Merge branches 'x86/vt-d', 'arm/omap', 'arm/smmu', 's390', 'core' and…

… 'x86/amd' into next

Conflicts:
	drivers/iommu/amd_iommu_types.h

Documentation/devicetree/bindings/iommu/arm,smmu-v3.txt

@@ -36,5 +36,24 @@ the PCIe specification.
                       NOTE: this only applies to the SMMU itself, not
                       masters connected upstream of the SMMU.
 
+- msi-parent        : See the generic MSI binding described in
+                        devicetree/bindings/interrupt-controller/msi.txt
+                      for a description of the msi-parent property.
+
 - hisilicon,broken-prefetch-cmd
                     : Avoid sending CMD_PREFETCH_* commands to the SMMU.
+
+** Example
+
+        smmu@2b400000 {
+                compatible = "arm,smmu-v3";
+                reg = <0x0 0x2b400000 0x0 0x20000>;
+                interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
+                             <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
+                             <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
+                             <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
+                interrupt-names = "eventq", "priq", "cmdq-sync", "gerror";
+                dma-coherent;
+                #iommu-cells = <0>;
+                msi-parent = <&its 0xff0000>;
+        };

Documentation/devicetree/bindings/iommu/ti,omap-iommu.txt

@@ -4,6 +4,7 @@ Required properties:
 - compatible : Should be one of,
 		"ti,omap2-iommu" for OMAP2/OMAP3 IOMMU instances
 		"ti,omap4-iommu" for OMAP4/OMAP5 IOMMU instances
+		"ti,dra7-dsp-iommu" for DRA7xx DSP IOMMU instances
 		"ti,dra7-iommu" for DRA7xx IOMMU instances
 - ti,hwmods  : Name of the hwmod associated with the IOMMU instance
 - reg        : Address space for the configuration registers
@@ -19,6 +20,13 @@ Optional properties:
                     Should be either 8 or 32 (default: 32)
 - ti,iommu-bus-err-back : Indicates the IOMMU instance supports throwing
 		          back a bus error response on MMU faults.
+- ti,syscon-mmuconfig : Should be a pair of the phandle to the DSP_SYSTEM
+                        syscon node that contains the additional control
+                        register for enabling the MMU, and the MMU instance
+                        number (0-indexed) within the sub-system. This property
+                        is required for DSP IOMMU instances on DRA7xx SoCs. The
+                        instance number should be 0 for DSP MDMA MMUs and 1 for
+                        DSP EDMA MMUs.
 
 Example:
 	/* OMAP3 ISP MMU */
@@ -30,3 +38,22 @@ Example:
 		ti,hwmods = "mmu_isp";
 		ti,#tlb-entries = <8>;
 	};
+
+	/* DRA74x DSP2 MMUs */
+	mmu0_dsp2: mmu@41501000 {
+		compatible = "ti,dra7-dsp-iommu";
+		reg = <0x41501000 0x100>;
+		interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "mmu0_dsp2";
+		#iommu-cells = <0>;
+		ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+	};
+
+	mmu1_dsp2: mmu@41502000 {
+		compatible = "ti,dra7-dsp-iommu";
+		reg = <0x41502000 0x100>;
+		interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		ti,hwmods = "mmu1_dsp2";
+		#iommu-cells = <0>;
+		ti,syscon-mmuconfig = <&dsp2_system 0x1>;
+	};

MAINTAINERS

@@ -8966,6 +8966,13 @@ F:	drivers/s390/net/*iucv*
 F:	include/net/iucv/
 F:	net/iucv/
 
+S390 IOMMU (PCI)
+M:	Gerald Schaefer <gerald.schaefer@de.ibm.com>
+L:	linux-s390@vger.kernel.org
+W:	http://www.ibm.com/developerworks/linux/linux390/
+S:	Supported
+F:	drivers/iommu/s390-iommu.c
+
 S3C24XX SD/MMC Driver
 M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm64/Kconfig

@@ -75,6 +75,7 @@ config ARM64
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_RCU_TABLE_FREE
 	select HAVE_SYSCALL_TRACEPOINTS
+	select IOMMU_DMA if IOMMU_SUPPORT
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA

arch/arm64/include/asm/dma-mapping.h

@@ -54,16 +54,15 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
 		return __generic_dma_ops(dev);
 }
 
-static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
-				      struct iommu_ops *iommu, bool coherent)
-{
-	if (!acpi_disabled && !dev->archdata.dma_ops)
-		dev->archdata.dma_ops = dma_ops;
-
-	dev->archdata.dma_coherent = coherent;
-}
+void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+			struct iommu_ops *iommu, bool coherent);
 #define arch_setup_dma_ops	arch_setup_dma_ops
 
+#ifdef CONFIG_IOMMU_DMA
+void arch_teardown_dma_ops(struct device *dev);
+#define arch_teardown_dma_ops	arch_teardown_dma_ops
+#endif
+
 /* do not use this function in a driver */
 static inline bool is_device_dma_coherent(struct device *dev)
 {