Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:

Core:
 * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
   that support Data Tag will provide increased throughput for metadata.
 * Faster detection of card removal on I/O errors.

Drivers:
 * dw_mmc now supports eMMC Power Off Notify, has PCI support, and
   implements pre_req and post_req for asynchronous requests.
 * omap_hsmmc now supports device tree.
 * esdhc now has power management support.
 * sdhci-tegra now supports Tegra30 devices.
 * sdhci-spear now supports hibernation.
 * tmio_mmc now supports using a GPIO for card detection.
 * Intel PCH now supports 8-bit bus transfers.

* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
  mmc: sh_mmcif: simplify bitmask macros
  mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
  mmc: sh_mobile_sdhi: add a callback for board specific init code
  mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
  mmc: sh_mobile_sdhi: do not manage PM clocks manually
  mmc: tmio_mmc: remove unused sdio_irq_enabled flag
  mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
  mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
  mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
  mmc: tmio: calculate the native hotplug condition only once
  mmc: simplify mmc_cd_gpio_request() by removing two parameters
  mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
  mmc: sdhci: check interrupt flags in ISR again
  mmc: sdhci-pci: Add MSI support
  mmc: core: warn when card doesn't support HPI
  mmc: davinci: Poll status for small size transfers
  mmc: davinci: Eliminate spurious interrupts
  mmc: omap_hsmmc: Avoid a regulator voltage change with dt
  mmc: omap_hsmmc: Convert hsmmc driver to use device tree
  mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
  ...

Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt

@@ -0,0 +1,33 @@
+* TI Highspeed MMC host controller for OMAP
+
+The Highspeed MMC Host Controller on TI OMAP family
+provides an interface for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+- compatible:
+ Should be "ti,omap2-hsmmc", for OMAP2 controllers
+ Should be "ti,omap3-hsmmc", for OMAP3 controllers
+ Should be "ti,omap4-hsmmc", for OMAP4 controllers
+- ti,hwmods: Must be "mmc<n>", n is controller instance starting 1
+- reg : should contain hsmmc registers location and length
+
+Optional properties:
+ti,dual-volt: boolean, supports dual voltage cards
+<supply-name>-supply: phandle to the regulator device tree node
+"supply-name" examples are "vmmc", "vmmc_aux" etc
+ti,bus-width: Number of data lines, default assumed is 1 if the property is missing.
+cd-gpios: GPIOs for card detection
+wp-gpios: GPIOs for write protection
+ti,non-removable: non-removable slot (like eMMC)
+ti,needs-special-reset: Requires a special softreset sequence
+
+Example:
+	mmc1: mmc@0x4809c000 {
+		compatible = "ti,omap4-hsmmc";
+		reg = <0x4809c000 0x400>;
+		ti,hwmods = "mmc1";
+		ti,dual-volt;
+		ti,bus-width = <4>;
+		vmmc-supply = <&vmmc>; /* phandle to regulator node */
+		ti,non-removable;
+	};

arch/arm/mach-exynos/mach-nuri.c

@@ -111,7 +111,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_DISABLE | MMC_CAP_ERASE),
+				MMC_CAP_ERASE),
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
@@ -150,8 +150,7 @@ static struct platform_device emmc_fixed_voltage = {
 static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
 	.max_width		= 4,
 	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_DISABLE,
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.ext_cd_gpio		= EXYNOS4_GPX3(3),	/* XEINT_27 */
 	.ext_cd_gpio_invert	= 1,
 	.cd_type		= S3C_SDHCI_CD_GPIO,

arch/arm/mach-exynos/mach-universal_c210.c

@@ -745,8 +745,7 @@ static struct platform_device universal_gpio_keys = {
 static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_DISABLE),
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
@@ -784,8 +783,7 @@ static struct platform_device mmc0_fixed_voltage = {
 static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
 	.max_width		= 4,
 	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_DISABLE,
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.ext_cd_gpio		= EXYNOS4_GPX3(4),      /* XEINT_28 */
 	.ext_cd_gpio_invert	= 1,
 	.cd_type		= S3C_SDHCI_CD_GPIO,
@@ -796,8 +794,7 @@ static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
 static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
 	.max_width		= 4,
 	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_DISABLE,
+				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
 };
 

