Skip to content

Commit

Permalink
net: phy: make use of new MMD accessors
Browse files Browse the repository at this point in the history 
Make use of the new MMD accessors.

v2:
- fix SoB

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
  • Loading branch information
Heiner Kallweit authored and David S. Miller committed Feb 6, 2019
1 parent 1878f0d commit b52c018
Show file tree
Hide file tree
Showing 5 changed files with 38 additions and 94 deletions.
47 changes: 17 additions & 30 deletions drivers/net/phy/dp83867.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -127,17 +127,13 @@ static int dp83867_config_port_mirroring(struct phy_device *phydev)
{
struct dp83867_private *dp83867 =
(struct dp83867_private *)phydev->priv;
u16 val;

val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);

if (dp83867->port_mirroring == DP83867_PORT_MIRROING_EN)
val |= DP83867_CFG4_PORT_MIRROR_EN;
phy_set_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
DP83867_CFG4_PORT_MIRROR_EN);
else
val &= ~DP83867_CFG4_PORT_MIRROR_EN;

phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);

phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
DP83867_CFG4_PORT_MIRROR_EN);
return 0;
}

Expand Down Expand Up @@ -222,11 +218,9 @@ static int dp83867_config_init(struct phy_device *phydev)
}

/* RX_DV/RX_CTRL strapped in mode 1 or mode 2 workaround */
if (dp83867->rxctrl_strap_quirk) {
val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4);
val &= ~BIT(7);
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4, val);
}
if (dp83867->rxctrl_strap_quirk)
phy_clear_bits_mmd(phydev, DP83867_DEVADDR, DP83867_CFG4,
BIT(7));

if (phy_interface_is_rgmii(phydev)) {
val = phy_read(phydev, MII_DP83867_PHYCTRL);
Expand Down Expand Up @@ -275,17 +269,11 @@ static int dp83867_config_init(struct phy_device *phydev)
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_RGMIIDCTL,
delay);

if (dp83867->io_impedance >= 0) {
val = phy_read_mmd(phydev, DP83867_DEVADDR,
DP83867_IO_MUX_CFG);

val &= ~DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;
val |= dp83867->io_impedance &
DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL;

phy_write_mmd(phydev, DP83867_DEVADDR,
DP83867_IO_MUX_CFG, val);
}
if (dp83867->io_impedance >= 0)
phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL,
dp83867->io_impedance &
DP83867_IO_MUX_CFG_IO_IMPEDANCE_CTRL);
}

/* Enable Interrupt output INT_OE in CFG3 register */
Expand All @@ -299,12 +287,11 @@ static int dp83867_config_init(struct phy_device *phydev)
dp83867_config_port_mirroring(phydev);

/* Clock output selection if muxing property is set */
if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK) {
val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG);
val &= ~DP83867_IO_MUX_CFG_CLK_O_SEL_MASK;
val |= (dp83867->clk_output_sel << DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG, val);
}
if (dp83867->clk_output_sel != DP83867_CLK_O_SEL_REF_CLK)
phy_modify_mmd(phydev, DP83867_DEVADDR, DP83867_IO_MUX_CFG,
DP83867_IO_MUX_CFG_CLK_O_SEL_MASK,
dp83867->clk_output_sel <<
DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT);

return 0;
}
Expand Down
15 changes: 4 additions & 11 deletions drivers/net/phy/dp83tc811.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -144,11 +144,8 @@ static int dp83811_set_wol(struct phy_device *phydev,
phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
value);
} else {
value = phy_read_mmd(phydev, DP83811_DEVADDR,
MII_DP83811_WOL_CFG);
value &= ~DP83811_WOL_EN;
phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
value);
phy_clear_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
DP83811_WOL_EN);
}

return 0;
Expand Down Expand Up @@ -328,14 +325,10 @@ static int dp83811_suspend(struct phy_device *phydev)

static int dp83811_resume(struct phy_device *phydev)
{
int value;

genphy_resume(phydev);

value = phy_read_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG);

