Merge branches 'pci/host-designware', 'pci/host-designware-common', '…

…pci/host-generic', 'pci/host-imx6', 'pci/host-iproc' and 'pci/host-xgene' into next

* pci/host-designware:
  PCI: designware: Use iATU0 for cfg and IO, iATU1 for MEM
  PCI: designware: Consolidate outbound iATU programming functions
  PCI: designware: Add support for x8 links

* pci/host-designware-common:
  PCI: designware: Wait for link to come up with consistent style
  PCI: layerscape: Factor out ls_pcie_establish_link()
  PCI: layerscape: Use dw_pcie_link_up() consistently
  PCI: dra7xx: Use dw_pcie_link_up() consistently
  PCI: imx6: Rename imx6_pcie_start_link() to imx6_pcie_establish_link()

* pci/host-generic:
  of/pci: Fix pci_address_to_pio() conversion of CPU address to I/O port

* pci/host-imx6:
  PCI: imx6: Add #define PCIE_RC_LCSR
  PCI: imx6: Use "u32", not "uint32_t"
  PCI: imx6: Add speed change timeout message

* pci/host-iproc:
  PCI: iproc: Free resource list after registration
  PCI: iproc: Directly add PCI resources
  PCI: iproc: Add BCMA PCIe driver
  PCI: iproc: Allow override of device tree IRQ mapping function

* pci/host-xgene:
  arm64: dts: Add APM X-Gene PCIe MSI nodes
  PCI: xgene: Add APM X-Gene v1 PCIe MSI/MSIX termination driver

Documentation/devicetree/bindings/pci/xgene-pci-msi.txt

@@ -0,0 +1,68 @@
+* AppliedMicro X-Gene v1 PCIe MSI controller
+
+Required properties:
+
+- compatible: should be "apm,xgene1-msi" to identify
+	      X-Gene v1 PCIe MSI controller block.
+- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node
+- reg: physical base address (0x79000000) and length (0x900000) for controller
+       registers. These registers include the MSI termination address and data
+       registers as well as the MSI interrupt status registers.
+- reg-names: not required
+- interrupts: A list of 16 interrupt outputs of the controller, starting from
+	      interrupt number 0x10 to 0x1f.
+- interrupt-names: not required
+
+Each PCIe node needs to have property msi-parent that points to msi controller node
+
+Examples:
+
+SoC DTSI:
+
+	+ MSI node:
+	msi@79000000 {
+		compatible = "apm,xgene1-msi";
+		msi-controller;
+		reg = <0x00 0x79000000 0x0 0x900000>;
+		interrupts = 	<0x0 0x10 0x4>
+				<0x0 0x11 0x4>
+				<0x0 0x12 0x4>
+				<0x0 0x13 0x4>
+				<0x0 0x14 0x4>
+				<0x0 0x15 0x4>
+				<0x0 0x16 0x4>
+				<0x0 0x17 0x4>
+				<0x0 0x18 0x4>
+				<0x0 0x19 0x4>
+				<0x0 0x1a 0x4>
+				<0x0 0x1b 0x4>
+				<0x0 0x1c 0x4>
+				<0x0 0x1d 0x4>
+				<0x0 0x1e 0x4>
+				<0x0 0x1f 0x4>;
+	};
+
+	+ PCIe controller node with msi-parent property pointing to MSI node:
+	pcie0: pcie@1f2b0000 {
+		status = "disabled";
+		device_type = "pci";
+		compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = < 0x00 0x1f2b0000 0x0 0x00010000   /* Controller registers */
+			0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+		reg-names = "csr", "cfg";
+		ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000   /* io */
+			  0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+		dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+			      0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+		interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+		interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+				 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+				 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+				 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+		dma-coherent;
+		clocks = <&pcie0clk 0>;
+		msi-parent= <&msi>;
+	};

MAINTAINERS

@@ -7564,6 +7564,14 @@ L:	linux-pci@vger.kernel.org
 S:	Orphan
 F:	drivers/pci/host/*spear*
 
