fops_credit_dist_stats);
+	if (ar->hif_type == ATH6KL_HIF_TYPE_SDIO)
+		debugfs_create_file("credit_dist_stats", S_IRUSR,
+				    ar->debugfs_phy, ar,
+				    &fops_credit_dist_stats);
 
 	debugfs_create_file("endpoint_stats", S_IRUSR | S_IWUSR,
 			    ar->debugfs_phy, ar, &fops_endpoint_stats);

drivers/net/wireless/ath/ath6kl/debug.h

@@ -19,6 +19,7 @@
 #define DEBUG_H
 
 #include "hif.h"
+#include "trace.h"
 
 enum ATH6K_DEBUG_MASK {
 	ATH6KL_DBG_CREDIT	= BIT(0),
@@ -51,13 +52,9 @@ enum ATH6K_DEBUG_MASK {
 extern unsigned int debug_mask;
 extern __printf(2, 3)
 int ath6kl_printk(const char *level, const char *fmt, ...);
-
-#define ath6kl_info(fmt, ...)				\
-	ath6kl_printk(KERN_INFO, fmt, ##__VA_ARGS__)
-#define ath6kl_err(fmt, ...)					\
-	ath6kl_printk(KERN_ERR, fmt, ##__VA_ARGS__)
-#define ath6kl_warn(fmt, ...)					\
-	ath6kl_printk(KERN_WARNING, fmt, ##__VA_ARGS__)
+extern __printf(1, 2) int ath6kl_info(const char *fmt, ...);
+extern __printf(1, 2) int ath6kl_err(const char *fmt, ...);
+extern __printf(1, 2) int ath6kl_warn(const char *fmt, ...);
 
 enum ath6kl_war {
 	ATH6KL_WAR_INVALID_RATE,

drivers/net/wireless/ath/ath6kl/hif.c

@@ -22,6 +22,7 @@
 #include "target.h"
 #include "hif-ops.h"
 #include "debug.h"
+#include "trace.h"
 
 #define MAILBOX_FOR_BLOCK_SIZE          1
 
@@ -436,6 +437,8 @@ static int proc_pending_irqs(struct ath6kl_device *dev, bool *done)
 
 		ath6kl_dump_registers(dev, &dev->irq_proc_reg,
 				      &dev->irq_en_reg);
+		trace_ath6kl_sdio_irq(&dev->irq_en_reg,
+				      sizeof(dev->irq_en_reg));
 
 		/* Update only those registers that are enabled */
 		host_int_status = dev->irq_proc_reg.host_int_status &