HID: i2c-hid: Remove I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk

Re-trying the power-on command on failure on all devices should
not be a problem, drop the I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk
and simply retry power-on on all devices.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>

drivers/hid/i2c-hid/i2c-hid-core.c

@@ -44,7 +44,6 @@
 #include "i2c-hid.h"
 
 /* quirks to control the device */
-#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
 #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET	BIT(1)
 #define I2C_HID_QUIRK_BOGUS_IRQ			BIT(4)
 #define I2C_HID_QUIRK_RESET_ON_RESUME		BIT(5)
@@ -120,8 +119,6 @@ static const struct i2c_hid_quirks {
 	__u16 idProduct;
 	__u32 quirks;
 } i2c_hid_quirks[] = {
-	{ USB_VENDOR_ID_WEIDA, HID_ANY_ID,
-		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
 	{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
 		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
 	{ I2C_VENDOR_ID_ITE, I2C_DEVICE_ID_ITE_VOYO_WINPAD_A15,
@@ -395,8 +392,7 @@ static int i2c_hid_set_power(struct i2c_hid *ihid, int power_state)
 	 * The call will get a return value (EREMOTEIO) but device will be
 	 * triggered and activated. After that, it goes like a normal device.
 	 */
-	if (power_state == I2C_HID_PWR_ON &&
-	    ihid->quirks & I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV) {
+	if (power_state == I2C_HID_PWR_ON) {
 		ret = i2c_hid_set_power_command(ihid, I2C_HID_PWR_ON);
 
 		/* Device was already activated */