Merge tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/usb

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes for 4.6-rc4.

  Mostly xhci fixes for reported issues, a UAS bug that has hit a number
  of people, including stable tree users, and a few other minor things.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: hcd: out of bounds access in for_each_companion
  USB: uas: Add a new NO_REPORT_LUNS quirk
  USB: uas: Limit qdepth at the scsi-host level
  doc: usb: Fix typo in gadget_multi documentation
  usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
  xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
  usb: xhci: fix wild pointers in xhci_mem_cleanup
  usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
  usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT
  xhci: resume USB 3 roothub first
  usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
  cdc-acm: fix crash if flushed with nothing buffered

Documentation/kernel-parameters.txt

@@ -4077,6 +4077,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 					sector if the number is odd);
 				i = IGNORE_DEVICE (don't bind to this
 					device);
+				j = NO_REPORT_LUNS (don't use report luns
+					command, uas only);
 				l = NOT_LOCKABLE (don't try to lock and
 					unlock ejectable media);
 				m = MAX_SECTORS_64 (don't transfer more

Documentation/usb/gadget_multi.txt

@@ -43,7 +43,7 @@ For the gadget two work under Windows two conditions have to be met:
 First of all, Windows need to detect the gadget as an USB composite
 gadget which on its own have some conditions[4].  If they are met,
 Windows lets USB Generic Parent Driver[5] handle the device which then
-tries to much drivers for each individual interface (sort of, don't
+tries to match drivers for each individual interface (sort of, don't
 get into too many details).
 
 The good news is: you do not have to worry about most of the

drivers/usb/class/cdc-acm.c

@@ -744,11 +744,15 @@ static void acm_tty_flush_chars(struct tty_struct *tty)
 	int err;
 	unsigned long flags;
 
+	if (!cur) /* nothing to do */
+		return;
+
 	acm->putbuffer = NULL;
 	err = usb_autopm_get_interface_async(acm->control);
 	spin_lock_irqsave(&acm->write_lock, flags);
 	if (err < 0) {
 		cur->use = 0;
+		acm->putbuffer = cur;
 		goto out;
 	}
 

drivers/usb/core/hcd-pci.c

@@ -73,6 +73,15 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd,
 		if (companion->bus != pdev->bus ||
 				PCI_SLOT(companion->devfn) != slot)
 			continue;
+
+		/*
+		 * Companion device should be either UHCI,OHCI or EHCI host
+		 * controller, otherwise skip.
+		 */
+		if (companion->class != CL_UHCI && companion->class != CL_OHCI &&
+				companion->class != CL_EHCI)
+			continue;
+
 		companion_hcd = pci_get_drvdata(companion);
 		if (!companion_hcd || !companion_hcd->self.root_hub)
 			continue;

drivers/usb/host/xhci-mem.c

@@ -1861,6 +1861,12 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	kfree(xhci->rh_bw);
 	kfree(xhci->ext_caps);
 
+	xhci->usb2_ports = NULL;
+	xhci->usb3_ports = NULL;
+	xhci->port_array = NULL;
+	xhci->rh_bw = NULL;
+	xhci->ext_caps = NULL;
+
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
 	xhci->bus_state[0].bus_suspended = 0;

drivers/usb/host/xhci-pci.c

@@ -48,6 +48,7 @@
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f
 #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI		0x0aa8
+#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI		0x1aa8
 
 static const char hcd_name[] = "xhci_hcd";
 
@@ -155,7 +156,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
 		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
-		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI)) {
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
+		 pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI)) {
 		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
@@ -302,6 +304,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
 	struct xhci_hcd *xhci;
 
 	xhci = hcd_to_xhci(pci_get_drvdata(dev));
+	xhci->xhc_state |= XHCI_STATE_REMOVING;
 	if (xhci->shared_hcd) {
 		usb_remove_hcd(xhci->shared_hcd);
 		usb_put_hcd(xhci->shared_hcd);

drivers/usb/host/xhci-plat.c

@@ -39,12 +39,25 @@ static const struct xhci_driver_overrides xhci_plat_overrides __initconst = {
 
 static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
+	struct usb_hcd *hcd = xhci_to_hcd(xhci);
+
 	/*
 	 * As of now platform drivers don't provide MSI support so we ensure
 	 * here that the generic code does not try to make a pci_dev from our
 	 * dev struct in order to setup MSI
 	 */
 	xhci->quirks |= XHCI_PLAT;
+
+	/*
+	 * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
+	 * to 1. However, these SoCs don't support 64-bit address memory
+	 * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
+	 * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
+	 * xhci_gen_setup().
+	 */
+	if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2) ||
+	    xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3))
+		xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 }
 
