Merge 5.14-rc3 into driver-core-next

We need the driver-core fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/arm64/tagged-address-abi.rst

@@ -45,14 +45,24 @@ how the user addresses are used by the kernel:
 
 1. User addresses not accessed by the kernel but used for address space
    management (e.g. ``mprotect()``, ``madvise()``). The use of valid
-   tagged pointers in this context is allowed with the exception of
-   ``brk()``, ``mmap()`` and the ``new_address`` argument to
-   ``mremap()`` as these have the potential to alias with existing
-   user addresses.
-
-   NOTE: This behaviour changed in v5.6 and so some earlier kernels may
-   incorrectly accept valid tagged pointers for the ``brk()``,
-   ``mmap()`` and ``mremap()`` system calls.
+   tagged pointers in this context is allowed with these exceptions:
+
+   - ``brk()``, ``mmap()`` and the ``new_address`` argument to
+     ``mremap()`` as these have the potential to alias with existing
+      user addresses.
+
+     NOTE: This behaviour changed in v5.6 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for the ``brk()``,
+     ``mmap()`` and ``mremap()`` system calls.
+
+   - The ``range.start``, ``start`` and ``dst`` arguments to the
+     ``UFFDIO_*`` ``ioctl()``s used on a file descriptor obtained from
+     ``userfaultfd()``, as fault addresses subsequently obtained by reading
+     the file descriptor will be untagged, which may otherwise confuse
+     tag-unaware programs.
+
+     NOTE: This behaviour changed in v5.14 and so some earlier kernels may
+     incorrectly accept valid tagged pointers for this system call.
 
 2. User addresses accessed by the kernel (e.g. ``write()``). This ABI
    relaxation is disabled by default and the application thread needs to

Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nxp,dwmac-imx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8 DWMAC glue layer Device Tree Bindings
+
+maintainers:
+  - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+# We need a select here so we don't match all nodes with 'snps,dwmac'
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - nxp,imx8mp-dwmac-eqos
+          - nxp,imx8dxl-dwmac-eqos
+  required:
+    - compatible
+
+allOf:
+  - $ref: "snps,dwmac.yaml#"
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - nxp,imx8mp-dwmac-eqos
+              - nxp,imx8dxl-dwmac-eqos
+          - const: snps,dwmac-5.10a
+
+  clocks:
+    minItems: 3
+    maxItems: 5
+    items:
+      - description: MAC host clock
+      - description: MAC apb clock
+      - description: MAC timer clock
+      - description: MAC RGMII TX clock
+      - description: EQOS MEM clock
+
+  clock-names:
+    minItems: 3
+    maxItems: 5
+    contains:
+      enum:
+        - stmmaceth
+        - pclk
+        - ptp_ref
+        - tx
+        - mem
+
+  intf_mode:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
+  snps,rmii_refclk_ext:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      To select RMII reference clock from external.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx8mp-clock.h>
+
+    eqos: ethernet@30bf0000 {
+            compatible = "nxp,imx8mp-dwmac-eqos","snps,dwmac-5.10a";
+            reg = <0x30bf0000 0x10000>;
+            interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq", "eth_wake_irq";
+            clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
+                     <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
+                     <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
+                     <&clk IMX8MP_CLK_ENET_QOS>;
+            clock-names = "stmmaceth", "pclk", "ptp_ref", "tx";
+            phy-mode = "rgmii";
+            status = "disabled";
+    };

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -28,6 +28,7 @@ select:
           - snps,dwmac-4.00
           - snps,dwmac-4.10a
           - snps,dwmac-4.20a
+          - snps,dwmac-5.10a
           - snps,dwxgmac
           - snps,dwxgmac-2.10
 
@@ -82,6 +83,7 @@ properties:
         - snps,dwmac-4.00
         - snps,dwmac-4.10a
         - snps,dwmac-4.20a
+        - snps,dwmac-5.10a
         - snps,dwxgmac
         - snps,dwxgmac-2.10
 
@@ -375,6 +377,7 @@ allOf:
               - snps,dwmac-4.00
               - snps,dwmac-4.10a
               - snps,dwmac-4.20a
+              - snps,dwmac-5.10a
               - snps,dwxgmac
               - snps,dwxgmac-2.10
               - st,spear600-gmac

Documentation/devicetree/bindings/regulator/fixed-regulator.yaml

@@ -57,12 +57,14 @@ properties:
     maxItems: 1
 
   power-domains:
+    deprecated: true
     description:
       Power domain to use for enable control. This binding is only
       available if the compatible is chosen to regulator-fixed-domain.
     maxItems: 1
 
   required-opps:
+    deprecated: true
     description:
       Performance state to use for enable control. This binding is only
       available if the compatible is chosen to regulator-fixed-domain. The

Documentation/devicetree/bindings/sound/renesas,rsnd.yaml

@@ -114,7 +114,7 @@ properties:
 
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
-    properties:
+    patternProperties:
       port(@[0-9a-f]+)?:
         $ref: audio-graph-port.yaml#
         unevaluatedProperties: false

Documentation/networking/af_xdp.rst

@@ -243,16 +243,16 @@ Configuration Flags and Socket Options
 These are the various configuration flags that can be used to control
 and monitor the behavior of AF_XDP sockets.
 
-XDP_COPY and XDP_ZERO_COPY bind flags
--------------------------------------
+XDP_COPY and XDP_ZEROCOPY bind flags
+------------------------------------
 
 When you bind to a socket, the kernel will first try to use zero-copy
 copy. If zero-copy is not supported, it will fall back on using copy
 mode, i.e. copying all packets out to user space. But if you would
 like to force a certain mode, you can use the following flags. If you
 pass the XDP_COPY flag to the bind call, the kernel will force the
 socket into copy mode. If it cannot use copy mode, the bind call will
-fail with an error. Conversely, the XDP_ZERO_COPY flag will force the
+fail with an error. Conversely, the XDP_ZEROCOPY flag will force the
 socket into zero-copy mode or fail.
 
