Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…rzhang/linux

Pull thermal management update from Zhang Rui:

 - Fix race condition in imx_thermal_probe() (Mikhail Lappo)

 - Add cooling device's statistics in sysfs (Viresh Kumar)

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: Add cooling device's statistics in sysfs
  thermal: imx: Fix race condition in imx_thermal_probe()

Documentation/thermal/sysfs-api.txt

@@ -255,6 +255,7 @@ temperature) and throttle appropriate devices.
 2. sysfs attributes structure
 
 RO	read only value
+WO	write only value
 RW	read/write value
 
 Thermal sysfs attributes will be represented under /sys/class/thermal.
@@ -286,6 +287,11 @@ Thermal cooling device sys I/F, created once it's registered:
     |---type:			Type of the cooling device(processor/fan/...)
     |---max_state:		Maximum cooling state of the cooling device
     |---cur_state:		Current cooling state of the cooling device
+    |---stats:			Directory containing cooling device's statistics
+    |---stats/reset:		Writing any value resets the statistics
+    |---stats/time_in_state_ms:	Time (msec) spent in various cooling states
+    |---stats/total_trans:	Total number of times cooling state is changed
+    |---stats/trans_table:	Cooing state transition table
 
 
 Then next two dynamic attributes are created/removed in pairs. They represent
@@ -490,6 +496,31 @@ cur_state
 	- cur_state == max_state means the maximum cooling.
 	RW, Required
 
+stats/reset
+	Writing any value resets the cooling device's statistics.
+	WO, Required
+
+stats/time_in_state_ms:
+	The amount of time spent by the cooling device in various cooling
+	states. The output will have "<state> <time>" pair in each line, which
+	will mean this cooling device spent <time> msec of time at <state>.
+	Output will have one line for each of the supported states.  usertime
+	units here is 10mS (similar to other time exported in /proc).
+	RO, Required
+
+stats/total_trans:
+	A single positive value showing the total number of times the state of a
+	cooling device is changed.
+	RO, Required
+
+stats/trans_table:
+	This gives fine grained information about all the cooling state
+	transitions. The cat output here is a two dimensional matrix, where an
+	entry <i,j> (row i, column j) represents the number of transitions from
+	State_i to State_j. If the transition table is bigger than PAGE_SIZE,
+	reading this will return an -EFBIG error.
+	RO, Required
+
 3. A simple implementation
 
 ACPI thermal zone may support multiple trip points like critical, hot,

drivers/thermal/Kconfig

@@ -15,6 +15,13 @@ menuconfig THERMAL
 
 if THERMAL
 
+config THERMAL_STATISTICS
+	bool "Thermal state transition statistics"
+	help
+	  Export thermal state transition statistics information through sysfs.
+
+	  If in doubt, say N.
+
 config THERMAL_EMERGENCY_POWEROFF_DELAY_MS
 	int "Emergency poweroff delay in milli-seconds"
 	depends on THERMAL

drivers/thermal/imx_thermal.c

@@ -637,6 +637,9 @@ static int imx_thermal_probe(struct platform_device *pdev)
 	regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
 	regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
 
+	data->irq_enabled = true;
+	data->mode = THERMAL_DEVICE_ENABLED;
+
 	ret = devm_request_threaded_irq(&pdev->dev, data->irq,
 			imx_thermal_alarm_irq, imx_thermal_alarm_irq_thread,
 			0, "imx_thermal", data);
@@ -649,9 +652,6 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	data->irq_enabled = true;
-	data->mode = THERMAL_DEVICE_ENABLED;
-
 	return 0;
 }
 

drivers/thermal/thermal_core.c

@@ -972,8 +972,8 @@ __thermal_cooling_device_register(struct device_node *np,
 	cdev->ops = ops;
 	cdev->updated = false;
 	cdev->device.class = &thermal_class;
-	thermal_cooling_device_setup_sysfs(cdev);
 	cdev->devdata = devdata;
+	thermal_cooling_device_setup_sysfs(cdev);
 	dev_set_name(&cdev->device, "cooling_device%d", cdev->id);
 	result = device_register(&cdev->device);
 	if (result) {
@@ -1106,6 +1106,7 @@ void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
 
 	ida_simple_remove(&thermal_cdev_ida, cdev->id);
 	device_unregister(&cdev->device);
+	thermal_cooling_device_destroy_sysfs(cdev);
 }
 EXPORT_SYMBOL_GPL(thermal_cooling_device_unregister);
 

drivers/thermal/thermal_core.h

@@ -73,6 +73,7 @@ int thermal_build_list_of_policies(char *buf);
 int thermal_zone_create_device_groups(struct thermal_zone_device *, int);
 void thermal_zone_destroy_device_groups(struct thermal_zone_device *);
 void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *);
+void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev);
 /* used only at binding time */
 ssize_t
 thermal_cooling_device_trip_point_show(struct device *,
@@ -84,6 +85,15 @@ ssize_t thermal_cooling_device_weight_store(struct device *,
 					    struct device_attribute *,
 					    const char *, size_t);
 
