drm/i915: Move the TypeC port handling code to a separate file

Move the TypeC port handling functions to a new file for clarity.

While at it:
- s/icl_tc_port_connected()/intel_tc_port_connected()/
  icl_tc_phy_disconnect(), will be unexported later.

- s/intel_dp_get_fia_supported_lane_count()/
    intel_tc_port_fia_max_lane_count()/
  It's used for HDMI legacy mode too.

- Simplify function interfaces by passing only dig_port to them.

No functional changes.

v2:
- Fix checkpatch issues: +1/-1 empty lines in intel_tc.c and add
  missing SPDX to intel_tc.h. (Jani)

Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190628143635.22066-4-imre.deak@intel.com

drivers/gpu/drm/i915/Makefile

@@ -175,7 +175,8 @@ i915-y += \
 	display/intel_overlay.o \
 	display/intel_psr.o \
 	display/intel_quirks.o \
-	display/intel_sprite.o
+	display/intel_sprite.o \
+	display/intel_tc.o
 i915-$(CONFIG_ACPI) += \
 	display/intel_acpi.o \
 	display/intel_opregion.o

drivers/gpu/drm/i915/display/intel_ddi.c

@@ -45,6 +45,7 @@
 #include "intel_lspcon.h"
 #include "intel_panel.h"
 #include "intel_psr.h"
+#include "intel_tc.h"
 #include "intel_vdsc.h"
 
 struct ddi_buf_trans {
@@ -3917,7 +3918,6 @@ static int intel_ddi_compute_config(struct intel_encoder *encoder,
 static void intel_ddi_encoder_suspend(struct intel_encoder *encoder)
 {
 	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
-	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 
 	intel_dp_encoder_suspend(encoder);
 
@@ -3927,7 +3927,7 @@ static void intel_ddi_encoder_suspend(struct intel_encoder *encoder)
 	 * even if the sink has disappeared while being suspended.
 	 */
 	if (dig_port->tc_legacy_port)
-		icl_tc_phy_disconnect(i915, dig_port);
+		icl_tc_phy_disconnect(dig_port);
 }
 
 static void intel_ddi_encoder_reset(struct drm_encoder *drm_encoder)
@@ -3949,7 +3949,7 @@ static void intel_ddi_encoder_destroy(struct drm_encoder *encoder)
 	intel_dp_encoder_flush_work(encoder);
 
 	if (intel_port_is_tc(i915, dig_port->base.port))
-		icl_tc_phy_disconnect(i915, dig_port);
+		icl_tc_phy_disconnect(dig_port);
 
 	drm_encoder_cleanup(encoder);
 	kfree(dig_port);

drivers/gpu/drm/i915/display/intel_dp.c

@@ -62,6 +62,7 @@
 #include "intel_panel.h"
 #include "intel_psr.h"
 #include "intel_sideband.h"
+#include "intel_tc.h"
 #include "intel_vdsc.h"
 
 #define DP_DPRX_ESI_LEN 14
@@ -211,46 +212,13 @@ static int intel_dp_max_common_rate(struct intel_dp *intel_dp)
 	return intel_dp->common_rates[intel_dp->num_common_rates - 1];
 }
 
-static int intel_dp_get_fia_supported_lane_count(struct intel_dp *intel_dp)
-{
-	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
-	struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
-	enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port->base.port);
-	intel_wakeref_t wakeref;
-	u32 lane_info;
-
-	if (tc_port == PORT_TC_NONE || dig_port->tc_type != TC_PORT_TYPEC)
-		return 4;
-
-	lane_info = 0;
-	with_intel_display_power(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref)
-		lane_info = (I915_READ(PORT_TX_DFLEXDPSP) &
-			     DP_LANE_ASSIGNMENT_MASK(tc_port)) >>
-				DP_LANE_ASSIGNMENT_SHIFT(tc_port);
-
-	switch (lane_info) {
-	default:
-		MISSING_CASE(lane_info);
-	case 1:
-	case 2:
-	case 4:
-	case 8:
-		return 1;
-	case 3:
-	case 12:
-		return 2;
-	case 15:
-		return 4;
-	}
-}
-
 /* Theoretical max between source and sink */
 static int intel_dp_max_common_lane_count(struct intel_dp *intel_dp)
 {
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	int source_max = intel_dig_port->max_lanes;
 	int sink_max = drm_dp_max_lane_count(intel_dp->dpcd);
-	int fia_max = intel_dp_get_fia_supported_lane_count(intel_dp);
+	int fia_max = intel_tc_port_fia_max_lane_count(intel_dig_port);
 
 	return min3(source_max, sink_max, fia_max);
 }
@@ -5232,195 +5200,6 @@ static bool icl_combo_port_connected(struct drm_i915_private *dev_priv,
 	return I915_READ(SDEISR) & SDE_DDI_HOTPLUG_ICP(port);
 }
 
