Merge tag 'sunxi-clk-for-3.16-2' of https://github.com/mripard/linux …

…into clk-next

Rebase of Emilio's clk-sunxi-for-3.16 on top of clk-next

Fixed a few compilation warnings exposed by a patch introduced during the 3.16
merge window.

Original tag message:

Allwinner sunXi SoCs clock changes

This pull contains some new code to add support for A31 clocks by Maxime
and Boris. It also reworks the driver a bit to avoid having a huge
single file when we have a full folder for ourselves, and separating
different functional units makes sense.

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -20,12 +20,15 @@ Required properties:
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
+	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
+	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
+	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
@@ -41,6 +44,7 @@ Required properties:
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
 	"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
 	"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
+	"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.

drivers/clk/sunxi/Makefile

@@ -3,3 +3,7 @@
 #
 
 obj-y += clk-sunxi.o clk-factors.o
+obj-y += clk-a10-hosc.o
+obj-y += clk-a20-gmac.o
+
+obj-$(CONFIG_MFD_SUN6I_PRCM) += clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o

drivers/clk/sunxi/clk-a10-hosc.c

@@ -0,0 +1,73 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#define SUNXI_OSC24M_GATE	0
+
+static DEFINE_SPINLOCK(hosc_lock);
+
+static void __init sun4i_osc_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_fixed_rate *fixed;
+	struct clk_gate *gate;
+	const char *clk_name = node->name;
+	u32 rate;
+
+	if (of_property_read_u32(node, "clock-frequency", &rate))
+		return;
+
+	/* allocate fixed-rate and gate clock structs */
+	fixed = kzalloc(sizeof(struct clk_fixed_rate), GFP_KERNEL);
+	if (!fixed)
+		return;
+	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+	if (!gate)
+		goto err_free_fixed;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	/* set up gate and fixed rate properties */
+	gate->reg = of_iomap(node, 0);
+	gate->bit_idx = SUNXI_OSC24M_GATE;
+	gate->lock = &hosc_lock;
+	fixed->fixed_rate = rate;
+
+	clk = clk_register_composite(NULL, clk_name,
+			NULL, 0,
+			NULL, NULL,
+			&fixed->hw, &clk_fixed_rate_ops,
+			&gate->hw, &clk_gate_ops,
+			CLK_IS_ROOT);
+
+	if (IS_ERR(clk))
+		goto err_free_gate;
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	clk_register_clkdev(clk, clk_name, NULL);
+
+	return;
+
+err_free_gate:
+	kfree(gate);
+err_free_fixed:
+	kfree(fixed);
+}
+CLK_OF_DECLARE(sun4i_osc, "allwinner,sun4i-a10-osc-clk", sun4i_osc_clk_setup);

drivers/clk/sunxi/clk-a20-gmac.c

@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Emilio López
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * Copyright 2013 Chen-Yu Tsai
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+static DEFINE_SPINLOCK(gmac_lock);
+
+/**
+ * sun7i_a20_gmac_clk_setup - Setup function for A20/A31 GMAC clock module
+ *
+ * This clock looks something like this
+ *                               ________________________
+ *  MII TX clock from PHY >-----|___________    _________|----> to GMAC core
+ *  GMAC Int. RGMII TX clk >----|___________\__/__gate---|----> to PHY
+ *  Ext. 125MHz RGMII TX clk >--|__divider__/            |
+ *                              |________________________|
+ *
+ * The external 125 MHz reference is optional, i.e. GMAC can use its
+ * internal TX clock just fine. The A31 GMAC clock module does not have
+ * the divider controls for the external reference.
+ *
+ * To keep it simple, let the GMAC use either the MII TX clock for MII mode,
+ * and its internal TX clock for GMII and RGMII modes. The GMAC driver should
+ * select the appropriate source and gate/ungate the output to the PHY.
+ *
+ * Only the GMAC should use this clock. Altering the clock so that it doesn't
+ * match the GMAC's operation parameters will result in the GMAC not being
+ * able to send traffic out. The GMAC driver should set the clock rate and
+ * enable/disable this clock to configure the required state. The clock
+ * driver then responds by auto-reparenting the clock.
+ */
+
+#define SUN7I_A20_GMAC_GPIT	2
+#define SUN7I_A20_GMAC_MASK	0x3
+#define SUN7I_A20_GMAC_PARENTS	2
+
+static void __init sun7i_a20_gmac_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_mux *mux;
+	struct clk_gate *gate;
+	const char *clk_name = node->name;
+	const char *parents[SUN7I_A20_GMAC_PARENTS];
+	void *reg;
+
+	if (of_property_read_string(node, "clock-output-names", &clk_name))
+		return;
+
+	/* allocate mux and gate clock structs */
+	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
+	if (!mux)
+		return;
+
+	gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+	if (!gate)
+		goto free_mux;
+
+	/* gmac clock requires exactly 2 parents */
+	parents[0] = of_clk_get_parent_name(node, 0);
+	parents[1] = of_clk_get_parent_name(node, 1);
+	if (!parents[0] || !parents[1])
+		goto free_gate;
+
+	reg = of_iomap(node, 0);
+	if (!reg)
+		goto free_gate;
+
+	/* set up gate and fixed rate properties */
+	gate->reg = reg;
+	gate->bit_idx = SUN7I_A20_GMAC_GPIT;
+	gate->lock = &gmac_lock;
+	mux->reg = reg;
+	mux->mask = SUN7I_A20_GMAC_MASK;
+	mux->flags = CLK_MUX_INDEX_BIT;
+	mux->lock = &gmac_lock;
+
+	clk = clk_register_composite(NULL, clk_name,
+			parents, SUN7I_A20_GMAC_PARENTS,
+			&mux->hw, &clk_mux_ops,
+			NULL, NULL,
+			&gate->hw, &clk_gate_ops,
+			0);
+
+	if (IS_ERR(clk))
+		goto iounmap_reg;
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	clk_register_clkdev(clk, clk_name, NULL);
+
+	return;
+
+iounmap_reg:
+	iounmap(reg);
+free_gate:
+	kfree(gate);
+free_mux:
+	kfree(mux);
+}
+CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
+		sun7i_a20_gmac_clk_setup);