+#ifdef CONFIG_THERMAL_STATISTICS
+void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
+					 unsigned long new_state);
+#else
+static inline void
+thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
+				    unsigned long new_state) {}
+#endif /* CONFIG_THERMAL_STATISTICS */
+
 #ifdef CONFIG_THERMAL_GOV_STEP_WISE
 int thermal_gov_step_wise_register(void);
 void thermal_gov_step_wise_unregister(void);

drivers/thermal/thermal_helpers.c

@@ -187,7 +187,10 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
 		if (instance->target > target)
 			target = instance->target;
 	}
-	cdev->ops->set_cur_state(cdev, target);
+
+	if (!cdev->ops->set_cur_state(cdev, target))
+		thermal_cooling_device_stats_update(cdev, target);
+
 	cdev->updated = true;
 	mutex_unlock(&cdev->lock);
 	trace_cdev_update(cdev, target);

drivers/thermal/thermal_sysfs.c

@@ -20,6 +20,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <linux/jiffies.h>
 
 #include "thermal_core.h"
 
@@ -721,6 +722,7 @@ thermal_cooling_device_cur_state_store(struct device *dev,
 	result = cdev->ops->set_cur_state(cdev, state);
 	if (result)
 		return result;
+	thermal_cooling_device_stats_update(cdev, state);
 	return count;
 }
 
@@ -745,14 +747,237 @@ static const struct attribute_group cooling_device_attr_group = {
 
 static const struct attribute_group *cooling_device_attr_groups[] = {
 	&cooling_device_attr_group,
+	NULL, /* Space allocated for cooling_device_stats_attr_group */
 	NULL,
 };
 
