Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits)
  pppoe.c: Fix kernel panic caused by __pppoe_xmit
  WAN: Fix a TX IRQ causing BUG() in PC300 and PCI200SYN drivers.
  bnx2x: Advance a version number to 1.60.01-0
  bnx2x: Fixed a compilation warning
  bnx2x: LSO code was broken on BE platforms
  qlge: Fix deadlock when cancelling worker.
  net: fix skb_defer_rx_timestamp()
  cxgb4vf: Ingress Queue Entry Size needs to be 64 bytes
  phy: add the IC+ IP1001 driver
  atm: correct sysfs 'device' link creation and parent relationships
  MAINTAINERS: remove me from tulip
  SCTP: Fix SCTP_SET_PEER_PRIMARY_ADDR to accpet v4mapped address
  enic: Bug Fix: Pass napi reference to the isr that services receive queue
  ipv6: fix nl group when advertising a new link
  connector: add module alias
  net: Document the kernel_recvmsg() function
  r8169: Fix runtime power management
  hso: IP checksuming doesn't work on GE0301 option cards
  xfrm: Fix xfrm_state_migrate leak
  net: Convert netpoll blocking api in bonding driver to be a counter
  ...

MAINTAINERS

@@ -5932,7 +5932,6 @@ F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
 M:	Grant Grundler <grundler@parisc-linux.org>
-M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/

drivers/atm/adummy.c

@@ -154,7 +154,7 @@ static int __init adummy_init(void)
 		err = -ENOMEM;
 		goto out;
 	}
-	atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, NULL);
+	atm_dev = atm_dev_register(DEV_LABEL, NULL, &adummy_ops, -1, NULL);
 	if (!atm_dev) {
 		printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
 		err = -ENODEV;

drivers/atm/ambassador.c

@@ -2244,7 +2244,8 @@ static int __devinit amb_probe(struct pci_dev *pci_dev, const struct pci_device_
 		goto out_reset;
 	}
 
-	dev->atm_dev = atm_dev_register (DEV_LABEL, &amb_ops, -1, NULL);
+	dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1,
+					 NULL);
 	if (!dev->atm_dev) {
 		PRINTD (DBG_ERR, "failed to register Madge ATM adapter");
 		err = -EINVAL;

drivers/atm/atmtcp.c

@@ -366,7 +366,7 @@ static int atmtcp_create(int itf,int persist,struct atm_dev **result)
 	if (!dev_data)
 		return -ENOMEM;
 
-	dev = atm_dev_register(DEV_LABEL,&atmtcp_v_dev_ops,itf,NULL);
+	dev = atm_dev_register(DEV_LABEL,NULL,&atmtcp_v_dev_ops,itf,NULL);
 	if (!dev) {
 		kfree(dev_data);
 		return itf == -1 ? -ENOMEM : -EBUSY;

drivers/atm/eni.c

@@ -2244,7 +2244,7 @@ static int __devinit eni_init_one(struct pci_dev *pci_dev,
 		    &zeroes);
 		if (!cpu_zeroes) goto out1;
 	}
-	dev = atm_dev_register(DEV_LABEL,&ops,-1,NULL);
+	dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
 	if (!dev) goto out2;
 	pci_set_drvdata(pci_dev, dev);
 	eni_dev->pci_dev = pci_dev;

drivers/atm/firestream.c

@@ -1911,7 +1911,7 @@ static int __devinit firestream_init_one (struct pci_dev *pci_dev,
 		    fs_dev, sizeof (struct fs_dev));
 	if (!fs_dev)
 		goto err_out;
-	atm_dev = atm_dev_register("fs", &ops, -1, NULL);
+	atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL);
 	if (!atm_dev)
 		goto err_out_free_fs_dev;
 

drivers/atm/fore200e.c

@@ -2567,14 +2567,14 @@ fore200e_load_and_start_fw(struct fore200e* fore200e)
 
 
 static int __devinit
-fore200e_register(struct fore200e* fore200e)
+fore200e_register(struct fore200e* fore200e, struct device *parent)
 {
     struct atm_dev* atm_dev;
 
     DPRINTK(2, "device %s being registered\n", fore200e->name);
 
-    atm_dev = atm_dev_register(fore200e->bus->proc_name, &fore200e_ops, -1,
-      NULL); 
+    atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops,
+                               -1, NULL);
     if (atm_dev == NULL) {
 	printk(FORE200E "unable to register device %s\n", fore200e->name);
 	return -ENODEV;
@@ -2594,9 +2594,9 @@ fore200e_register(struct fore200e* fore200e)
 
 
 static int __devinit
-fore200e_init(struct fore200e* fore200e)
+fore200e_init(struct fore200e* fore200e, struct device *parent)
 {
-    if (fore200e_register(fore200e) < 0)
+    if (fore200e_register(fore200e, parent) < 0)
 	return -ENODEV;
 
     if (fore200e->bus->configure(fore200e) < 0)
@@ -2662,7 +2662,7 @@ static int __devinit fore200e_sba_probe(struct platform_device *op,
 
 	sprintf(fore200e->name, "%s-%d", bus->model_name, index);
 