-static const char *tc_type_name(enum tc_port_type type)
-{
-	static const char * const names[] = {
-		[TC_PORT_UNKNOWN] = "unknown",
-		[TC_PORT_LEGACY] = "legacy",
-		[TC_PORT_TYPEC] = "typec",
-		[TC_PORT_TBT] = "tbt",
-	};
-
-	if (WARN_ON(type >= ARRAY_SIZE(names)))
-		type = TC_PORT_UNKNOWN;
-
-	return names[type];
-}
-
-static void icl_update_tc_port_type(struct drm_i915_private *dev_priv,
-				    struct intel_digital_port *intel_dig_port,
-				    bool is_legacy, bool is_typec, bool is_tbt)
-{
-	enum port port = intel_dig_port->base.port;
-	enum tc_port_type old_type = intel_dig_port->tc_type;
-
-	WARN_ON(is_legacy + is_typec + is_tbt != 1);
-
-	if (is_legacy)
-		intel_dig_port->tc_type = TC_PORT_LEGACY;
-	else if (is_typec)
-		intel_dig_port->tc_type = TC_PORT_TYPEC;
-	else if (is_tbt)
-		intel_dig_port->tc_type = TC_PORT_TBT;
-	else
-		return;
-
-	/* Types are not supposed to be changed at runtime. */
-	WARN_ON(old_type != TC_PORT_UNKNOWN &&
-		old_type != intel_dig_port->tc_type);
-
-	if (old_type != intel_dig_port->tc_type)
-		DRM_DEBUG_KMS("Port %c has TC type %s\n", port_name(port),
-			      tc_type_name(intel_dig_port->tc_type));
-}
-
-/*
- * This function implements the first part of the Connect Flow described by our
- * specification, Gen11 TypeC Programming chapter. The rest of the flow (reading
- * lanes, EDID, etc) is done as needed in the typical places.
- *
- * Unlike the other ports, type-C ports are not available to use as soon as we
- * get a hotplug. The type-C PHYs can be shared between multiple controllers:
- * display, USB, etc. As a result, handshaking through FIA is required around
- * connect and disconnect to cleanly transfer ownership with the controller and
- * set the type-C power state.
- *
- * We could opt to only do the connect flow when we actually try to use the AUX
- * channels or do a modeset, then immediately run the disconnect flow after
- * usage, but there are some implications on this for a dynamic environment:
- * things may go away or change behind our backs. So for now our driver is
- * always trying to acquire ownership of the controller as soon as it gets an
- * interrupt (or polls state and sees a port is connected) and only gives it
- * back when it sees a disconnect. Implementation of a more fine-grained model
- * will require a lot of coordination with user space and thorough testing for
- * the extra possible cases.
- */
-static bool icl_tc_phy_connect(struct drm_i915_private *dev_priv,
-			       struct intel_digital_port *dig_port)
-{
-	enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port->base.port);
-	u32 val;
-
-	if (dig_port->tc_type != TC_PORT_LEGACY &&
-	    dig_port->tc_type != TC_PORT_TYPEC)
-		return true;
-
-	val = I915_READ(PORT_TX_DFLEXDPPMS);
-	if (!(val & DP_PHY_MODE_STATUS_COMPLETED(tc_port))) {
-		DRM_DEBUG_KMS("DP PHY for TC port %d not ready\n", tc_port);
-		WARN_ON(dig_port->tc_legacy_port);
-		return false;
-	}
-
-	/*
-	 * This function may be called many times in a row without an HPD event
-	 * in between, so try to avoid the write when we can.
-	 */
-	val = I915_READ(PORT_TX_DFLEXDPCSSS);
-	if (!(val & DP_PHY_MODE_STATUS_NOT_SAFE(tc_port))) {
-		val |= DP_PHY_MODE_STATUS_NOT_SAFE(tc_port);
-		I915_WRITE(PORT_TX_DFLEXDPCSSS, val);
-	}
-
-	/*
-	 * Now we have to re-check the live state, in case the port recently
-	 * became disconnected. Not necessary for legacy mode.
-	 */
-	if (dig_port->tc_type == TC_PORT_TYPEC &&
-	    !(I915_READ(PORT_TX_DFLEXDPSP) & TC_LIVE_STATE_TC(tc_port))) {
-		DRM_DEBUG_KMS("TC PHY %d sudden disconnect.\n", tc_port);
-		icl_tc_phy_disconnect(dev_priv, dig_port);
-		return false;
-	}
-
-	return true;
