Merge tag 'v4.5-rc6' into core/resources, to resolve conflict

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/cgroup-v2.txt

@@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and
 conventions of cgroup v2.  It describes all userland-visible aspects
 of cgroup including core and specific controller behaviors.  All
 future changes must be reflected in this document.  Documentation for
-v1 is available under Documentation/cgroup-legacy/.
+v1 is available under Documentation/cgroup-v1/.
 
 CONTENTS
 
@@ -843,6 +843,10 @@ PAGE_SIZE multiple when read back.
 		Amount of memory used to cache filesystem data,
 		including tmpfs and shared memory.
 
+	  sock
+
+		Amount of memory used in network transmission buffers
+
 	  file_mapped
 
 		Amount of cached filesystem data mapped with mmap()

Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt

@@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
 clock-output-names:
  - "xin24m" - crystal input - required,
  - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
+ - "rmii_clkin" - external EMAC clock - optional
 
 Example: Clock controller node:
 

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -24,9 +24,8 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
+  Cells 4 and beyond are reserved for future use and must have a value
+  of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
   registers, in the following order:

Documentation/devicetree/bindings/net/brcm,bcmgenet.txt

@@ -68,7 +68,7 @@ ethernet@f0b60000 {
 		phy1: ethernet-phy@1 {
 			max-speed = <1000>;
 			reg = <0x1>;
-			compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
@@ -115,7 +115,7 @@ ethernet@f0ba0000 {
 		phy0: ethernet-phy@0 {
 			max-speed = <1000>;
 			reg = <0x0>;
-			compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };

Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt

@@ -4,8 +4,6 @@ Required properties:
 - compatible: should be "hisilicon,hns-dsaf-v1" or "hisilicon,hns-dsaf-v2".
   "hisilicon,hns-dsaf-v1" is for hip05.
   "hisilicon,hns-dsaf-v2" is for Hi1610 and Hi1612.
-- dsa-name: dsa fabric name who provide this interface.
-  should be "dsafX", X is the dsaf id.
 - mode: dsa fabric mode string. only support one of dsaf modes like these:
 		"2port-64vf",
 		"6port-16rss",
@@ -26,9 +24,8 @@ Required properties:
 
 Example:
 
-dsa: dsa@c7000000 {
+dsaf0: dsa@c7000000 {
 	compatible = "hisilicon,hns-dsaf-v1";
-	dsa_name = "dsaf0";
 	mode = "6port-16rss";
 	interrupt-parent = <&mbigen_dsa>;
 	reg = <0x0 0xC0000000 0x0 0x420000

Documentation/devicetree/bindings/net/hisilicon-hns-nic.txt

@@ -4,8 +4,9 @@ Required properties:
 - compatible: "hisilicon,hns-nic-v1" or "hisilicon,hns-nic-v2".
   "hisilicon,hns-nic-v1" is for hip05.
   "hisilicon,hns-nic-v2" is for Hi1610 and Hi1612.
-- ae-name: accelerator name who provides this interface,
-  is simply a name referring to the name of name in the accelerator node.
+- ae-handle: accelerator engine handle for hns,
+  specifies a reference to the associating hardware driver node.
+  see Documentation/devicetree/bindings/net/hisilicon-hns-dsaf.txt
 - port-id: is the index of port provided by DSAF (the accelerator). DSAF can
   connect to 8 PHYs. Port 0 to 1 are both used for adminstration purpose. They
   are called debug ports.
@@ -41,7 +42,7 @@ Example:
 
 	ethernet@0{
 		compatible = "hisilicon,hns-nic-v1";
-		ae-name = "dsaf0";
+		ae-handle = <&dsaf0>;
 		port-id = <0>;
 		local-mac-address = [a2 14 e4 4b 56 76];
 	};

Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt

@@ -6,12 +6,17 @@ Required properties:
 - interrupts: interrupt for the device
 - phy: See ethernet.txt file in the same directory.
 - phy-mode: See ethernet.txt file in the same directory
-- clocks: a pointer to the reference clock for this device.
+- clocks: List of clocks for this device. At least one clock is
+  mandatory for the core clock. If several clocks are given, then the
+  clock-names property must be used to identify them.
 