arch/arm/mach-omap2/hsmmc.c

@@ -316,6 +316,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	mmc->slots[0].pm_caps = c->pm_caps;
 	mmc->slots[0].internal_clock = !c->ext_clock;
 	mmc->dma_mask = 0xffffffff;
+	mmc->max_freq = c->max_freq;
 	if (cpu_is_omap44xx())
 		mmc->reg_offset = OMAP4_MMC_REG_OFFSET;
 	else

arch/arm/mach-omap2/hsmmc.h

@@ -27,6 +27,8 @@ struct omap2_hsmmc_info {
 	char	*name;		/* or NULL for default */
 	struct platform_device *pdev;	/* mmc controller instance */
 	int	ocr_mask;	/* temporary HACK */
+	int	max_freq;	/* maximum clock, if constrained by external
+				 * circuitry, or 0 for default */
 	/* Remux (pad configuration) when powering on/off */
 	void (*remux)(struct device *dev, int slot, int power_on);
 	/* init some special card */

arch/arm/plat-omap/include/plat/mmc.h

@@ -137,8 +137,6 @@ struct omap_mmc_platform_data {
 		int (*set_power)(struct device *dev, int slot,
 				 int power_on, int vdd);
 		int (*get_ro)(struct device *dev, int slot);
-		int (*set_sleep)(struct device *dev, int slot, int sleep,
-				 int vdd, int cardsleep);
 		void (*remux)(struct device *dev, int slot, int power_on);
 		/* Call back before enabling / disabling regulators */
 		void (*before_set_reg)(struct device *dev, int slot,

drivers/mmc/card/block.c

@@ -1079,6 +1079,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	struct mmc_blk_request *brq = &mqrq->brq;
 	struct request *req = mqrq->req;
 	struct mmc_blk_data *md = mq->data;
+	bool do_data_tag;
 
 	/*
 	 * Reliable writes are used to implement Forced Unit Access and
@@ -1154,6 +1155,16 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	if (do_rel_wr)
 		mmc_apply_rel_rw(brq, card, req);
 
+	/*
+	 * Data tag is used only during writing meta data to speed
+	 * up write and any subsequent read of this meta data
+	 */
+	do_data_tag = (card->ext_csd.data_tag_unit_size) &&
+		(req->cmd_flags & REQ_META) &&
+		(rq_data_dir(req) == WRITE) &&
+		((brq->data.blocks * brq->data.blksz) >=
+		 card->ext_csd.data_tag_unit_size);
+
 	/*
 	 * Pre-defined multi-block transfers are preferable to
 	 * open ended-ones (and necessary for reliable writes).
@@ -1172,13 +1183,13 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
 	 * We'll avoid using CMD23-bounded multiblock writes for
 	 * these, while retaining features like reliable writes.
 	 */
-
-	if ((md->flags & MMC_BLK_CMD23) &&
-	    mmc_op_multi(brq->cmd.opcode) &&
-	    (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23))) {
+	if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) &&
+	    (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) ||
+	     do_data_tag)) {
 		brq->sbc.opcode = MMC_SET_BLOCK_COUNT;
 		brq->sbc.arg = brq->data.blocks |
-			(do_rel_wr ? (1 << 31) : 0);
+			(do_rel_wr ? (1 << 31) : 0) |
+			(do_data_tag ? (1 << 29) : 0);
 		brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
 		brq->mrq.sbc = &brq->sbc;
 	}

drivers/mmc/core/cd-gpio.c

@@ -28,13 +28,17 @@ static irqreturn_t mmc_cd_gpio_irqt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio,
-			unsigned int irq, unsigned long flags)
+int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio)
 {
 	size_t len = strlen(dev_name(host->parent)) + 4;
-	struct mmc_cd_gpio *cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL);
+	struct mmc_cd_gpio *cd;
+	int irq = gpio_to_irq(gpio);
 	int ret;
 
+	if (irq < 0)
+		return irq;
+
+	cd = kmalloc(sizeof(*cd) + len, GFP_KERNEL);
 	if (!cd)
 		return -ENOMEM;
 
@@ -45,7 +49,8 @@ int mmc_cd_gpio_request(struct mmc_host *host, unsigned int gpio,
 		goto egpioreq;
 
 	ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt,
-				   flags, cd->label, host);
+				   IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				   cd->label, host);
 	if (ret < 0)
 		goto eirqreq;