+PCI MSI DRIVER FOR APPLIEDMICRO XGENE
+M:	Duc Dang <dhdang@apm.com>
+L:	linux-pci@vger.kernel.org
+L:	linux-arm-kernel@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
+F:	drivers/pci/host/pci-xgene-msi.c
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia@lists.infradead.org

arch/arm64/boot/dts/apm/apm-storm.dtsi

@@ -374,6 +374,28 @@
 			};
 		};
 
+		msi: msi@79000000 {
+			compatible = "apm,xgene1-msi";
+			msi-controller;
+			reg = <0x00 0x79000000 0x0 0x900000>;
+			interrupts = <  0x0 0x10 0x4
+					0x0 0x11 0x4
+					0x0 0x12 0x4
+					0x0 0x13 0x4
+					0x0 0x14 0x4
+					0x0 0x15 0x4
+					0x0 0x16 0x4
+					0x0 0x17 0x4
+					0x0 0x18 0x4
+					0x0 0x19 0x4
+					0x0 0x1a 0x4
+					0x0 0x1b 0x4
+					0x0 0x1c 0x4
+					0x0 0x1d 0x4
+					0x0 0x1e 0x4
+					0x0 0x1f 0x4>;
+		};
+
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
@@ -395,6 +417,7 @@
 					 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
 			dma-coherent;
 			clocks = <&pcie0clk 0>;
+			msi-parent = <&msi>;
 		};
 
 		pcie1: pcie@1f2c0000 {
@@ -418,6 +441,7 @@
 					 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
 			dma-coherent;
 			clocks = <&pcie1clk 0>;
+			msi-parent = <&msi>;
 		};
 
 		pcie2: pcie@1f2d0000 {
@@ -441,6 +465,7 @@
 					 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
 			dma-coherent;
 			clocks = <&pcie2clk 0>;
+			msi-parent = <&msi>;
 		};
 
 		pcie3: pcie@1f500000 {
@@ -464,6 +489,7 @@
 					 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
 			dma-coherent;
 			clocks = <&pcie3clk 0>;
+			msi-parent = <&msi>;
 		};
 
 		pcie4: pcie@1f510000 {
@@ -487,6 +513,7 @@
 					 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
 			dma-coherent;
 			clocks = <&pcie4clk 0>;
+			msi-parent = <&msi>;
 		};
 
 		serial0: serial@1c020000 {

drivers/of/address.c

@@ -765,7 +765,7 @@ unsigned long __weak pci_address_to_pio(phys_addr_t address)
 	spin_lock(&io_range_lock);
 	list_for_each_entry(res, &io_range_list, list) {
 		if (address >= res->start && address < res->start + res->size) {
-			addr = res->start - address + offset;
+			addr = address - res->start + offset;
 			break;
 		}
 		offset += res->size;

drivers/pci/host/Kconfig

@@ -89,11 +89,20 @@ config PCI_XGENE
 	depends on ARCH_XGENE
 	depends on OF
 	select PCIEPORTBUS
+	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
 	help
 	  Say Y here if you want internal PCI support on APM X-Gene SoC.
 	  There are 5 internal PCIe ports available. Each port is GEN3 capable
 	  and have varied lanes from x1 to x8.
 
+config PCI_XGENE_MSI
+	bool "X-Gene v1 PCIe MSI feature"
+	depends on PCI_XGENE && PCI_MSI
+	default y
+	help
+	  Say Y here if you want PCIe MSI support for the APM X-Gene v1 SoC.
+	  This MSI driver supports 5 PCIe ports on the APM X-Gene v1 SoC.
+
 config PCI_LAYERSCAPE
 	bool "Freescale Layerscape PCIe controller"
 	depends on OF && ARM
@@ -125,4 +134,15 @@ config PCIE_IPROC_PLATFORM
 	  Say Y here if you want to use the Broadcom iProc PCIe controller
 	  through the generic platform bus interface
 