 /* called during probe() after chip reset completes */

drivers/usb/host/xhci-plat.h

@@ -14,7 +14,7 @@
 #include "xhci.h"	/* for hcd_to_xhci() */
 
 enum xhci_plat_type {
-	XHCI_PLAT_TYPE_MARVELL_ARMADA,
+	XHCI_PLAT_TYPE_MARVELL_ARMADA = 1,
 	XHCI_PLAT_TYPE_RENESAS_RCAR_GEN2,
 	XHCI_PLAT_TYPE_RENESAS_RCAR_GEN3,
 };

drivers/usb/host/xhci-ring.c

@@ -4004,7 +4004,8 @@ static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
 	int reserved_trbs = xhci->cmd_ring_reserved_trbs;
 	int ret;
 
-	if (xhci->xhc_state) {
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_HALTED)) {
 		xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
 		return -ESHUTDOWN;
 	}

drivers/usb/host/xhci.c

@@ -147,7 +147,8 @@ static int xhci_start(struct xhci_hcd *xhci)
 				"waited %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	if (!ret)
-		xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING);
+		/* clear state flags. Including dying, halted or removing */
+		xhci->xhc_state = 0;
 
 	return ret;
 }
@@ -1108,8 +1109,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		/* Resume root hubs only when have pending events. */
 		status = readl(&xhci->op_regs->status);
 		if (status & STS_EINT) {
-			usb_hcd_resume_root_hub(hcd);
 			usb_hcd_resume_root_hub(xhci->shared_hcd);
+			usb_hcd_resume_root_hub(hcd);
 		}
 	}
 
@@ -1124,10 +1125,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* Re-enable port polling. */
 	xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
-	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
-	usb_hcd_poll_rh_status(hcd);
 	set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
 	usb_hcd_poll_rh_status(xhci->shared_hcd);
+	set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+	usb_hcd_poll_rh_status(hcd);
 
 	return retval;
 }
@@ -2773,7 +2774,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	if (ret <= 0)
 		return ret;
 	xhci = hcd_to_xhci(hcd);
-	if (xhci->xhc_state & XHCI_STATE_DYING)
+	if ((xhci->xhc_state & XHCI_STATE_DYING) ||
+		(xhci->xhc_state & XHCI_STATE_REMOVING))
 		return -ENODEV;
 
 	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
@@ -3820,7 +3822,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
 
 	mutex_lock(&xhci->mutex);
 
-	if (xhci->xhc_state)	/* dying or halted */
+	if (xhci->xhc_state)	/* dying, removing or halted */
 		goto out;
 
 	if (!udev->slot_id) {
@@ -4948,6 +4950,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
 		return retval;
 	xhci_dbg(xhci, "Reset complete\n");
 
+	/*
+	 * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0)
+	 * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit
+	 * address memory pointers actually. So, this driver clears the AC64
+	 * bit of xhci->hcc_params to call dma_set_coherent_mask(dev,
+	 * DMA_BIT_MASK(32)) in this xhci_gen_setup().
+	 */
+	if (xhci->quirks & XHCI_NO_64BIT_SUPPORT)
+		xhci->hcc_params &= ~BIT(0);
+
 	/* Set dma_mask and coherent_dma_mask to 64-bits,
 	 * if xHC supports 64-bit addressing */
 	if (HCC_64BIT_ADDR(xhci->hcc_params) &&