-	err = fore200e_init(fore200e);
+	err = fore200e_init(fore200e, &op->dev);
 	if (err < 0) {
 		fore200e_shutdown(fore200e);
 		kfree(fore200e);
@@ -2740,7 +2740,7 @@ fore200e_pca_detect(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent
 
     sprintf(fore200e->name, "%s-%d", bus->model_name, index);
 
-    err = fore200e_init(fore200e);
+    err = fore200e_init(fore200e, &pci_dev->dev);
     if (err < 0) {
 	fore200e_shutdown(fore200e);
 	goto out_free;

drivers/atm/he.c

@@ -366,7 +366,7 @@ he_init_one(struct pci_dev *pci_dev, const struct pci_device_id *pci_ent)
 		goto init_one_failure;
 	}
 
-	atm_dev = atm_dev_register(DEV_LABEL, &he_ops, -1, NULL);
+	atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &he_ops, -1, NULL);
 	if (!atm_dev) {
 		err = -ENODEV;
 		goto init_one_failure;

drivers/atm/horizon.c

@@ -2733,7 +2733,8 @@ static int __devinit hrz_probe(struct pci_dev *pci_dev, const struct pci_device_
 	PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",
 	       iobase, irq, membase);
 
-	dev->atm_dev = atm_dev_register(DEV_LABEL, &hrz_ops, -1, NULL);
+	dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1,
+					NULL);
 	if (!(dev->atm_dev)) {
 		PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
 		err = -EINVAL;

drivers/atm/idt77252.c

@@ -3698,7 +3698,8 @@ idt77252_init_one(struct pci_dev *pcidev, const struct pci_device_id *id)
 		goto err_out_iounmap;
 	}
 
-	dev = atm_dev_register("idt77252", &idt77252_ops, -1, NULL);
+	dev = atm_dev_register("idt77252", &pcidev->dev, &idt77252_ops, -1,
+			       NULL);
 	if (!dev) {
 		printk("%s: can't register atm device\n", card->name);
 		err = -EIO;

drivers/atm/iphase.c

@@ -3172,7 +3172,7 @@ static int __devinit ia_init_one(struct pci_dev *pdev,
 		ret = -ENODEV;
 		goto err_out_free_iadev;
 	}
-	dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+	dev = atm_dev_register(DEV_LABEL, &pdev->dev, &ops, -1, NULL);
 	if (!dev) {
 		ret = -ENOMEM;
 		goto err_out_disable_dev;

drivers/atm/lanai.c

@@ -2591,7 +2591,7 @@ static int __devinit lanai_init_one(struct pci_dev *pci,
 		return -ENOMEM;
 	}
 
-	atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+	atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
 	if (atmdev == NULL) {
 		printk(KERN_ERR DEV_LABEL
 		    ": couldn't register atm device!\n");

drivers/atm/nicstar.c

@@ -771,7 +771,8 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
 	}
 
 	/* Register device */
-	card->atmdev = atm_dev_register("nicstar", &atm_ops, -1, NULL);
+	card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
+					-1, NULL);
 	if (card->atmdev == NULL) {
 		printk("nicstar%d: can't register device.\n", i);
 		error = 17;

drivers/atm/solos-pci.c

@@ -166,7 +166,7 @@ static irqreturn_t solos_irq(int irq, void *dev_id);
 static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
 static int list_vccs(int vci);
 static void release_vccs(struct atm_dev *dev);
-static int atm_init(struct solos_card *);
+static int atm_init(struct solos_card *, struct device *);
 static void atm_remove(struct solos_card *);
 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
 static void solos_bh(unsigned long);
@@ -1210,7 +1210,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (db_firmware_upgrade)
 		flash_upgrade(card, 3);
 
-	err = atm_init(card);
+	err = atm_init(card, &dev->dev);
 	if (err)
 		goto out_free_irq;
 
@@ -1233,7 +1233,7 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	return err;
 }
 
-static int atm_init(struct solos_card *card)
+static int atm_init(struct solos_card *card, struct device *parent)
 {
 	int i;
 
@@ -1244,7 +1244,7 @@ static int atm_init(struct solos_card *card)
 		skb_queue_head_init(&card->tx_queue[i]);
 		skb_queue_head_init(&card->cli_queue[i]);
 
-		card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL);
+		card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
 		if (!card->atmdev[i]) {
 			dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
 			atm_remove(card);

drivers/atm/zatm.c

@@ -1597,7 +1597,7 @@ static int __devinit zatm_init_one(struct pci_dev *pci_dev,
 		goto out;
 	}
 
-	dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+	dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
 	if (!dev)
 		goto out_free;
 

drivers/bluetooth/ath3k.c

@@ -35,6 +35,10 @@
 static struct usb_device_id ath3k_table[] = {
 	/* Atheros AR3011 */
 	{ USB_DEVICE(0x0CF3, 0x3000) },
+
+	/* Atheros AR3011 with sflash firmware*/
+	{ USB_DEVICE(0x0CF3, 0x3002) },
+
 	{ }	/* Terminating entry */
 };
 

drivers/bluetooth/btusb.c

@@ -99,6 +99,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Broadcom BCM2033 without firmware */
 	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
 
