Merge remote-tracking branches 'asoc/topic/rt5514', 'asoc/topic/rt561…

…6', 'asoc/topic/rt5640', 'asoc/topic/rt5660' and 'asoc/topic/rt5663' into asoc-next

Documentation/devicetree/bindings/sound/rt5514.txt

@@ -13,6 +13,9 @@ Optional properties:
 - clocks: The phandle of the master clock to the CODEC
 - clock-names: Should be "mclk"
 
+- realtek,dmic-init-delay-ms
+  Set the DMIC initial delay (ms) to wait it ready.
+
 Pins on the device (for linking into audio routes) for RT5514:
 
   * DMIC1L

Documentation/devicetree/bindings/sound/rt5663.txt

@@ -1,18 +1,18 @@
-RT5663/RT5668 audio CODEC
+RT5663 audio CODEC
 
 This device supports I2C only.
 
 Required properties:
 
-- compatible : One of "realtek,rt5663" or "realtek,rt5668".
+- compatible : "realtek,rt5663".
 
 - reg : The I2C address of the device.
 
 - interrupts : The CODEC's interrupt output.
 
 Optional properties:
 
-Pins on the device (for linking into audio routes) for RT5663/RT5668:
+Pins on the device (for linking into audio routes) for RT5663:
 
   * IN1P
   * IN1N

Documentation/devicetree/bindings/sound/rt5665.txt

@@ -0,0 +1,68 @@
+RT5665/RT5666/RT5668 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO4 pin as dmic1 data pin
+  2: using IN2N pin as dmic2 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using GPIO5 pin as dmic2 data pin
+  2: using IN2P pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5665";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};

include/sound/rt5514.h

@@ -0,0 +1,20 @@
+/*
+ * linux/sound/rt5514.h -- Platform data for RT5514
+ *
+ * Copyright 2016 Realtek Semiconductor Corp.
+ * Author: Oder Chiou <oder_chiou@realtek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_RT5514_H
+#define __LINUX_SND_RT5514_H
+
+struct rt5514_platform_data {
+	unsigned int dmic_init_delay;
+};
+
+#endif
+

include/sound/rt5665.h

@@ -0,0 +1,47 @@
+/*
+ * linux/sound/rt5665.h -- Platform data for RT5665
+ *
+ * Copyright 2016 Realtek Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_SND_RT5665_H
+#define __LINUX_SND_RT5665_H
+
+enum rt5665_dmic1_data_pin {
+	RT5665_DMIC1_NULL,
+	RT5665_DMIC1_DATA_GPIO4,
+	RT5665_DMIC1_DATA_IN2N,
+};
+
+enum rt5665_dmic2_data_pin {
+	RT5665_DMIC2_NULL,
+	RT5665_DMIC2_DATA_GPIO5,
+	RT5665_DMIC2_DATA_IN2P,
+};
+
+enum rt5665_jd_src {
+	RT5665_JD_NULL,
+	RT5665_JD1,
+};
+
+struct rt5665_platform_data {
+	bool in1_diff;
+	bool in2_diff;
+	bool in3_diff;
+	bool in4_diff;
+
+	int ldo1_en; /* GPIO for LDO1_EN */
+
+	enum rt5665_dmic1_data_pin dmic1_data_pin;
+	enum rt5665_dmic2_data_pin dmic2_data_pin;
+	enum rt5665_jd_src jd_src;
+
+	unsigned int sar_hs_type;
+};
+
+#endif
+

sound/soc/codecs/Kconfig

@@ -117,6 +117,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_RT5651 if I2C
 	select SND_SOC_RT5659 if I2C
 	select SND_SOC_RT5660 if I2C
+	select SND_SOC_RT5665 if I2C
 	select SND_SOC_RT5663 if I2C
 	select SND_SOC_RT5670 if I2C
 	select SND_SOC_RT5677 if I2C && SPI_MASTER
@@ -667,6 +668,7 @@ config SND_SOC_RL6231
 	default y if SND_SOC_RT5651=y
 	default y if SND_SOC_RT5659=y
 	default y if SND_SOC_RT5660=y
+	default y if SND_SOC_RT5665=y
 	default y if SND_SOC_RT5663=y
 	default y if SND_SOC_RT5670=y
 	default y if SND_SOC_RT5677=y
@@ -677,6 +679,7 @@ config SND_SOC_RL6231
 	default m if SND_SOC_RT5651=m
 	default m if SND_SOC_RT5659=m
 	default m if SND_SOC_RT5660=m
+	default m if SND_SOC_RT5665=m
 	default m if SND_SOC_RT5663=m
 	default m if SND_SOC_RT5670=m
 	default m if SND_SOC_RT5677=m
@@ -725,6 +728,9 @@ config SND_SOC_RT5659
 config SND_SOC_RT5660
 	tristate
 
