i40e: Fix inconsistent use of PF/VF vs pf/vf

Joe Perches pointed out that we were inconsistent in the use of
PF vs pf or VF vs vf in our driver code.  Since acronyms are usually
capitalized to denote that it is an acronym, changed all references to
be consistent throughout the code.

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e.h

@@ -240,17 +240,17 @@ struct i40e_pf {
 	bool fc_autoneg_status;
 
 	u16 eeprom_version;
-	u16 num_vmdq_vsis;         /* num vmdq vsis this pf has set up */
+	u16 num_vmdq_vsis;         /* num vmdq vsis this PF has set up */
 	u16 num_vmdq_qps;          /* num queue pairs per vmdq pool */
 	u16 num_vmdq_msix;         /* num queue vectors per vmdq pool */
-	u16 num_req_vfs;           /* num vfs requested for this vf */
-	u16 num_vf_qps;            /* num queue pairs per vf */
+	u16 num_req_vfs;           /* num VFs requested for this VF */
+	u16 num_vf_qps;            /* num queue pairs per VF */
 #ifdef I40E_FCOE
-	u16 num_fcoe_qps;          /* num fcoe queues this pf has set up */
+	u16 num_fcoe_qps;          /* num fcoe queues this PF has set up */
 	u16 num_fcoe_msix;         /* num queue vectors per fcoe pool */
 #endif /* I40E_FCOE */
-	u16 num_lan_qps;           /* num lan queues this pf has set up */
-	u16 num_lan_msix;          /* num queue vectors for the base pf vsi */
+	u16 num_lan_qps;           /* num lan queues this PF has set up */
+	u16 num_lan_msix;          /* num queue vectors for the base PF vsi */
 	int queues_left;           /* queues left unclaimed */
 	u16 rss_size;              /* num queues in the RSS array */
 	u16 rss_size_max;          /* HW defined max RSS queues */
@@ -612,7 +612,7 @@ static inline bool i40e_rx_is_programming_status(u64 qw)
 
 /**
  * i40e_get_fd_cnt_all - get the total FD filter space available
- * @pf: pointer to the pf struct
+ * @pf: pointer to the PF struct
  **/
 static inline int i40e_get_fd_cnt_all(struct i40e_pf *pf)
 {

drivers/net/ethernet/intel/i40e/i40e_common.c

@@ -691,7 +691,7 @@ i40e_status i40e_get_port_mac_addr(struct i40e_hw *hw, u8 *mac_addr)
 /**
  * i40e_pre_tx_queue_cfg - pre tx queue configure
  * @hw: pointer to the HW structure
- * @queue: target pf queue index
+ * @queue: target PF queue index
  * @enable: state change request
  *
  * Handles hw requirement to indicate intention to enable
@@ -955,7 +955,7 @@ void i40e_clear_hw(struct i40e_hw *hw)
 	u32 val;
 	u32 eol = 0x7ff;
 
-	/* get number of interrupts, queues, and vfs */
+	/* get number of interrupts, queues, and VFs */
 	val = rd32(hw, I40E_GLPCI_CNF2);
 	num_pf_int = (val & I40E_GLPCI_CNF2_MSI_X_PF_N_MASK) >>
 		     I40E_GLPCI_CNF2_MSI_X_PF_N_SHIFT;
@@ -2081,7 +2081,7 @@ i40e_status i40e_aq_remove_macvlan(struct i40e_hw *hw, u16 seid,
 /**
  * i40e_aq_send_msg_to_vf
  * @hw: pointer to the hardware structure
- * @vfid: vf id to send msg
+ * @vfid: VF id to send msg
  * @v_opcode: opcodes for VF-PF communication
  * @v_retval: return error code
  * @msg: pointer to the msg buffer

drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c

@@ -223,7 +223,7 @@ static int i40e_dcbnl_vsi_del_app(struct i40e_vsi *vsi,
 
 /**
  * i40e_dcbnl_del_app - Delete APP on all VSIs
- * @pf: the corresponding pf
+ * @pf: the corresponding PF
  * @app: APP to delete
  *
  * Delete given APP from all the VSIs for given PF
@@ -268,7 +268,7 @@ static bool i40e_dcbnl_find_app(struct i40e_dcbx_config *cfg,
 
 /**
  * i40e_dcbnl_flush_apps - Delete all removed APPs
- * @pf: the corresponding pf
+ * @pf: the corresponding PF
  * @old_cfg: old DCBX configuration data
  * @new_cfg: new DCBX configuration data
  *

drivers/net/ethernet/intel/i40e/i40e_debugfs.c

@@ -35,7 +35,7 @@ static struct dentry *i40e_dbg_root;
 
 /**
  * i40e_dbg_find_vsi - searches for the vsi with the given seid
- * @pf - the pf structure to search for the vsi
+ * @pf - the PF structure to search for the vsi
  * @seid - seid of the vsi it is searching for
  **/
 static struct i40e_vsi *i40e_dbg_find_vsi(struct i40e_pf *pf, int seid)
@@ -54,7 +54,7 @@ static struct i40e_vsi *i40e_dbg_find_vsi(struct i40e_pf *pf, int seid)
 