drivers/clk/sunxi/clk-sun6i-apb0-gates.c

@@ -0,0 +1,99 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * Allwinner A31 APB0 clock gates driver
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#define SUN6I_APB0_GATES_MAX_SIZE	32
+
+static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct clk_onecell_data *clk_data;
+	const char *clk_parent;
+	const char *clk_name;
+	struct resource *r;
+	void __iomem *reg;
+	int gate_id;
+	int ngates;
+	int i;
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(&pdev->dev, r);
+	if (!reg)
+		return PTR_ERR(reg);
+
+	clk_parent = of_clk_get_parent_name(np, 0);
+	if (!clk_parent)
+		return -EINVAL;
+
+	ngates = of_property_count_strings(np, "clock-output-names");
+	if (ngates < 0)
+		return ngates;
+
+	if (!ngates || ngates > SUN6I_APB0_GATES_MAX_SIZE)
+		return -EINVAL;
+
+	clk_data = devm_kzalloc(&pdev->dev, sizeof(struct clk_onecell_data),
+				GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->clks = devm_kzalloc(&pdev->dev,
+				      SUN6I_APB0_GATES_MAX_SIZE *
+				      sizeof(struct clk *),
+				      GFP_KERNEL);
+	if (!clk_data->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < ngates; i++) {
+		of_property_read_string_index(np, "clock-output-names",
+					      i, &clk_name);
+
+		gate_id = i;
+		of_property_read_u32_index(np, "clock-indices", i, &gate_id);
+
+		WARN_ON(gate_id >= SUN6I_APB0_GATES_MAX_SIZE);
+		if (gate_id >= SUN6I_APB0_GATES_MAX_SIZE)
+			continue;
+
+		clk_data->clks[gate_id] = clk_register_gate(&pdev->dev,
+							    clk_name,
+							    clk_parent, 0,
+							    reg, gate_id,
+							    0, NULL);
+		WARN_ON(IS_ERR(clk_data->clks[gate_id]));
+	}
+
+	clk_data->clk_num = ngates;
+
+	return of_clk_add_provider(np, of_clk_src_onecell_get, clk_data);
+}
+
+const struct of_device_id sun6i_a31_apb0_gates_clk_dt_ids[] = {
+	{ .compatible = "allwinner,sun6i-a31-apb0-gates-clk" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver sun6i_a31_apb0_gates_clk_driver = {
+	.driver = {
+		.name = "sun6i-a31-apb0-gates-clk",
+		.owner = THIS_MODULE,
+		.of_match_table = sun6i_a31_apb0_gates_clk_dt_ids,
+	},
+	.probe = sun6i_a31_apb0_gates_clk_probe,
+};
+module_platform_driver(sun6i_a31_apb0_gates_clk_driver);
+
+MODULE_AUTHOR("Boris BREZILLON <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A31 APB0 gate clocks driver");
+MODULE_LICENSE("GPL v2");