Merge tag 'linux-watchdog-5.5-fixes' of git://www.linux-watchdog.org/…

…linux-watchdog

Pull watchdog fixes from Wim Van Sebroeck:
 - fix module aliases
 - fix potential build errors
 - fix missing conversion of imx7ulp_wdt_enable()
 - fix platform_get_irq() complaints
 - fix NCT6116D support

* tag 'linux-watchdog-5.5-fixes' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: orion: fix platform_get_irq() complaints
  watchdog: rn5t618_wdt: fix module aliases
  watchdog: tqmx86_wdt: Fix build error
  watchdog: max77620_wdt: fix potential build errors
  watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()
  watchdog: w83627hf_wdt: Fix support NCT6116D

drivers/watchdog/Kconfig

@@ -687,6 +687,7 @@ config MAX63XX_WATCHDOG
 config MAX77620_WATCHDOG
 	tristate "Maxim Max77620 Watchdog Timer"
 	depends on MFD_MAX77620 || COMPILE_TEST
+	select WATCHDOG_CORE
 	help
 	 This is the driver for the Max77620 watchdog timer.
 	 Say 'Y' here to enable the watchdog timer support for
@@ -1444,6 +1445,7 @@ config SMSC37B787_WDT
 config TQMX86_WDT
 	tristate "TQ-Systems TQMX86 Watchdog Timer"
 	depends on X86
+	select WATCHDOG_CORE
 	help
 	This is the driver for the hardware watchdog timer in the TQMX86 IO
 	controller found on some of their ComExpress Modules.

drivers/watchdog/imx7ulp_wdt.c

@@ -112,7 +112,7 @@ static int imx7ulp_wdt_restart(struct watchdog_device *wdog,
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 
-	imx7ulp_wdt_enable(wdt->base, true);
+	imx7ulp_wdt_enable(wdog, true);
 	imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
 
 	/* wait for wdog to fire */

drivers/watchdog/orion_wdt.c

@@ -602,7 +602,7 @@ static int orion_wdt_probe(struct platform_device *pdev)
 		set_bit(WDOG_HW_RUNNING, &dev->wdt.status);
 
 	/* Request the IRQ only after the watchdog is disabled */
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq > 0) {
 		/*
 		 * Not all supported platforms specify an interrupt for the
@@ -617,7 +617,7 @@ static int orion_wdt_probe(struct platform_device *pdev)
 	}
 
 	/* Optional 2nd interrupt for pretimeout */
-	irq = platform_get_irq(pdev, 1);
+	irq = platform_get_irq_optional(pdev, 1);
 	if (irq > 0) {
 		orion_wdt_info.options |= WDIOF_PRETIMEOUT;
 		ret = devm_request_irq(&pdev->dev, irq, orion_wdt_pre_irq,

drivers/watchdog/rn5t618_wdt.c

@@ -188,6 +188,7 @@ static struct platform_driver rn5t618_wdt_driver = {
 
 module_platform_driver(rn5t618_wdt_driver);
 
+MODULE_ALIAS("platform:rn5t618-wdt");
 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
 MODULE_DESCRIPTION("RN5T618 watchdog driver");
 MODULE_LICENSE("GPL v2");

drivers/watchdog/w83627hf_wdt.c

@@ -420,7 +420,7 @@ static int wdt_find(int addr)
 		cr_wdt_csr = NCT6102D_WDT_CSR;
 		break;
 	case NCT6116_ID:
-		ret = nct6102;
+		ret = nct6116;
 		cr_wdt_timeout = NCT6102D_WDT_TIMEOUT;
 		cr_wdt_control = NCT6102D_WDT_CONTROL;
 		cr_wdt_csr = NCT6102D_WDT_CSR;