-}
-
-/*
- * See the comment at the connect function. This implements the Disconnect
- * Flow.
- */
-void icl_tc_phy_disconnect(struct drm_i915_private *dev_priv,
-			   struct intel_digital_port *dig_port)
-{
-	enum tc_port tc_port = intel_port_to_tc(dev_priv, dig_port->base.port);
-
-	if (dig_port->tc_type == TC_PORT_UNKNOWN)
-		return;
-
-	/*
-	 * TBT disconnection flow is read the live status, what was done in
-	 * caller.
-	 */
-	if (dig_port->tc_type == TC_PORT_TYPEC ||
-	    dig_port->tc_type == TC_PORT_LEGACY) {
-		u32 val;
-
-		val = I915_READ(PORT_TX_DFLEXDPCSSS);
-		val &= ~DP_PHY_MODE_STATUS_NOT_SAFE(tc_port);
-		I915_WRITE(PORT_TX_DFLEXDPCSSS, val);
-	}
-
-	DRM_DEBUG_KMS("Port %c TC type %s disconnected\n",
-		      port_name(dig_port->base.port),
-		      tc_type_name(dig_port->tc_type));
-
-	dig_port->tc_type = TC_PORT_UNKNOWN;
-}
-
-/*
- * The type-C ports are different because even when they are connected, they may
- * not be available/usable by the graphics driver: see the comment on
- * icl_tc_phy_connect(). So in our driver instead of adding the additional
- * concept of "usable" and make everything check for "connected and usable" we
- * define a port as "connected" when it is not only connected, but also when it
- * is usable by the rest of the driver. That maintains the old assumption that
- * connected ports are usable, and avoids exposing to the users objects they
- * can't really use.
- */
-static bool icl_tc_port_connected(struct drm_i915_private *dev_priv,
-				  struct intel_digital_port *intel_dig_port)
-{
-	enum port port = intel_dig_port->base.port;
-	enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
-	bool is_legacy, is_typec, is_tbt;
-	u32 dpsp;
-
-	/*
-	 * Complain if we got a legacy port HPD, but VBT didn't mark the port as
-	 * legacy. Treat the port as legacy from now on.
-	 */
-	if (!intel_dig_port->tc_legacy_port &&
-	    I915_READ(SDEISR) & SDE_TC_HOTPLUG_ICP(tc_port)) {
-		DRM_ERROR("VBT incorrectly claims port %c is not TypeC legacy\n",
-			  port_name(port));
-		intel_dig_port->tc_legacy_port = true;
-	}
-	is_legacy = intel_dig_port->tc_legacy_port;
-
-	/*
-	 * The spec says we shouldn't be using the ISR bits for detecting
-	 * between TC and TBT. We should use DFLEXDPSP.
-	 */
-	dpsp = I915_READ(PORT_TX_DFLEXDPSP);
-	is_typec = dpsp & TC_LIVE_STATE_TC(tc_port);
-	is_tbt = dpsp & TC_LIVE_STATE_TBT(tc_port);
-
-	if (!is_legacy && !is_typec && !is_tbt) {
-		icl_tc_phy_disconnect(dev_priv, intel_dig_port);
-
-		return false;
-	}
-
-	icl_update_tc_port_type(dev_priv, intel_dig_port, is_legacy, is_typec,
-				is_tbt);
-
-	if (!icl_tc_phy_connect(dev_priv, intel_dig_port))
-		return false;
-
-	return true;
-}
-
 static bool icl_digital_port_connected(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -5429,7 +5208,7 @@ static bool icl_digital_port_connected(struct intel_encoder *encoder)
 	if (intel_port_is_combophy(dev_priv, encoder->port))
 		return icl_combo_port_connected(dev_priv, dig_port);
 	else if (intel_port_is_tc(dev_priv, encoder->port))
-		return icl_tc_port_connected(dev_priv, dig_port);
+		return intel_tc_port_connected(dig_port);
 	else
 		MISSING_CASE(encoder->hpd_pin);
 

drivers/gpu/drm/i915/display/intel_dp.h

@@ -112,8 +112,6 @@ bool intel_dp_get_colorimetry_status(struct intel_dp *intel_dp);
 int intel_dp_link_required(int pixel_clock, int bpp);
 int intel_dp_max_data_rate(int max_link_clock, int max_lanes);
 bool intel_digital_port_connected(struct intel_encoder *encoder);
-void icl_tc_phy_disconnect(struct drm_i915_private *dev_priv,
-			   struct intel_digital_port *dig_port);
 
 static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
 {