Merge branch 'bnx2x-next'

Yuval Mintz says:

====================
bnx2x: Enhancement patch series

This patch series introduces the ability to propagate link parameters
to VFs as well as control the VF link via hypervisor.

In addition, it contains 2 small improvements [one IOV-related and the
other improves performance on machines with short cache lines].

Please consider applying these patches to `net-next'.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x.h

@@ -1482,6 +1482,7 @@ struct bnx2x {
 	union pf_vf_bulletin   *pf2vf_bulletin;
 	dma_addr_t		pf2vf_bulletin_mapping;
 
+	union pf_vf_bulletin		shadow_bulletin;
 	struct pf_vf_bulletin_content	old_bulletin;
 
 	u16 requested_nr_virtfn;
@@ -1507,8 +1508,10 @@ struct bnx2x {
 /* TCP with Timestamp Option (32) + IPv6 (40) */
 #define ETH_MAX_TPA_HEADER_SIZE		72
 
-	/* Max supported alignment is 256 (8 shift) */
-#define BNX2X_RX_ALIGN_SHIFT		min(8, L1_CACHE_SHIFT)
+	/* Max supported alignment is 256 (8 shift)
+	 * minimal alignment shift 6 is optimal for 57xxx HW performance
+	 */
+#define BNX2X_RX_ALIGN_SHIFT		max(6, min(8, L1_CACHE_SHIFT))
 
 	/* FW uses 2 Cache lines Alignment for start packet and size
 	 *
@@ -1928,6 +1931,8 @@ struct bnx2x {
 	struct semaphore			stats_sema;
 
 	u8					phys_port_id[ETH_ALEN];
+
+	struct bnx2x_link_report_data		vf_link_vars;
 };
 
 /* Tx queues may be less or equal to Rx queues */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -1185,29 +1185,38 @@ u16 bnx2x_get_mf_speed(struct bnx2x *bp)
 static void bnx2x_fill_report_data(struct bnx2x *bp,
 				   struct bnx2x_link_report_data *data)
 {
-	u16 line_speed = bnx2x_get_mf_speed(bp);
-
 	memset(data, 0, sizeof(*data));
 
-	/* Fill the report data: effective line speed */
-	data->line_speed = line_speed;
-
-	/* Link is down */
-	if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
-		__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
-			  &data->link_report_flags);
-
-	/* Full DUPLEX */
-	if (bp->link_vars.duplex == DUPLEX_FULL)
-		__set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags);
-
-	/* Rx Flow Control is ON */
-	if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
-		__set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags);
-
-	/* Tx Flow Control is ON */
-	if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
-		__set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags);
+	if (IS_PF(bp)) {
+		/* Fill the report data: effective line speed */
+		data->line_speed = bnx2x_get_mf_speed(bp);
+
+		/* Link is down */
+		if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS))
+			__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+				  &data->link_report_flags);
+
+		if (!BNX2X_NUM_ETH_QUEUES(bp))
+			__set_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+				  &data->link_report_flags);
+
+		/* Full DUPLEX */
+		if (bp->link_vars.duplex == DUPLEX_FULL)
+			__set_bit(BNX2X_LINK_REPORT_FD,
+				  &data->link_report_flags);
+
+		/* Rx Flow Control is ON */
+		if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX)
+			__set_bit(BNX2X_LINK_REPORT_RX_FC_ON,
+				  &data->link_report_flags);
+
+		/* Tx Flow Control is ON */
+		if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX)
+			__set_bit(BNX2X_LINK_REPORT_TX_FC_ON,
+				  &data->link_report_flags);
+	} else { /* VF */
+		*data = bp->vf_link_vars;
+	}
 }
 
 /**
@@ -1261,6 +1270,10 @@ void __bnx2x_link_report(struct bnx2x *bp)
 	 */
 	memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data));
 