 XDP_SHARED_UMEM bind flag

Documentation/networking/ip-sysctl.rst

@@ -826,7 +826,7 @@ tcp_fastopen_blackhole_timeout_sec - INTEGER
 	initial value when the blackhole issue goes away.
 	0 to disable the blackhole detection.
 
-	By default, it is set to 1hr.
+	By default, it is set to 0 (feature is disabled).
 
 tcp_fastopen_key - list of comma separated 32-digit hexadecimal INTEGERs
 	The list consists of a primary key and an optional backup key. The

Documentation/trace/histogram.rst

@@ -191,7 +191,7 @@ Documentation written by Tom Zanussi
                                 with the event, in nanoseconds.  May be
 			        modified by .usecs to have timestamps
 			        interpreted as microseconds.
-    cpu                    int  the cpu on which the event occurred.
+    common_cpu             int  the cpu on which the event occurred.
     ====================== ==== =======================================
 
 Extended error information

MAINTAINERS

@@ -445,7 +445,7 @@ F:	drivers/platform/x86/wmi.c
 F:	include/uapi/linux/wmi.h
 
 ACRN HYPERVISOR SERVICE MODULE
-M:	Shuo Liu <shuo.a.liu@intel.com>
+M:	Fei Li <fei1.li@intel.com>
 L:	acrn-dev@lists.projectacrn.org (subscribers-only)
 S:	Supported
 W:	https://projectacrn.org
@@ -11758,6 +11758,7 @@ F:	drivers/char/hw_random/mtk-rng.c
 MEDIATEK SWITCH DRIVER
 M:	Sean Wang <sean.wang@mediatek.com>
 M:	Landen Chao <Landen.Chao@mediatek.com>
+M:	DENG Qingfang <dqfext@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/dsa/mt7530.*
@@ -19122,7 +19123,7 @@ M:	Mauro Carvalho Chehab <mchehab@kernel.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/phy/hisilicon,hi3670-usb3.yaml
-F:	drivers/phy/hisilicon/phy-kirin970-usb3.c
+F:	drivers/phy/hisilicon/phy-hi3670-usb3.c
 
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
@@ -19800,6 +19801,14 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/ptp/ptp_vmw.c
 
+VMWARE VMCI DRIVER
+M:	Jorgen Hansen <jhansen@vmware.com>
+M:	Vishnu Dasa <vdasa@vmware.com>
+L:	linux-kernel@vger.kernel.org
+L:	pv-drivers@vmware.com (private)
+S:	Maintained
+F:	drivers/misc/vmw_vmci/
+
 VMWARE VMMOUSE SUBDRIVER
 M:	"VMware Graphics" <linux-graphics-maintainer@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Opossums on Parade
 
 # *DOCUMENTATION*

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -821,9 +821,9 @@
 			eqos: ethernet@30bf0000 {
 				compatible = "nxp,imx8mp-dwmac-eqos", "snps,dwmac-5.10a";
 				reg = <0x30bf0000 0x10000>;
-				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "eth_wake_irq", "macirq";
+				interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
 				clocks = <&clk IMX8MP_CLK_ENET_QOS_ROOT>,
 					 <&clk IMX8MP_CLK_QOS_ENET_ROOT>,
 					 <&clk IMX8MP_CLK_ENET_QOS_TIMER>,

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi

@@ -1063,7 +1063,7 @@
 	status = "okay";
 	extcon = <&usb2_id>;
 
-	usb@7600000 {
+	dwc3@7600000 {
 		extcon = <&usb2_id>;
 		dr_mode = "otg";
 		maximum-speed = "high-speed";
@@ -1074,7 +1074,7 @@
 	status = "okay";
 	extcon = <&usb3_id>;
 
-	usb@6a00000 {
+	dwc3@6a00000 {
 		extcon = <&usb3_id>;
 		dr_mode = "otg";
 	};

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -443,7 +443,7 @@
 			resets = <&gcc GCC_USB0_BCR>;
 			status = "disabled";
 
-			dwc_0: usb@8a00000 {
+			dwc_0: dwc3@8a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8a00000 0xcd00>;
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
@@ -484,7 +484,7 @@
 			resets = <&gcc GCC_USB1_BCR>;
 			status = "disabled";
 
-			dwc_1: usb@8c00000 {
+			dwc_1: dwc3@8c00000 {
 				compatible = "snps,dwc3";
 				reg = <0x8c00000 0xcd00>;
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -2566,7 +2566,7 @@
 			power-domains = <&gcc USB30_GDSC>;
 			status = "disabled";
 
-			usb@6a00000 {
+			dwc3@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x06a00000 0xcc00>;
 				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
@@ -2873,7 +2873,7 @@
 			qcom,select-utmi-as-pipe-clk;
 			status = "disabled";
 
-			usb@7600000 {
+			dwc3@7600000 {
 				compatible = "snps,dwc3";
 				reg = <0x07600000 0xcc00>;
 				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;

arch/arm64/boot/dts/qcom/msm8998.dtsi

@@ -1964,7 +1964,7 @@
 
 			resets = <&gcc GCC_USB_30_BCR>;
 
-			usb3_dwc3: usb@a800000 {
+			usb3_dwc3: dwc3@a800000 {
 				compatible = "snps,dwc3";
 				reg = <0x0a800000 0xcd00>;
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;