 /**
  * i40e_dbg_find_veb - searches for the veb with the given seid
- * @pf - the pf structure to search for the veb
+ * @pf - the PF structure to search for the veb
  * @seid - seid of the veb it is searching for
  **/
 static struct i40e_veb *i40e_dbg_find_veb(struct i40e_pf *pf, int seid)
@@ -112,7 +112,7 @@ static ssize_t i40e_dbg_dump_read(struct file *filp, char __user *buffer,
 
 /**
  * i40e_dbg_prep_dump_buf
- * @pf: the pf we're working with
+ * @pf: the PF we're working with
  * @buflen: the desired buffer length
  *
  * Return positive if success, 0 if failed
@@ -675,7 +675,7 @@ static void i40e_dbg_dump_vsi_seid(struct i40e_pf *pf, int seid)
 		 vsi->info.resp_reserved[8], vsi->info.resp_reserved[9],
 		 vsi->info.resp_reserved[10], vsi->info.resp_reserved[11]);
 	if (vsi->back)
-		dev_info(&pf->pdev->dev, "    pf = %p\n", vsi->back);
+		dev_info(&pf->pdev->dev, "    PF = %p\n", vsi->back);
 	dev_info(&pf->pdev->dev, "    idx = %d\n", vsi->idx);
 	dev_info(&pf->pdev->dev,
 		 "    tc_config: numtc = %d, enabled_tc = 0x%x\n",
@@ -946,7 +946,7 @@ static void i40e_dbg_dump_veb_all(struct i40e_pf *pf)
 
 /**
  * i40e_dbg_cmd_fd_ctrl - Enable/disable FD sideband/ATR
- * @pf: the pf that would be altered
+ * @pf: the PF that would be altered
  * @flag: flag that needs enabling or disabling
  * @enable: Enable/disable FD SD/ATR
  **/
@@ -958,7 +958,7 @@ static void i40e_dbg_cmd_fd_ctrl(struct i40e_pf *pf, u64 flag, bool enable)
 		pf->flags &= ~flag;
 		pf->auto_disable_flags |= flag;
 	}
-	dev_info(&pf->pdev->dev, "requesting a pf reset\n");
+	dev_info(&pf->pdev->dev, "requesting a PF reset\n");
 	i40e_do_reset_safe(pf, (1 << __I40E_PF_RESET_REQUESTED));
 }
 
@@ -2128,8 +2128,8 @@ static const struct file_operations i40e_dbg_netdev_ops_fops = {
 };
 
 /**
- * i40e_dbg_pf_init - setup the debugfs directory for the pf
- * @pf: the pf that is starting up
+ * i40e_dbg_pf_init - setup the debugfs directory for the PF
+ * @pf: the PF that is starting up
  **/
 void i40e_dbg_pf_init(struct i40e_pf *pf)
 {
@@ -2165,8 +2165,8 @@ void i40e_dbg_pf_init(struct i40e_pf *pf)
 }
 
 /**
- * i40e_dbg_pf_exit - clear out the pf's debugfs entries
- * @pf: the pf that is stopping
+ * i40e_dbg_pf_exit - clear out the PF's debugfs entries
+ * @pf: the PF that is stopping
  **/
 void i40e_dbg_pf_exit(struct i40e_pf *pf)
 {

drivers/net/ethernet/intel/i40e/i40e_fcoe.c

@@ -149,7 +149,7 @@ static inline bool i40e_fcoe_xid_is_valid(u16 xid)
 
 /**
  * i40e_fcoe_ddp_unmap - unmap the mapped sglist associated
- * @pf: pointer to pf
+ * @pf: pointer to PF
  * @ddp: sw DDP context
  *
  * Unmap the scatter-gather list associated with the given SW DDP context
@@ -268,7 +268,7 @@ static int i40e_fcoe_ddp_put(struct net_device *netdev, u16 xid)
 
 /**
  * i40e_fcoe_sw_init - sets up the HW for FCoE
- * @pf: pointer to pf
+ * @pf: pointer to PF
  *
  * Returns 0 if FCoE is supported otherwise the error code
  **/
@@ -328,7 +328,7 @@ int i40e_init_pf_fcoe(struct i40e_pf *pf)
 
 /**
  * i40e_get_fcoe_tc_map - Return TC map for FCoE APP
- * @pf: pointer to pf
+ * @pf: pointer to PF
  *
  **/
 u8 i40e_get_fcoe_tc_map(struct i40e_pf *pf)
@@ -1531,7 +1531,7 @@ void i40e_fcoe_config_netdev(struct net_device *netdev, struct i40e_vsi *vsi)
 
 /**
  * i40e_fcoe_vsi_setup - allocate and set up FCoE VSI
- * @pf: the pf that VSI is associated with
+ * @pf: the PF that VSI is associated with
  *
  **/
 void i40e_fcoe_vsi_setup(struct i40e_pf *pf)
@@ -1558,7 +1558,7 @@ void i40e_fcoe_vsi_setup(struct i40e_pf *pf)
 	vsi = i40e_vsi_setup(pf, I40E_VSI_FCOE, seid, 0);
 	if (vsi) {
 		dev_dbg(&pf->pdev->dev,
-			"Successfully created FCoE VSI seid %d id %d uplink_seid %d pf seid %d\n",
+			"Successfully created FCoE VSI seid %d id %d uplink_seid %d PF seid %d\n",
 			vsi->seid, vsi->id, vsi->uplink_seid, seid);
 	} else {
 		dev_info(&pf->pdev->dev, "Failed to create FCoE VSI\n");