+	/* propagate status to VFs */
+	if (IS_PF(bp))
+		bnx2x_iov_link_update(bp);
+
 	if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
 		     &cur_data.link_report_flags)) {
 		netif_carrier_off(bp->dev);

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -216,6 +216,43 @@ static int bnx2x_get_port_type(struct bnx2x *bp)
 	return port_type;
 }
 
+static int bnx2x_get_vf_settings(struct net_device *dev,
+				 struct ethtool_cmd *cmd)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+
+	if (bp->state == BNX2X_STATE_OPEN) {
+		if (test_bit(BNX2X_LINK_REPORT_FD,
+			     &bp->vf_link_vars.link_report_flags))
+			cmd->duplex = DUPLEX_FULL;
+		else
+			cmd->duplex = DUPLEX_HALF;
+
+		ethtool_cmd_speed_set(cmd, bp->vf_link_vars.line_speed);
+	} else {
+		cmd->duplex = DUPLEX_UNKNOWN;
+		ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
+	}
+
+	cmd->port		= PORT_OTHER;
+	cmd->phy_address	= 0;
+	cmd->transceiver	= XCVR_INTERNAL;
+	cmd->autoneg		= AUTONEG_DISABLE;
+	cmd->maxtxpkt		= 0;
+	cmd->maxrxpkt		= 0;
+
+	DP(BNX2X_MSG_ETHTOOL, "ethtool_cmd: cmd %d\n"
+	   "  supported 0x%x  advertising 0x%x  speed %u\n"
+	   "  duplex %d  port %d  phy_address %d  transceiver %d\n"
+	   "  autoneg %d  maxtxpkt %d  maxrxpkt %d\n",
+	   cmd->cmd, cmd->supported, cmd->advertising,
+	   ethtool_cmd_speed(cmd),
+	   cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver,
+	   cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt);
+
+	return 0;
+}
+
 static int bnx2x_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -1110,6 +1147,10 @@ static u32 bnx2x_get_link(struct net_device *dev)
 	if (bp->flags & MF_FUNC_DIS || (bp->state != BNX2X_STATE_OPEN))
 		return 0;
 
+	if (IS_VF(bp))
+		return !test_bit(BNX2X_LINK_REPORT_LINK_DOWN,
+				 &bp->vf_link_vars.link_report_flags);
+
 	return bp->link_vars.link_up;
 }
 
@@ -3484,8 +3525,7 @@ static const struct ethtool_ops bnx2x_ethtool_ops = {
 };
 
 static const struct ethtool_ops bnx2x_vf_ethtool_ops = {
-	.get_settings		= bnx2x_get_settings,
-	.set_settings		= bnx2x_set_settings,
+	.get_settings		= bnx2x_get_vf_settings,
 	.get_drvinfo		= bnx2x_get_drvinfo,
 	.get_msglevel		= bnx2x_get_msglevel,
 	.set_msglevel		= bnx2x_set_msglevel,

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -2698,6 +2698,14 @@ void bnx2x__link_status_update(struct bnx2x *bp)
 		bp->link_vars.duplex = DUPLEX_FULL;
 		bp->link_vars.flow_ctrl = BNX2X_FLOW_CTRL_NONE;
 		__bnx2x_link_report(bp);
+
+		bnx2x_sample_bulletin(bp);
+
+		/* if bulletin board did not have an update for link status
+		 * __bnx2x_link_report will report current status
+		 * but it will NOT duplicate report in case of already reported
+		 * during sampling bulletin board.
+		 */
 		bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
 	}
 }
@@ -12424,6 +12432,7 @@ static const struct net_device_ops bnx2x_netdev_ops = {
 	.ndo_busy_poll		= bnx2x_low_latency_recv,
 #endif
 	.ndo_get_phys_port_id	= bnx2x_get_phys_port_id,
+	.ndo_set_vf_link_state	= bnx2x_set_vf_link_state,
 };
 
 static int bnx2x_set_coherency_mask(struct bnx2x *bp)