 Optional properties:
 - tx-csum-limit: maximum mtu supported by port that allow TX checksum.
   Value is presented in bytes. If not used, by default 1600B is set for
   "marvell,armada-370-neta" and 9800B for others.
+- clock-names: List of names corresponding to clocks property; shall be
+  "core" for core clock and "bus" for the optional bus clock.
+
 
 Example:
 

Documentation/devicetree/bindings/net/mdio-mux-gpio.txt

@@ -38,7 +38,6 @@ Example :
 
 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -48,7 +47,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -58,7 +56,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -68,7 +65,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -85,7 +81,6 @@ Example :
 
 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -95,7 +90,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -105,7 +99,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -115,7 +108,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,

Documentation/devicetree/bindings/net/mdio-mux.txt

@@ -47,7 +47,6 @@ Example :
 
 			phy11: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -57,7 +56,6 @@ Example :
 			};
 			phy12: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -67,7 +65,6 @@ Example :
 			};
 			phy13: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -77,7 +74,6 @@ Example :
 			};
 			phy14: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -94,7 +90,6 @@ Example :
 
 			phy21: ethernet-phy@1 {
 				reg = <1>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -104,7 +99,6 @@ Example :
 			};
 			phy22: ethernet-phy@2 {
 				reg = <2>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -114,7 +108,6 @@ Example :
 			};
 			phy23: ethernet-phy@3 {
 				reg = <3>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,
@@ -124,7 +117,6 @@ Example :
 			};
 			phy24: ethernet-phy@4 {
 				reg = <4>;
-				compatible = "marvell,88e1149r";
 				marvell,reg-init = <3 0x10 0 0x5777>,
 					<3 0x11 0 0x00aa>,
 					<3 0x12 0 0x4105>,

Documentation/devicetree/bindings/net/phy.txt

@@ -17,8 +17,7 @@ Optional Properties:
   "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
   PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
   specifications. If neither of these are specified, the default is to
-  assume clause 22. The compatible list may also contain other
-  elements.
+  assume clause 22.
 
   If the phy's identifier is known then the list may contain an entry
   of the form: "ethernet-phy-idAAAA.BBBB" where
@@ -28,6 +27,9 @@ Optional Properties:
             4 hex digits. This is the chip vendor OUI bits 19:24,
             followed by 10 bits of a vendor specific ID.
 
+  The compatible list should not contain other values than those
+  listed here.
+
 - max-speed: Maximum PHY supported speed (10, 100, 1000...)
 
 - broken-turn-around: If set, indicates the PHY device does not correctly

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -82,8 +82,8 @@ Example:
 				  "ch16", "ch17", "ch18", "ch19",
 				  "ch20", "ch21", "ch22", "ch23",
 				  "ch24";
-		clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
-		power-domains = <&cpg_clocks>;
+		clocks = <&cpg CPG_MOD 812>;
+		power-domains = <&cpg>;
 		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 

Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt

@@ -8,6 +8,7 @@ OHCI and EHCI controllers.
 Required properties:
 - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
 	      "renesas,pci-r8a7791" for the R8A7791 SoC;
+	      "renesas,pci-r8a7793" for the R8A7793 SoC;
 	      "renesas,pci-r8a7794" for the R8A7794 SoC;
 	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
 

Documentation/devicetree/bindings/pci/rcar-pci.txt

@@ -4,6 +4,7 @@ Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
+	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
 

Documentation/devicetree/bindings/regulator/tps65217.txt

@@ -26,59 +26,49 @@ Example:
 		ti,pmic-shutdown-controller;
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
 			dcdc1_reg: dcdc1 {
-				reg = <0>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			dcdc2_reg: dcdc2 {
-				reg = <1>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			dcdc3_reg: dcc3 {
-				reg = <2>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo1_reg: ldo1 {
-				reg = <3>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo2_reg: ldo2 {
-				reg = <4>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo3_reg: ldo3 {
-				reg = <5>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			ldo4_reg: ldo4 {
-				reg = <6>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -14,11 +14,17 @@ Required properties:
   interrupt number is the rtc alarm interrupt and second interrupt number
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
+- clocks: Must contain a list of phandle and clock specifier for the rtc
+          and source clocks.
+- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
+               same order as the clocks property.
 
 Example:
 
 	rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <44 0 45 0>;
+		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.

Documentation/devicetree/bindings/sound/fsl-asoc-card.txt

@@ -30,6 +30,8 @@ The compatible list for this generic sound card currently:
  "fsl,imx-audio-sgtl5000"
  (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
 
+ "fsl,imx-audio-wm8960"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.