+config PCIE_IPROC_BCMA
+	bool "Broadcom iProc PCIe BCMA bus driver"
+	depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
+	select PCIE_IPROC
+	select BCMA
+	select PCI_DOMAINS
+	default ARCH_BCM_5301X
+	help
+	  Say Y here if you want to use the Broadcom iProc PCIe controller
+	  through the BCMA bus interface
+
 endmenu

drivers/pci/host/Makefile

@@ -11,7 +11,9 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
 obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
 obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
+obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
 obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
 obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
+obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o

drivers/pci/host/pci-dra7xx.c

@@ -93,9 +93,9 @@ static int dra7xx_pcie_link_up(struct pcie_port *pp)
 
 static int dra7xx_pcie_establish_link(struct pcie_port *pp)
 {
-	u32 reg;
-	unsigned int retries = 1000;
 	struct dra7xx_pcie *dra7xx = to_dra7xx_pcie(pp);
+	u32 reg;
+	unsigned int retries;
 
 	if (dw_pcie_link_up(pp)) {
 		dev_err(pp->dev, "link is already up\n");
@@ -106,19 +106,14 @@ static int dra7xx_pcie_establish_link(struct pcie_port *pp)
 	reg |= LTSSM_EN;
 	dra7xx_pcie_writel(dra7xx, PCIECTRL_DRA7XX_CONF_DEVICE_CMD, reg);
 
-	while (retries--) {
-		reg = dra7xx_pcie_readl(dra7xx,	PCIECTRL_DRA7XX_CONF_PHY_CS);
-		if (reg & LINK_UP)
-			break;
+	for (retries = 0; retries < 1000; retries++) {
+		if (dw_pcie_link_up(pp))
+			return 0;
 		usleep_range(10, 20);
 	}
 
-	if (retries == 0) {
-		dev_err(pp->dev, "link is not up\n");
-		return -ETIMEDOUT;
-	}
-
-	return 0;
+	dev_err(pp->dev, "link is not up\n");
+	return -EINVAL;
 }
 
 static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)

drivers/pci/host/pci-exynos.c

@@ -316,9 +316,9 @@ static void exynos_pcie_assert_reset(struct pcie_port *pp)
 
 static int exynos_pcie_establish_link(struct pcie_port *pp)
 {
-	u32 val;
-	int count = 0;
 	struct exynos_pcie *exynos_pcie = to_exynos_pcie(pp);
+	u32 val;
+	unsigned int retries;
 
 	if (dw_pcie_link_up(pp)) {
 		dev_err(pp->dev, "Link already up\n");
@@ -357,27 +357,23 @@ static int exynos_pcie_establish_link(struct pcie_port *pp)
 			  PCIE_APP_LTSSM_ENABLE);
 
 	/* check if the link is up or not */
-	while (!dw_pcie_link_up(pp)) {
-		mdelay(100);
-		count++;
-		if (count == 10) {
-			while (exynos_phy_readl(exynos_pcie,
-						PCIE_PHY_PLL_LOCKED) == 0) {
-				val = exynos_blk_readl(exynos_pcie,
-						       PCIE_PHY_PLL_LOCKED);
-				dev_info(pp->dev, "PLL Locked: 0x%x\n", val);
-			}
-			/* power off phy */
-			exynos_pcie_power_off_phy(pp);
-
-			dev_err(pp->dev, "PCIe Link Fail\n");
-			return -EINVAL;
+	for (retries = 0; retries < 10; retries++) {
+		if (dw_pcie_link_up(pp)) {
+			dev_info(pp->dev, "Link up\n");
+			return 0;
 		}
+		mdelay(100);
 	}
 
-	dev_info(pp->dev, "Link up\n");
+	while (exynos_phy_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED) == 0) {
+		val = exynos_blk_readl(exynos_pcie, PCIE_PHY_PLL_LOCKED);
+		dev_info(pp->dev, "PLL Locked: 0x%x\n", val);
+	}
+	/* power off phy */
+	exynos_pcie_power_off_phy(pp);
 
-	return 0;
+	dev_err(pp->dev, "PCIe Link Fail\n");
+	return -EINVAL;
 }
 
 static void exynos_pcie_clear_irq_pulse(struct pcie_port *pp)