Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pu…

…b/scm/linux/kernel/git/daeinki/drm-exynos into exynos-drm-next

Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
- it corrects chroma_addr[1], height and vertical position values.
And trivial cleanup
- it just removes duplicated drm_bridge_attach.

Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt

@@ -21,7 +21,7 @@ Required properties:
 - interrupts : identifier to the device interrupt
 - clocks : a list of phandle + clock-specifier pairs, one for each
 	   entry in clock names.
-- clocks-names :
+- clock-names :
    * "xtal" for external xtal clock identifier
    * "pclk" for the bus core clock, either the clk81 clock or the gate clock
    * "baud" for the source of the baudrate generator, can be either the xtal

Documentation/devicetree/bindings/serial/mvebu-uart.txt

@@ -24,7 +24,7 @@ Required properties:
     - Must contain two elements for the extended variant of the IP
       (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx",
       respectively the UART TX interrupt and the UART RX interrupt. A
-      corresponding interrupts-names property must be defined.
+      corresponding interrupt-names property must be defined.
     - For backward compatibility reasons, a single element interrupts
       property is also supported for the standard variant of the IP,
       containing only the UART sum interrupt. This form is deprecated

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -17,6 +17,8 @@ Required properties:
     - "renesas,scifa-r8a7745" for R8A7745 (RZ/G1E) SCIFA compatible UART.
     - "renesas,scifb-r8a7745" for R8A7745 (RZ/G1E) SCIFB compatible UART.
     - "renesas,hscif-r8a7745" for R8A7745 (RZ/G1E) HSCIF compatible UART.
+    - "renesas,scif-r8a77470" for R8A77470 (RZ/G1C) SCIF compatible UART.
+    - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
     - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.
     - "renesas,scif-r8a7779" for R8A7779 (R-Car H1) SCIF compatible UART.
     - "renesas,scif-r8a7790" for R8A7790 (R-Car H2) SCIF compatible UART.

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -28,7 +28,10 @@ Required properties:
   - interrupts: one XHCI interrupt should be described here.
 
 Optional properties:
-  - clocks: reference to a clock
+  - clocks: reference to the clocks
+  - clock-names: mandatory if there is a second clock, in this case
+    the name must be "core" for the first clock and "reg" for the
+    second one
   - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism

Documentation/driver-api/firmware/request_firmware.rst

@@ -17,17 +17,17 @@ an error is returned.
 
 request_firmware
 ----------------
-.. kernel-doc:: drivers/base/firmware_class.c
+.. kernel-doc:: drivers/base/firmware_loader/main.c
    :functions: request_firmware
 
 request_firmware_direct
 -----------------------
-.. kernel-doc:: drivers/base/firmware_class.c
+.. kernel-doc:: drivers/base/firmware_loader/main.c
    :functions: request_firmware_direct
 
 request_firmware_into_buf
 -------------------------
-.. kernel-doc:: drivers/base/firmware_class.c
+.. kernel-doc:: drivers/base/firmware_loader/main.c
    :functions: request_firmware_into_buf
 
 Asynchronous firmware requests
@@ -41,7 +41,7 @@ in atomic contexts.
 
 request_firmware_nowait
 -----------------------
-.. kernel-doc:: drivers/base/firmware_class.c
+.. kernel-doc:: drivers/base/firmware_loader/main.c
    :functions: request_firmware_nowait
 
 Special optimizations on reboot
@@ -50,12 +50,12 @@ Special optimizations on reboot
 Some devices have an optimization in place to enable the firmware to be
 retained during system reboot. When such optimizations are used the driver
 author must ensure the firmware is still available on resume from suspend,
-this can be done with firmware_request_cache() insted of requesting for the
-firmare to be loaded.
+this can be done with firmware_request_cache() instead of requesting for the
+firmware to be loaded.
 
 firmware_request_cache()
------------------------
-.. kernel-doc:: drivers/base/firmware_class.c
+------------------------
+.. kernel-doc:: drivers/base/firmware_loader/main.c
    :functions: firmware_request_cache
 
 request firmware API expected driver use

Documentation/driver-api/infrastructure.rst

@@ -28,7 +28,7 @@ Device Drivers Base
 .. kernel-doc:: drivers/base/node.c
    :internal:
 
-.. kernel-doc:: drivers/base/firmware_class.c
+.. kernel-doc:: drivers/base/firmware_loader/main.c
    :export:
 
 .. kernel-doc:: drivers/base/transport_class.c

Documentation/driver-api/usb/typec.rst

@@ -210,7 +210,7 @@ If the connector is dual-role capable, there may also be a switch for the data
 role. USB Type-C Connector Class does not supply separate API for them. The
 port drivers can use USB Role Class API with those.
 
-Illustration of the muxes behind a connector that supports an alternate mode:
+Illustration of the muxes behind a connector that supports an alternate mode::
 
                      ------------------------
                      |       Connector      |

Documentation/i2c/dev-interface

@@ -9,8 +9,8 @@ i2c adapters present on your system at a given time. i2cdetect is part of
 the i2c-tools package.
 
