i7300_idle: Remove this driver

In preparation for removing the idle_notifier, remove its only user, the
i7300_idle driver.

i7300_idle was deployed in 2008 to reduce idle memory power on systems
using the i7300 chipset.  The driver worked by throttling the
fully-buffered DIMMs during idle periods using the IOAT DMA engine.

The driver ran only on the i7300 chip-set, and no other hardware has used
this mechanism.  The driver no longer has a maintainer.

Removing this driver will increase idle power on i7300 systems when they
run the new kernel without the driver.

Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/ad6a044e57cc75f44cc8621abe846e58f7882243.1479449716.git.len.brown@intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

MAINTAINERS

@@ -6087,12 +6087,6 @@ S:	Maintained
 F:	Documentation/cdrom/ide-cd
 F:	drivers/ide/ide-cd*
 
-IDLE-I7300
-M:	Andy Henroid <andrew.d.henroid@intel.com>
-L:	linux-pm@vger.kernel.org
-S:	Supported
-F:	drivers/idle/i7300_idle.c
-
 IEEE 802.15.4 SUBSYSTEM
 M:	Alexander Aring <aar@pengutronix.de>
 L:	linux-wpan@vger.kernel.org

drivers/dma/ioat/registers.h

@@ -106,8 +106,6 @@
 #define IOAT_DMA_COMP_V1			0x0001	/* Compatibility with DMA version 1 */
 #define IOAT_DMA_COMP_V2			0x0002	/* Compatibility with DMA version 2 */
 
-/* IOAT1 define left for i7300_idle driver to not fail compiling */
-#define IOAT1_CHANSTS_OFFSET		0x04
 #define IOAT_CHANSTS_OFFSET		0x08	/* 64-bit Channel Status Register */
 #define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR	(~0x3fULL)
 #define IOAT_CHANSTS_SOFT_ERR			0x10ULL

drivers/idle/Kconfig

@@ -8,20 +8,3 @@ config INTEL_IDLE
 	  native Intel hardware idle features.  The acpi_idle driver
 	  can be configured at the same time, in order to handle
 	  processors intel_idle does not support.
-
-menu "Memory power savings"
-depends on X86_64
-
-config I7300_IDLE_IOAT_CHANNEL
-	bool
-
-config I7300_IDLE
-	tristate "Intel chipset idle memory power saving driver"
-	select I7300_IDLE_IOAT_CHANNEL
-	help
-	  Enable memory power savings when idle with certain Intel server
-	  chipsets. The chipset must have I/O AT support, such as the
-	  Intel 7300. The power savings depends on the type and quantity of
-	  DRAM devices.
-
-endmenu

drivers/idle/Makefile

@@ -1,3 +1,2 @@
-obj-$(CONFIG_I7300_IDLE)			+= i7300_idle.o
 obj-$(CONFIG_INTEL_IDLE)			+= intel_idle.o