+	/* Atheros 3011 with sflash firmware */
+	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -239,7 +242,8 @@ static void btusb_intr_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}
@@ -323,7 +327,8 @@ static void btusb_bulk_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}
@@ -412,7 +417,8 @@ static void btusb_isoc_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}

drivers/connector/connector.c

@@ -36,6 +36,7 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
 MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
+MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_CONNECTOR);
 
 static struct cn_dev cdev;
 

drivers/net/b44.c

@@ -381,11 +381,11 @@ static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
 	__b44_set_flow_ctrl(bp, pause_enab);
 }
 
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
 static void b44_wap54g10_workaround(struct b44 *bp)
 {
-	const char *str;
+	char buf[20];
 	u32 val;
 	int err;
 
@@ -394,10 +394,9 @@ static void b44_wap54g10_workaround(struct b44 *bp)
 	 * see https://dev.openwrt.org/ticket/146
 	 * check and reset bit "isolate"
 	 */
-	str = nvram_get("boardnum");
-	if (!str)
+	if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
 		return;
-	if (simple_strtoul(str, NULL, 0) == 2) {
+	if (simple_strtoul(buf, NULL, 0) == 2) {
 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
 		if (err)
 			goto error;

drivers/net/benet/be_cmds.c

@@ -1235,7 +1235,7 @@ int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
 
 		i = 0;
 		netdev_for_each_mc_addr(ha, netdev)
-			memcpy(req->mac[i].byte, ha->addr, ETH_ALEN);
+			memcpy(req->mac[i++].byte, ha->addr, ETH_ALEN);
 	} else {
 		req->promiscuous = 1;
 	}

drivers/net/bnx2x/bnx2x.h

@@ -20,8 +20,8 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.60.00-4"
-#define DRV_MODULE_RELDATE      "2010/11/01"
+#define DRV_MODULE_VERSION      "1.60.01-0"
+#define DRV_MODULE_RELDATE      "2010/11/12"
 #define BNX2X_BC_VER            0x040200
 
 #define BNX2X_MULTI_QUEUE

drivers/net/bnx2x/bnx2x_cmn.c

@@ -1782,15 +1782,15 @@ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb,
 }
 #endif
 
-static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb,
-				     struct eth_tx_parse_bd_e2 *pbd,
-				     u32 xmit_type)
+static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
+					u32 xmit_type)
 {
-	pbd->parsing_data |= cpu_to_le16(skb_shinfo(skb)->gso_size) <<
-		ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT;
+	*parsing_data |= (skb_shinfo(skb)->gso_size <<
+			      ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
+			      ETH_TX_PARSE_BD_E2_LSO_MSS;
 	if ((xmit_type & XMIT_GSO_V6) &&
 	    (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
-		pbd->parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
+		*parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
 }
 
 /**
@@ -1835,15 +1835,15 @@ static inline void bnx2x_set_pbd_gso(struct sk_buff *skb,
  * @return header len
  */
 static inline  u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
-	struct eth_tx_parse_bd_e2 *pbd,
-	u32 xmit_type)
+	u32 *parsing_data, u32 xmit_type)
 {
-	pbd->parsing_data |= cpu_to_le16(tcp_hdrlen(skb)/4) <<
-		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT;
+	*parsing_data |= ((tcp_hdrlen(skb)/4) <<
+		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+		ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
 
-	pbd->parsing_data |= cpu_to_le16(((unsigned char *)tcp_hdr(skb) -
-					  skb->data) / 2) <<
-		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT;
+	*parsing_data |= ((((u8 *)tcp_hdr(skb) - skb->data) / 2) <<
+		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+		ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
 
 	return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
 }
@@ -1912,6 +1912,7 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
 	struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
 	struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
+	u32 pbd_e2_parsing_data = 0;
 	u16 pkt_prod, bd_prod;
 	int nbd, fp_index;
 	dma_addr_t mapping;
@@ -2033,8 +2034,9 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
 		/* Set PBD in checksum offload case */
 		if (xmit_type & XMIT_CSUM)
-			hlen = bnx2x_set_pbd_csum_e2(bp,
-						     skb, pbd_e2, xmit_type);
+			hlen = bnx2x_set_pbd_csum_e2(bp, skb,
+						     &pbd_e2_parsing_data,
+						     xmit_type);
 	} else {
 		pbd_e1x = &fp->tx_desc_ring[bd_prod].parse_bd_e1x;
 		memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
@@ -2076,10 +2078,18 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			bd_prod = bnx2x_tx_split(bp, fp, tx_buf, &tx_start_bd,
 						 hlen, bd_prod, ++nbd);
 		if (CHIP_IS_E2(bp))
-			bnx2x_set_pbd_gso_e2(skb, pbd_e2, xmit_type);
+			bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
+					     xmit_type);
 		else
 			bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
 	}
+
+	/* Set the PBD's parsing_data field if not zero
+	 * (for the chips newer than 57711).
+	 */
+	if (pbd_e2_parsing_data)
+		pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
+
 	tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
 
 	/* Handle fragmented skb */