Merge branch 'merge'

Documentation/dvb/get_dvb_firmware

@@ -259,18 +259,18 @@ sub dibusb {
 }
 
 sub nxt2002 {
-    my $sourcefile = "Broadband4PC_4_2_11.zip";
+    my $sourcefile = "Technisat_DVB-PC_4_4_COMPACT.zip";
     my $url = "http://www.bbti.us/download/windows/$sourcefile";
-    my $hash = "c6d2ea47a8f456d887ada0cfb718ff2a";
+    my $hash = "476befae8c7c1bb9648954060b1eec1f";
     my $outfile = "dvb-fe-nxt2002.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
     checkstandard();
 
     wgetfile($sourcefile, $url);
     unzip($sourcefile, $tmpdir);
-    verify("$tmpdir/SkyNETU.sys", $hash);
-    extract("$tmpdir/SkyNETU.sys", 375832, 5908, $outfile);
+    verify("$tmpdir/SkyNET.sys", $hash);
+    extract("$tmpdir/SkyNET.sys", 331624, 5908, $outfile);
 
     $outfile;
 }

Documentation/firmware_class/README

@@ -105,20 +105,3 @@
    on the setup, so I think that the choice on what firmware to make
    persistent should be left to userspace.
 
- - Why register_firmware()+__init can be useful:
- 	- For boot devices needing firmware.
-	- To make the transition easier:
-		The firmware can be declared __init and register_firmware()
-		called on module_init. Then the firmware is warranted to be
-		there even if "firmware hotplug userspace" is not there yet or
-		it doesn't yet provide the needed firmware.
-		Once the firmware is widely available in userspace, it can be
-		removed from the kernel. Or made optional (CONFIG_.*_FIRMWARE).
-
-	In either case, if firmware hotplug support is there, it can move the
-	firmware out of kernel memory into the real filesystem for later
-	usage.
-
-	Note: If persistence is implemented on top of initramfs,
-	register_firmware() may not be appropriate.
-

Documentation/firmware_class/firmware_sample_driver.c

@@ -5,8 +5,6 @@
  *
  * Sample code on how to use request_firmware() from drivers.
  *
- * Note that register_firmware() is currently useless.
- *
  */
 
 #include <linux/module.h>
@@ -17,11 +15,6 @@
 
 #include "linux/firmware.h"
 
-#define WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-char __init inkernel_firmware[] = "let's say that this is firmware\n";
-#endif
-
 static struct device ghost_device = {
 	.bus_id    = "ghost0",
 };
@@ -104,10 +97,6 @@ static void sample_probe_async(void)
 
 static int sample_init(void)
 {
-#ifdef WE_CAN_NEED_FIRMWARE_BEFORE_USERSPACE_IS_AVAILABLE
-	register_firmware("sample_driver_fw", inkernel_firmware,
-			  sizeof(inkernel_firmware));
-#endif
 	device_initialize(&ghost_device);
 	/* since there is no real hardware insertion I just call the
 	 * sample probe functions here */

Documentation/watchdog/watchdog-api.txt

@@ -36,6 +36,9 @@ timeout or margin.  The simplest way to ping the watchdog is to write
 some data to the device.  So a very simple watchdog daemon would look
 like this:
 
+#include <stdlib.h>
+#include <fcntl.h>
+
 int main(int argc, const char *argv[]) {
 	int fd=open("/dev/watchdog",O_WRONLY);
 	if (fd==-1) {

MAINTAINERS

@@ -40,11 +40,20 @@ trivial patch so apply some common sense.
 	PLEASE document known bugs. If it doesn't work for everything
 	or does something very odd once a month document it.
 
+	PLEASE remember that submissions must be made under the terms
+	of the OSDL certificate of contribution
+	(http://www.osdl.org/newsroom/press_releases/2004/2004_05_24_dco.html)
+	and should include a Signed-off-by: line.
+
 6.	Make sure you have the right to send any changes you make. If you
 	do changes at work you may find your employer owns the patch
 	not you.
 
-7.	Happy hacking.
+7.	When sending security related changes or reports to a maintainer
+	please Cc: security@kernel.org, especially if the maintainer
+	does not respond.
+
+8.	Happy hacking.
 
  		-----------------------------------
 
@@ -556,7 +565,7 @@ BROADBAND PROCESSOR ARCHITECTURE
 P:	Arnd Bergmann
 M:	arnd@arndb.de
 L:	linuxppc-dev@ozlabs.org
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
 S:	Supported
 
 BTTV VIDEO4LINUX DRIVER
@@ -969,7 +978,7 @@ S:	Maintained
 EXT3 FILE SYSTEM
 P:	Stephen Tweedie, Andrew Morton
 M:	sct@redhat.com, akpm@osdl.org, adilger@clusterfs.com
-L:	ext3-users@redhat.com
+L:	ext2-devel@lists.sourceforge.net
 S:	Maintained
 
 F71805F HARDWARE MONITORING DRIVER
@@ -1530,12 +1539,28 @@ W:	http://jfs.sourceforge.net/
 T:	git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
 S:	Supported
 
+JOURNALLING LAYER FOR BLOCK DEVICS (JBD)
+P:	Stephen Tweedie, Andrew Morton
+M:	sct@redhat.com, akpm@osdl.org
+L:	ext2-devel@lists.sourceforge.net
+S:	Maintained
+
 KCONFIG
 P:	Roman Zippel
 M:	zippel@linux-m68k.org
 L:	kbuild-devel@lists.sourceforge.net
 S:	Maintained
 