phy_write_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG, value |
DP83811_WOL_CLR_INDICATION);
phy_set_bits_mmd(phydev, DP83811_DEVADDR, MII_DP83811_WOL_CFG,
DP83811_WOL_CLR_INDICATION);

return 0;
}
Expand Down
38 changes: 10 additions & 28 deletions drivers/net/phy/marvell10g.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -58,24 +58,6 @@ struct mv3310_priv {
char *hwmon_name;
};

static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
u16 mask, u16 bits)
{
int old, val, ret;

old = phy_read_mmd(phydev, devad, reg);
if (old < 0)
return old;

val = (old & ~mask) | (bits & mask);
if (val == old)
return 0;

ret = phy_write_mmd(phydev, devad, reg, val);

return ret < 0 ? ret : 1;
}

#ifdef CONFIG_HWMON
static umode_t mv3310_hwmon_is_visible(const void *data,
enum hwmon_sensor_types type,
Expand Down Expand Up @@ -159,8 +141,8 @@ static int mv3310_hwmon_config(struct phy_device *phydev, bool enable)
return ret;

val = enable ? MV_V2_TEMP_CTRL_SAMPLE : MV_V2_TEMP_CTRL_DISABLE;
ret = mv3310_modify(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
MV_V2_TEMP_CTRL_MASK, val);
ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, MV_V2_TEMP_CTRL,
MV_V2_TEMP_CTRL_MASK, val);

return ret < 0 ? ret : 0;
}
Expand Down Expand Up @@ -363,18 +345,18 @@ static int mv3310_config_aneg(struct phy_device *phydev)
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);

ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_100BASE4 |
ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
linkmode_adv_to_mii_adv_t(phydev->advertising));
ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
ADVERTISE_ALL | ADVERTISE_100BASE4 |
ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
linkmode_adv_to_mii_adv_t(phydev->advertising));
if (ret < 0)
return ret;
if (ret > 0)
changed = true;

reg = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
ret = mv3310_modify(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MV_AN_CTRL1000,
ADVERTISE_1000FULL | ADVERTISE_1000HALF, reg);
if (ret < 0)
return ret;
if (ret > 0)
Expand All @@ -387,8 +369,8 @@ static int mv3310_config_aneg(struct phy_device *phydev)
else
reg = 0;

ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
MDIO_AN_10GBT_CTRL_ADV10G, reg);
ret = phy_modify_mmd(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
MDIO_AN_10GBT_CTRL_ADV10G, reg);
if (ret < 0)
return ret;
if (ret > 0)
Expand Down
21 changes: 4 additions & 17 deletions drivers/net/phy/phy-c45.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -75,15 +75,9 @@ EXPORT_SYMBOL_GPL(genphy_c45_pma_setup_forced);
*/
int genphy_c45_an_disable_aneg(struct phy_device *phydev)
{
int val;

val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
if (val < 0)
return val;

val &= ~(MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);

return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
return phy_clear_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);

Expand All @@ -97,15 +91,8 @@ EXPORT_SYMBOL_GPL(genphy_c45_an_disable_aneg);
*/
int genphy_c45_restart_aneg(struct phy_device *phydev)
{
int val;

val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
if (val < 0)
return val;

val |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;

return phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1, val);
return phy_set_bits_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1,
MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART);
}
EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);

Expand Down
11 changes: 3 additions & 8 deletions drivers/net/phy/phy.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1060,17 +1060,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
if (!phy_check_valid(phydev->speed, phydev->duplex, common))
goto eee_exit_err;

if (clk_stop_enable) {
if (clk_stop_enable)
/* Configure the PHY to stop receiving xMII
* clock while it is signaling LPI.
*/
int val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1);
if (val < 0)
return val;

val |= MDIO_PCS_CTRL1_CLKSTOP_EN;
phy_write_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1, val);
}
phy_set_bits_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL1,
MDIO_PCS_CTRL1_CLKSTOP_EN);

return 0; /* EEE supported */
}
Expand Down

0 comments on commit b52c018

Please sign in to comment.