 I2C device files are character device files with major device number 89
-and a minor device number corresponding to the number assigned as 
-explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ..., 
+and a minor device number corresponding to the number assigned as
+explained above. They should be called "i2c-%d" (i2c-0, i2c-1, ...,
 i2c-10, ...). All 256 minor device numbers are reserved for i2c.
 
 
@@ -23,11 +23,6 @@ First, you need to include these two headers:
   #include <linux/i2c-dev.h>
   #include <i2c/smbus.h>
 
-(Please note that there are two files named "i2c-dev.h" out there. One is
-distributed with the Linux kernel and the other one is included in the
-source tree of i2c-tools. They used to be different in content but since 2012
-they're identical. You should use "linux/i2c-dev.h").
-
 Now, you have to decide which adapter you want to access. You should
 inspect /sys/class/i2c-dev/ or run "i2cdetect -l" to decide this.
 Adapter numbers are assigned somewhat dynamically, so you can not
@@ -38,7 +33,7 @@ Next thing, open the device file, as follows:
   int file;
   int adapter_nr = 2; /* probably dynamically determined */
   char filename[20];
-  
+
   snprintf(filename, 19, "/dev/i2c-%d", adapter_nr);
   file = open(filename, O_RDWR);
   if (file < 0) {
@@ -72,8 +67,10 @@ the device supports them. Both are illustrated below.
     /* res contains the read word */
   }
 
-  /* Using I2C Write, equivalent of 
-     i2c_smbus_write_word_data(file, reg, 0x6543) */
+  /*
+   * Using I2C Write, equivalent of
+   * i2c_smbus_write_word_data(file, reg, 0x6543)
+   */
   buf[0] = reg;
   buf[1] = 0x43;
   buf[2] = 0x65;
@@ -140,14 +137,14 @@ ioctl(file, I2C_RDWR, struct i2c_rdwr_ioctl_data *msgset)
   set in each message, overriding the values set with the above ioctl's.
 
 ioctl(file, I2C_SMBUS, struct i2c_smbus_ioctl_data *args)
-  Not meant to be called  directly; instead, use the access functions
-  below.
+  If possible, use the provided i2c_smbus_* methods described below instead
+  of issuing direct ioctls.
 
 You can do plain i2c transactions by using read(2) and write(2) calls.
 You do not need to pass the address byte; instead, set it through
 ioctl I2C_SLAVE before you try to access the device.
 
-You can do SMBus level transactions (see documentation file smbus-protocol 
+You can do SMBus level transactions (see documentation file smbus-protocol
 for details) through the following functions:
   __s32 i2c_smbus_write_quick(int file, __u8 value);
   __s32 i2c_smbus_read_byte(int file);
@@ -158,18 +155,17 @@ for details) through the following functions:
   __s32 i2c_smbus_write_word_data(int file, __u8 command, __u16 value);
   __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value);
   __s32 i2c_smbus_read_block_data(int file, __u8 command, __u8 *values);
-  __s32 i2c_smbus_write_block_data(int file, __u8 command, __u8 length, 
+  __s32 i2c_smbus_write_block_data(int file, __u8 command, __u8 length,
                                    __u8 *values);
 All these transactions return -1 on failure; you can read errno to see
 what happened. The 'write' transactions return 0 on success; the
 'read' transactions return the read value, except for read_block, which
 returns the number of values read. The block buffers need not be longer
 than 32 bytes.
 
-The above functions are all inline functions, that resolve to calls to
-the i2c_smbus_access function, that on its turn calls a specific ioctl
-with the data in a specific format. Read the source code if you
-want to know what happens behind the screens.
+The above functions are made available by linking against the libi2c library,
+which is provided by the i2c-tools project.  See:
+https://git.kernel.org/pub/scm/utils/i2c-tools/i2c-tools.git/.
 
 
 Implementation details

Documentation/ioctl/ioctl-number.txt

@@ -217,7 +217,6 @@ Code  Seq#(hex)	Include File		Comments
 'd'	02-40	pcmcia/ds.h		conflict!
 'd'	F0-FF	linux/digi1.h
 'e'	all	linux/digi1.h		conflict!
-'e'	00-1F	drivers/net/irda/irtty-sir.h	conflict!
 'f'	00-1F	linux/ext2_fs.h		conflict!
 'f'	00-1F	linux/ext3_fs.h		conflict!
 'f'	00-0F	fs/jfs/jfs_dinode.h	conflict!
@@ -247,7 +246,6 @@ Code  Seq#(hex)	Include File		Comments
 'm'	all	linux/synclink.h	conflict!
 'm'	00-19	drivers/message/fusion/mptctl.h	conflict!
 'm'	00	drivers/scsi/megaraid/megaraid_ioctl.h	conflict!
-'m'	00-1F	net/irda/irmod.h	conflict!
 'n'	00-7F	linux/ncp_fs.h and fs/ncpfs/ioctl.c
 'n'	80-8F	uapi/linux/nilfs2_api.h	NILFS2
 'n'	E0-FF	linux/matroxfb.h	matroxfb