+config SND_SOC_RT5665
+	tristate
+
 config SND_SOC_RT5663
 	tristate
 

sound/soc/codecs/Makefile

@@ -118,6 +118,7 @@ snd-soc-rt5645-objs := rt5645.o
 snd-soc-rt5651-objs := rt5651.o
 snd-soc-rt5659-objs := rt5659.o
 snd-soc-rt5660-objs := rt5660.o
+snd-soc-rt5665-objs := rt5665.o
 snd-soc-rt5663-objs := rt5663.o
 snd-soc-rt5670-objs := rt5670.o
 snd-soc-rt5677-objs := rt5677.o
@@ -345,6 +346,7 @@ obj-$(CONFIG_SND_SOC_RT5645)	+= snd-soc-rt5645.o
 obj-$(CONFIG_SND_SOC_RT5651)	+= snd-soc-rt5651.o
 obj-$(CONFIG_SND_SOC_RT5659)	+= snd-soc-rt5659.o
 obj-$(CONFIG_SND_SOC_RT5660)	+= snd-soc-rt5660.o
+obj-$(CONFIG_SND_SOC_RT5665)	+= snd-soc-rt5665.o
 obj-$(CONFIG_SND_SOC_RT5663)	+= snd-soc-rt5663.o
 obj-$(CONFIG_SND_SOC_RT5670)	+= snd-soc-rt5670.o
 obj-$(CONFIG_SND_SOC_RT5677)	+= snd-soc-rt5677.o

sound/soc/codecs/rt5514-spi.c

@@ -20,7 +20,6 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/sched.h>
-#include <linux/kthread.h>
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
 #include <linux/regulator/consumer.h>

sound/soc/codecs/rt5514.c

@@ -452,6 +452,9 @@ static int rt5514_set_dmic_clk(struct snd_soc_dapm_widget *w,
 			RT5514_CLK_DMIC_OUT_SEL_MASK,
 			idx << RT5514_CLK_DMIC_OUT_SEL_SFT);
 
+	if (rt5514->pdata.dmic_init_delay)
+		msleep(rt5514->pdata.dmic_init_delay);
+
 	return idx;
 }
 
@@ -1073,9 +1076,18 @@ static const struct of_device_id rt5514_of_match[] = {
 MODULE_DEVICE_TABLE(of, rt5514_of_match);
 #endif
 
+static int rt5514_parse_dt(struct rt5514_priv *rt5514, struct device *dev)
+{
+	device_property_read_u32(dev, "realtek,dmic-init-delay-ms",
+		&rt5514->pdata.dmic_init_delay);
+
+	return 0;
+}
+
 static int rt5514_i2c_probe(struct i2c_client *i2c,
 		    const struct i2c_device_id *id)
 {
+	struct rt5514_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	struct rt5514_priv *rt5514;
 	int ret;
 	unsigned int val;
@@ -1087,6 +1099,11 @@ static int rt5514_i2c_probe(struct i2c_client *i2c,
 
 	i2c_set_clientdata(i2c, rt5514);
 
+	if (pdata)
+		rt5514->pdata = *pdata;
+	else if (i2c->dev.of_node)
+		rt5514_parse_dt(rt5514, &i2c->dev);
+
 	rt5514->i2c_regmap = devm_regmap_init_i2c(i2c, &rt5514_i2c_regmap);
 	if (IS_ERR(rt5514->i2c_regmap)) {
 		ret = PTR_ERR(rt5514->i2c_regmap);

sound/soc/codecs/rt5514.h

@@ -13,6 +13,7 @@
 #define __RT5514_H__
 
 #include <linux/clk.h>
+#include <sound/rt5514.h>
 
 #define RT5514_DEVICE_ID			0x10ec5514
 
@@ -243,6 +244,7 @@ enum {
 };
 