+#ifdef CONFIG_THERMAL_STATISTICS
+struct cooling_dev_stats {
+	spinlock_t lock;
+	unsigned int total_trans;
+	unsigned long state;
+	unsigned long max_states;
+	ktime_t last_time;
+	ktime_t *time_in_state;
+	unsigned int *trans_table;
+};
+
+static void update_time_in_state(struct cooling_dev_stats *stats)
+{
+	ktime_t now = ktime_get(), delta;
+
+	delta = ktime_sub(now, stats->last_time);
+	stats->time_in_state[stats->state] =
+		ktime_add(stats->time_in_state[stats->state], delta);
+	stats->last_time = now;
+}
+
+void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
+					 unsigned long new_state)
+{
+	struct cooling_dev_stats *stats = cdev->stats;
+
+	spin_lock(&stats->lock);
+
+	if (stats->state == new_state)
+		goto unlock;
+
+	update_time_in_state(stats);
+	stats->trans_table[stats->state * stats->max_states + new_state]++;
+	stats->state = new_state;
+	stats->total_trans++;
+
+unlock:
+	spin_unlock(&stats->lock);
+}
+
+static ssize_t
+thermal_cooling_device_total_trans_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	int ret;
+
+	spin_lock(&stats->lock);
+	ret = sprintf(buf, "%u\n", stats->total_trans);
+	spin_unlock(&stats->lock);
+
+	return ret;
+}
+
+static ssize_t
+thermal_cooling_device_time_in_state_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	ssize_t len = 0;
+	int i;
+
+	spin_lock(&stats->lock);
+	update_time_in_state(stats);
+
+	for (i = 0; i < stats->max_states; i++) {
+		len += sprintf(buf + len, "state%u\t%llu\n", i,
+			       ktime_to_ms(stats->time_in_state[i]));
+	}
+	spin_unlock(&stats->lock);
+
+	return len;
+}
+
+static ssize_t
+thermal_cooling_device_reset_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	int i, states = stats->max_states;
+
+	spin_lock(&stats->lock);
+
+	stats->total_trans = 0;
+	stats->last_time = ktime_get();
+	memset(stats->trans_table, 0,
+	       states * states * sizeof(*stats->trans_table));
+
+	for (i = 0; i < stats->max_states; i++)
+		stats->time_in_state[i] = ktime_set(0, 0);
+
+	spin_unlock(&stats->lock);
+
+	return count;
+}
+
+static ssize_t
+thermal_cooling_device_trans_table_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct thermal_cooling_device *cdev = to_cooling_device(dev);
+	struct cooling_dev_stats *stats = cdev->stats;
+	ssize_t len = 0;
+	int i, j;
+
+	len += snprintf(buf + len, PAGE_SIZE - len, " From  :    To\n");
+	len += snprintf(buf + len, PAGE_SIZE - len, "       : ");
+	for (i = 0; i < stats->max_states; i++) {
+		if (len >= PAGE_SIZE)
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len, "state%2u  ", i);
+	}
+	if (len >= PAGE_SIZE)
+		return PAGE_SIZE;
+
+	len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+
+	for (i = 0; i < stats->max_states; i++) {
+		if (len >= PAGE_SIZE)
+			break;
+
+		len += snprintf(buf + len, PAGE_SIZE - len, "state%2u:", i);
+
+		for (j = 0; j < stats->max_states; j++) {
+			if (len >= PAGE_SIZE)
+				break;
+			len += snprintf(buf + len, PAGE_SIZE - len, "%8u ",
+				stats->trans_table[i * stats->max_states + j]);
+		}
+		if (len >= PAGE_SIZE)
+			break;
+		len += snprintf(buf + len, PAGE_SIZE - len, "\n");
+	}
+
+	if (len >= PAGE_SIZE) {
+		pr_warn_once("Thermal transition table exceeds PAGE_SIZE. Disabling\n");
+		return -EFBIG;
+	}
+	return len;
+}
+
+static DEVICE_ATTR(total_trans, 0444, thermal_cooling_device_total_trans_show,
+		   NULL);
+static DEVICE_ATTR(time_in_state_ms, 0444,
+		   thermal_cooling_device_time_in_state_show, NULL);
+static DEVICE_ATTR(reset, 0200, NULL, thermal_cooling_device_reset_store);
+static DEVICE_ATTR(trans_table, 0444,
+		   thermal_cooling_device_trans_table_show, NULL);
+
+static struct attribute *cooling_device_stats_attrs[] = {
+	&dev_attr_total_trans.attr,
+	&dev_attr_time_in_state_ms.attr,
+	&dev_attr_reset.attr,
+	&dev_attr_trans_table.attr,
+	NULL
+};
+
+static const struct attribute_group cooling_device_stats_attr_group = {
+	.attrs = cooling_device_stats_attrs,
+	.name = "stats"
+};
+
+static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
+{
+	struct cooling_dev_stats *stats;
+	unsigned long states;
+	int var;
+
+	if (cdev->ops->get_max_state(cdev, &states))
+		return;
+
+	states++; /* Total number of states is highest state + 1 */
+
+	var = sizeof(*stats);
+	var += sizeof(*stats->time_in_state) * states;
+	var += sizeof(*stats->trans_table) * states * states;
+
+	stats = kzalloc(var, GFP_KERNEL);
+	if (!stats)
+		return;
+
+	stats->time_in_state = (ktime_t *)(stats + 1);
+	stats->trans_table = (unsigned int *)(stats->time_in_state + states);
+	cdev->stats = stats;
+	stats->last_time = ktime_get();
+	stats->max_states = states;
+
+	spin_lock_init(&stats->lock);
+
+	/* Fill the empty slot left in cooling_device_attr_groups */
+	var = ARRAY_SIZE(cooling_device_attr_groups) - 2;
+	cooling_device_attr_groups[var] = &cooling_device_stats_attr_group;
+}
+
+static void cooling_device_stats_destroy(struct thermal_cooling_device *cdev)
+{
+	kfree(cdev->stats);
+	cdev->stats = NULL;
+}
+
+#else
+
+static inline void
+cooling_device_stats_setup(struct thermal_cooling_device *cdev) {}
+static inline void
+cooling_device_stats_destroy(struct thermal_cooling_device *cdev) {}
+
+#endif /* CONFIG_THERMAL_STATISTICS */
+
 void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *cdev)
 {
+	cooling_device_stats_setup(cdev);
 	cdev->device.groups = cooling_device_attr_groups;
 }
 
+void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev)
+{
+	cooling_device_stats_destroy(cdev);
+}
+
 /* these helper will be used only at the time of bindig */
 ssize_t
 thermal_cooling_device_trip_point_show(struct device *dev,