Documentation/networking/ip-sysctl.txt

@@ -2126,18 +2126,3 @@ max_dgram_qlen - INTEGER
 
 	Default: 10
 
-
-UNDOCUMENTED:
-
-/proc/sys/net/irda/*
-	fast_poll_increase FIXME
-	warn_noreply_time FIXME
-	discovery_slots FIXME
-	slot_timeout FIXME
-	max_baud_rate FIXME
-	discovery_timeout FIXME
-	lap_keepalive_time FIXME
-	max_noreply_time FIXME
-	max_tx_data_size FIXME
-	max_tx_window FIXME
-	min_tx_turn_time FIXME

Documentation/power/suspend-and-cpuhotplug.txt

@@ -168,7 +168,7 @@ update on the CPUs, as discussed below:
 
 [Please bear in mind that the kernel requests the microcode images from
 userspace, using the request_firmware() function defined in
-drivers/base/firmware_class.c]
+drivers/base/firmware_loader/main.c]
 
 
 a. When all the CPUs are identical:

Documentation/process/magic-number.rst

@@ -157,8 +157,5 @@ memory management. See ``include/sound/sndmagic.h`` for complete list of them. M
 OSS sound drivers have their magic numbers constructed from the soundcard PCI
 ID - these are not listed here as well.
 
-IrDA subsystem also uses large number of own magic numbers, see
-``include/net/irda/irda.h`` for a complete list of them.
-
 HFS is another larger user of magic numbers - you can find them in
 ``fs/hfs/hfs.h``.

Documentation/trace/ftrace.rst

@@ -461,9 +461,17 @@ of ftrace. Here is a list of some of the key files:
 		and ticks at the same rate as the hardware clocksource.
 
 	boot:
-		Same as mono. Used to be a separate clock which accounted
-		for the time spent in suspend while CLOCK_MONOTONIC did
-		not.
+		This is the boot clock (CLOCK_BOOTTIME) and is based on the
+		fast monotonic clock, but also accounts for time spent in
+		suspend. Since the clock access is designed for use in
+		tracing in the suspend path, some side effects are possible
+		if clock is accessed after the suspend time is accounted before
+		the fast mono clock is updated. In this case, the clock update
+		appears to happen slightly sooner than it normally would have.
+		Also on 32-bit systems, it's possible that the 64-bit boot offset
+		sees a partial update. These effects are rare and post
+		processing should be able to handle them. See comments in the
+		ktime_get_boot_fast_ns() function for more information.
 
 	To set a clock, simply echo the clock name into this file::
 

Documentation/virtual/kvm/api.txt

@@ -1960,6 +1960,9 @@ ARM 32-bit VFP control registers have the following id bit patterns:
 ARM 64-bit FP registers have the following id bit patterns:
   0x4030 0000 0012 0 <regno:12>
 
+ARM firmware pseudo-registers have the following bit pattern:
+  0x4030 0000 0014 <regno:16>
+
 
 arm64 registers are mapped using the lower 32 bits. The upper 16 of
 that is the register group type, or coprocessor number:
@@ -1976,6 +1979,9 @@ arm64 CCSIDR registers are demultiplexed by CSSELR value:
 arm64 system registers have the following id bit patterns:
   0x6030 0000 0013 <op0:2> <op1:3> <crn:4> <crm:4> <op2:3>
 
+arm64 firmware pseudo-registers have the following bit pattern:
+  0x6030 0000 0014 <regno:16>
+
 
 MIPS registers are mapped using the lower 32 bits.  The upper 16 of that is
 the register group type:
@@ -2510,7 +2516,8 @@ Possible features:
 	  and execute guest code when KVM_RUN is called.
 	- KVM_ARM_VCPU_EL1_32BIT: Starts the CPU in a 32bit mode.
 	  Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
-	- KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
+	- KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 (or a future revision
+          backward compatible with v0.2) for the CPU.
 	  Depends on KVM_CAP_ARM_PSCI_0_2.
 	- KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
 	  Depends on KVM_CAP_ARM_PMU_V3.

Documentation/virtual/kvm/arm/psci.txt

@@ -0,0 +1,30 @@
+KVM implements the PSCI (Power State Coordination Interface)
+specification in order to provide services such as CPU on/off, reset
+and power-off to the guest.
+
+The PSCI specification is regularly updated to provide new features,
+and KVM implements these updates if they make sense from a virtualization
+point of view.
+
+This means that a guest booted on two different versions of KVM can
+observe two different "firmware" revisions. This could cause issues if
+a given guest is tied to a particular PSCI revision (unlikely), or if
+a migration causes a different PSCI version to be exposed out of the
+blue to an unsuspecting guest.
+
+In order to remedy this situation, KVM exposes a set of "firmware
+pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
+interface. These registers can be saved/restored by userspace, and set
+to a convenient value if required.
+
+The following register is defined:
+
+* KVM_REG_ARM_PSCI_VERSION:
+
+  - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
+    (and thus has already been initialized)
+  - Returns the current PSCI version on GET_ONE_REG (defaulting to the
+    highest PSCI version implemented by KVM and compatible with v0.2)
+  - Allows any PSCI version implemented by KVM and compatible with
+    v0.2 to be set with SET_ONE_REG
+  - Affects the whole VM (even if the register view is per-vcpu)