 struct rt5514_priv {
+	struct rt5514_platform_data pdata;
 	struct snd_soc_codec *codec;
 	struct regmap *i2c_regmap, *regmap;
 	struct clk *mclk;

sound/soc/codecs/rt5616.c

@@ -960,8 +960,7 @@ static int rt5616_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_pcm_hw_params *params,
 			    struct snd_soc_dai *dai)
 {
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_codec *codec = dai->codec;
 	struct rt5616_priv *rt5616 = snd_soc_codec_get_drvdata(codec);
 	unsigned int val_len = 0, val_clk, mask_clk;
 	int pre_div, bclk_ms, frame_size;

sound/soc/codecs/rt5640.c

@@ -423,6 +423,8 @@ static const struct snd_kcontrol_new rt5640_snd_controls[] = {
 	SOC_DOUBLE_TLV("ADC Capture Volume", RT5640_ADC_DIG_VOL,
 			RT5640_L_VOL_SFT, RT5640_R_VOL_SFT,
 			127, 0, adc_vol_tlv),
+	SOC_DOUBLE("Mono ADC Capture Switch", RT5640_DUMMY1,
+		RT5640_M_MONO_ADC_L_SFT, RT5640_M_MONO_ADC_R_SFT, 1, 1),
 	SOC_DOUBLE_TLV("Mono ADC Capture Volume", RT5640_ADC_DATA,
 			RT5640_L_VOL_SFT, RT5640_R_VOL_SFT,
 			127, 0, adc_vol_tlv),
@@ -2407,6 +2409,9 @@ static int rt5640_i2c_probe(struct i2c_client *i2c,
 	if (ret != 0)
 		dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret);
 
+	regmap_update_bits(rt5640->regmap, RT5640_DUMMY1,
+				RT5640_MCLK_DET, RT5640_MCLK_DET);
+
 	if (rt5640->pdata.in1_diff)
 		regmap_update_bits(rt5640->regmap, RT5640_IN1_IN2,
 					RT5640_IN_DF1, RT5640_IN_DF1);

sound/soc/codecs/rt5640.h

@@ -1970,6 +1970,12 @@
 #define RT5640_ZCD_HP_DIS			(0x0 << 15)
 #define RT5640_ZCD_HP_EN			(0x1 << 15)
 
+/* General Control 1 (0xfa) */
+#define RT5640_M_MONO_ADC_L			(0x1 << 13)
+#define RT5640_M_MONO_ADC_L_SFT			13
+#define RT5640_M_MONO_ADC_R			(0x1 << 12)
+#define RT5640_M_MONO_ADC_R_SFT			12
+#define RT5640_MCLK_DET				(0x1 << 11)
 
 /* Codec Private Register definition */
 /* 3D Speaker Control (0x63) */

sound/soc/codecs/rt5660.c

@@ -1311,6 +1311,10 @@ static int rt5660_i2c_probe(struct i2c_client *i2c,
 	if (ret != 0)
 		dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret);
 
+	regmap_update_bits(rt5660->regmap, RT5660_GEN_CTRL1,
+		RT5660_AUTO_DIS_AMP | RT5660_MCLK_DET | RT5660_POW_CLKDET,
+		RT5660_AUTO_DIS_AMP | RT5660_MCLK_DET | RT5660_POW_CLKDET);
+
 	if (rt5660->pdata.dmic1_data_pin) {
 		regmap_update_bits(rt5660->regmap, RT5660_GPIO_CTRL1,
 			RT5660_GP1_PIN_MASK, RT5660_GP1_PIN_DMIC1_SCL);

sound/soc/codecs/rt5660.h

@@ -810,6 +810,9 @@
 /* General Control 1 (0xfa) */
 #define RT5660_PWR_VREF_HP			(0x1 << 11)
 #define RT5660_PWR_VREF_HP_SFT			11
+#define RT5660_AUTO_DIS_AMP			(0x1 << 6)
+#define RT5660_MCLK_DET				(0x1 << 5)
+#define RT5660_POW_CLKDET			(0x1 << 1)
 #define RT5660_DIG_GATE_CTRL			(0x1)
 #define RT5660_DIG_GATE_CTRL_SFT		0