drivers/usb/host/xhci.h

@@ -1605,6 +1605,7 @@ struct xhci_hcd {
  */
 #define XHCI_STATE_DYING	(1 << 0)
 #define XHCI_STATE_HALTED	(1 << 1)
+#define XHCI_STATE_REMOVING	(1 << 2)
 	/* Statistics */
 	int			error_bitmask;
 	unsigned int		quirks;
@@ -1641,6 +1642,7 @@ struct xhci_hcd {
 #define XHCI_PME_STUCK_QUIRK	(1 << 20)
 #define XHCI_MTK_HOST		(1 << 21)
 #define XHCI_SSIC_PORT_UNUSED	(1 << 22)
+#define XHCI_NO_64BIT_SUPPORT	(1 << 23)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

drivers/usb/storage/uas.c

@@ -2,7 +2,7 @@
  * USB Attached SCSI
  * Note that this is not the same as the USB Mass Storage driver
  *
- * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2014
+ * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016
  * Copyright Matthew Wilcox for Intel Corp, 2010
  * Copyright Sarah Sharp for Intel Corp, 2010
  *
@@ -781,6 +781,17 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd)
 	return SUCCESS;
 }
 
+static int uas_target_alloc(struct scsi_target *starget)
+{
+	struct uas_dev_info *devinfo = (struct uas_dev_info *)
+			dev_to_shost(starget->dev.parent)->hostdata;
+
+	if (devinfo->flags & US_FL_NO_REPORT_LUNS)
+		starget->no_report_luns = 1;
+
+	return 0;
+}
+
 static int uas_slave_alloc(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo =
@@ -824,14 +835,14 @@ static int uas_slave_configure(struct scsi_device *sdev)
 	if (devinfo->flags & US_FL_BROKEN_FUA)
 		sdev->broken_fua = 1;
 
-	scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
 	return 0;
 }
 
 static struct scsi_host_template uas_host_template = {
 	.module = THIS_MODULE,
 	.name = "uas",
 	.queuecommand = uas_queuecommand,
+	.target_alloc = uas_target_alloc,
 	.slave_alloc = uas_slave_alloc,
 	.slave_configure = uas_slave_configure,
 	.eh_abort_handler = uas_eh_abort_handler,
@@ -956,6 +967,12 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id)
 	if (result)
 		goto set_alt0;
 
+	/*
+	 * 1 tag is reserved for untagged commands +
+	 * 1 tag to avoid off by one errors in some bridge firmwares
+	 */
+	shost->can_queue = devinfo->qdepth - 2;
+
 	usb_set_intfdata(intf, shost);
 	result = scsi_add_host(shost, &intf->dev);
 	if (result)

drivers/usb/storage/unusual_uas.h

@@ -64,6 +64,13 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: David Webb <djw@noc.ac.uk> */
+UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999,
+		"Seagate",
+		"Expansion Desk",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_NO_REPORT_LUNS),
+
 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
 UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
 		"Seagate",

drivers/usb/storage/usb.c

@@ -482,7 +482,7 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 			US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
 			US_FL_INITIAL_READ10 | US_FL_WRITE_CACHE |
 			US_FL_NO_ATA_1X | US_FL_NO_REPORT_OPCODES |
-			US_FL_MAX_SECTORS_240);
+			US_FL_MAX_SECTORS_240 | US_FL_NO_REPORT_LUNS);
 
 	p = quirks;
 	while (*p) {
@@ -532,6 +532,9 @@ void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags)
 		case 'i':
 			f |= US_FL_IGNORE_DEVICE;
 			break;
+		case 'j':
+			f |= US_FL_NO_REPORT_LUNS;
+			break;
 		case 'l':
 			f |= US_FL_NOT_LOCKABLE;
 			break;

include/linux/usb_usual.h

@@ -79,6 +79,8 @@
 		/* Cannot handle MI_REPORT_SUPPORTED_OPERATION_CODES */	\
 	US_FLAG(MAX_SECTORS_240,	0x08000000)		\
 		/* Sets max_sectors to 240 */			\
+	US_FLAG(NO_REPORT_LUNS,	0x10000000)			\
+		/* Cannot handle REPORT_LUNS */			\
 
 #define US_FLAG(name, value)	US_FL_##name = value ,
 enum { US_DO_ALL_FLAGS };