+KDUMP
+P:	Vivek Goyal
+M:	vgoyal@in.ibm.com
+P:	Haren Myneni
+M:	hbabu@us.ibm.com
+L:	fastboot@lists.osdl.org
+L:	linux-kernel@vger.kernel.org
+W:	http://lse.sourceforge.net/kdump/
+S:	Maintained
+
 KERNEL AUTOMOUNTER (AUTOFS)
 P:	H. Peter Anvin
 M:	hpa@zytor.com
@@ -1691,7 +1716,7 @@ M:	paulus@au.ibm.com
 P:	Anton Blanchard
 M:	anton@samba.org
 M:	anton@au.ibm.com
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 
@@ -1874,6 +1899,12 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+NETEM NETWORK EMULATOR
+P:	Stephen Hemminger
+M:	shemminger@osdl.org
+L:	netem@osdl.org
+S:	Maintained
+
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
 P:	Marc Boucher

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 17
-EXTRAVERSION =-rc4
-NAME=Sliding Snow Leopard
+EXTRAVERSION =-rc5
+NAME=Lordi Rules
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/arm/mach-pxa/mainstone.c

@@ -95,7 +95,10 @@ static void __init mainstone_init_irq(void)
 	for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
 		set_irq_chip(irq, &mainstone_irq_chip);
 		set_irq_handler(irq, do_level_IRQ);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+		if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
+		else
+			set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_flags(MAINSTONE_IRQ(8), 0);
 	set_irq_flags(MAINSTONE_IRQ(12), 0);

arch/arm/mach-s3c2410/sleep.S

@@ -59,8 +59,7 @@ ENTRY(s3c2410_cpu_suspend)
 	mrc	p15, 0, r5, c13, c0, 0	@ PID
 	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
 	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c2, c0, 0	@ auxiliary control register
-	mrc	p15, 0, r9, c1, c0, 0	@ control register
+	mrc	p15, 0, r8, c1, c0, 0	@ control register
 
 	stmia	r0, { r4 - r13 }
 
@@ -165,15 +164,14 @@ ENTRY(s3c2410_cpu_resume)
 	mcr	p15, 0, r5, c13, c0, 0		@ PID
 	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
 	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-	mcr	p15, 0, r8, c1, c1, 0		@ auxilliary control
 
 #ifdef CONFIG_DEBUG_RESUME
 	mov	r3, #'R'
 	strb	r3, [ r2, #S3C2410_UTXH ]
 #endif
 
 	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
+	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
 	nop					@ second-to-last before mmu
 	mov	pc, r2				@ go back to virtual address
 

arch/arm/mm/mm-armv.c

@@ -376,7 +376,7 @@ void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
-	if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+	if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
@@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode)
 		pgd = init_mm.pgd;
 
 	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
 		base_pmdval |= PMD_BIT4;
 
 	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {

arch/arm/mm/proc-xsc3.S

@@ -427,12 +427,13 @@ __xsc3_setup:
 #endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	bic	r0, r0, #0x0002			@ .... .... .... ..A.
 	orr	r0, r0, #0x0005			@ .... .... .... .C.M
 #if BTB_ENABLE
+	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
 #else
+	bic	r0, r0, #0x0a00			@ .... Z.R. .... ....
 	orr	r0, r0, #0x3100			@ ..VI ...S .... ....
 #endif
 #if L2_CACHE_ENABLE

arch/i386/kernel/acpi/boot.c

@@ -1066,14 +1066,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
-	{
-	 .callback = disable_acpi_pci,
-	 .ident = "HP xw9300",
-	 .matches = {
-		    DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		    DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
-		    },
-	},
 	{}
 };
 

arch/i386/kernel/apic.c

@@ -1341,6 +1341,14 @@ int __init APIC_init_uniprocessor (void)
 
 	connect_bsp_APIC();
 
+	/*
+	 * Hack: In case of kdump, after a crash, kernel might be booting
+	 * on a cpu with non-zero lapic id. But boot_cpu_physical_apicid
+	 * might be zero if read from MP tables. Get it from LAPIC.
+	 */
+#ifdef CONFIG_CRASH_DUMP
+	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+#endif
 	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
 
 	setup_local_APIC();

arch/i386/kernel/syscall_table.S

@@ -315,3 +315,4 @@ ENTRY(sys_call_table)
 	.long sys_splice
 	.long sys_sync_file_range
 	.long sys_tee			/* 315 */
+	.long sys_vmsplice

arch/i386/kernel/traps.c

@@ -130,9 +130,8 @@ static inline int print_addr_and_symbol(unsigned long addr, char *log_lvl,
 	print_symbol("%s", addr);
 
 	printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS;
-
 	if (printed)
-		printk("  ");
+		printk(" ");
 	else
 		printk("\n");
 
@@ -212,7 +211,6 @@ static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp,
 	}
 
 	stack = esp;
-	printk(log_lvl);
 	for(i = 0; i < kstack_depth_to_print; i++) {
 		if (kstack_end(stack))
 			break;

arch/i386/mach-generic/probe.c

@@ -93,9 +93,11 @@ int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 
@@ -107,9 +109,11 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 

arch/i386/mm/init.c

@@ -651,7 +651,7 @@ void __init mem_init(void)
  * Specifically, in the case of x86, we will always add
  * memory to the highmem for now.
  */
-#ifdef CONFIG_HOTPLUG_MEMORY
+#ifdef CONFIG_MEMORY_HOTPLUG
 #ifndef CONFIG_NEED_MULTIPLE_NODES
 int add_memory(u64 start, u64 size)
 {

arch/i386/power/cpu.c

@@ -92,7 +92,7 @@ void __restore_processor_state(struct saved_context *ctxt)
 	write_cr4(ctxt->cr4);
 	write_cr3(ctxt->cr3);
 	write_cr2(ctxt->cr2);
-	write_cr2(ctxt->cr0);
+	write_cr0(ctxt->cr0);
 
 	/*
 	 * now restore the descriptor tables to their proper values