Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/ker…

…nel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Another week, another batch of fixes.

  All are small, contained, targeted fixes for explicit problems --
  mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and
  Samsung."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx6q: fix suspend regression caused by common clk migration
  ARM: OMAP4470: Fix OMAP4470 boot failure
  ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry
  ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
  ARM: shmobile: r8a7779: Route all interrupts to ARM
  ARM: shmobile: kzm9d: use late init machine hook
  ARM: shmobile: kzm9g: use late init machine hook
  ARM: mach-shmobile: armadillo800eva: Use late init machine hook
  ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping
  ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel
  ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled
  ARM: shmobile: sh7372: bugfix: chclr_offset base
  ARM: shmobile: sh73a0: bugfix: SY-DMAC number
  ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL

arch/arm/mach-exynos/Kconfig

@@ -212,7 +212,7 @@ config MACH_SMDKV310
 	select EXYNOS_DEV_SYSMMU
 	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select SAMSUNG_DEV_PWM
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
@@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
@@ -303,7 +303,7 @@ config MACH_NURI
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS_DEV_DRM
 	select EXYNOS4_SETUP_FIMC
 	select EXYNOS4_SETUP_FIMD0
@@ -341,7 +341,7 @@ config MACH_ORIGEN
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_DMA
+	select EXYNOS_DEV_DMA
 	select EXYNOS4_DEV_USB_OHCI
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_SDHCI

arch/arm/mach-imx/clk-imx6q.c

@@ -152,13 +152,14 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, clk_max
+	ssi2_ipg, ssi3_ipg, rom,
+	clk_max
 };
 
 static struct clk *clk[clk_max];
 
 static enum mx6q_clks const clks_init_on[] __initconst = {
-	mmdc_ch0_axi, mmdc_ch1_axi,
+	mmdc_ch0_axi, rom,
 };
 
 int __init mx6q_clocks_init(void)
@@ -364,6 +365,7 @@ int __init mx6q_clocks_init(void)
 	clk[gpmi_bch]     = imx_clk_gate2("gpmi_bch",      "usdhc4",            base + 0x78, 26);
 	clk[gpmi_io]      = imx_clk_gate2("gpmi_io",       "enfc",              base + 0x78, 28);
 	clk[gpmi_apb]     = imx_clk_gate2("gpmi_apb",      "usdhc3",            base + 0x78, 30);
+	clk[rom]          = imx_clk_gate2("rom",           "ahb",               base + 0x7c, 0);
 	clk[sata]         = imx_clk_gate2("sata",          "ipg",               base + 0x7c, 4);
 	clk[sdma]         = imx_clk_gate2("sdma",          "ahb",               base + 0x7c, 6);
 	clk[spba]         = imx_clk_gate2("spba",          "ipg",               base + 0x7c, 12);

arch/arm/mach-omap2/board-flash.c

@@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 
 	gpmc_onenand_init(&board_onenand_data);
 }
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
 #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || \

arch/arm/mach-omap2/clock44xx_data.c

@@ -3417,9 +3417,12 @@ int __init omap4xxx_clk_init(void)
 	if (cpu_is_omap443x()) {
 		cpu_mask = RATE_IN_4430;
 		cpu_clkflg = CK_443X;
-	} else if (cpu_is_omap446x()) {
+	} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
 		cpu_mask = RATE_IN_4460 | RATE_IN_4430;
 		cpu_clkflg = CK_446X | CK_443X;
+
+		if (cpu_is_omap447x())
+			pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
 	} else {
 		return 0;
 	}

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
 	.init_irq	= r8a7740_init_irq,
 	.handle_irq	= shmobile_handle_irq_intc,
 	.init_machine	= eva_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= eva_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/board-kzm9d.c

@@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
 	.init_irq	= emev2_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kzm9d_add_standard_devices,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= kzm9d_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/board-kzm9g.c

@@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g")
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= kzm_init,
+	.init_late	= shmobile_init_late,
 	.timer		= &shmobile_timer,
 	.dt_compat	= kzm9g_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/board-mackerel.c

@@ -1512,6 +1512,9 @@ static void __init mackerel_init(void)
 	gpio_request(GPIO_FN_SDHID0_1, NULL);
 	gpio_request(GPIO_FN_SDHID0_0, NULL);
 
+	/* SDHI0 PORT172 card-detect IRQ26 */
+	gpio_request(GPIO_FN_IRQ26_172, NULL);
+
 #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
 	/* enable SDHI1 */
 	gpio_request(GPIO_FN_SDHICMD1, NULL);

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = {
 
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
-	MSTP219,
+	MSTP219, MSTP218,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-	MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
+	MSTP331, MSTP329, MSTP325, MSTP323,
 	MSTP314, MSTP313, MSTP312, MSTP311,
 	MSTP303, MSTP302, MSTP301, MSTP300,
 	MSTP411, MSTP410, MSTP403,
@@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
 	[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
 	[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
 	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
 	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
 	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
@@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
 	[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
 	[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
-	[MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
 	[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
@@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
 	CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
 	CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
@@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
-	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */

arch/arm/mach-shmobile/intc-r8a7779.c

@@ -35,6 +35,9 @@
 #define INT2SMSKCR3 0xfe7822ac
 #define INT2SMSKCR4 0xfe7822b0
 
+#define INT2NTSR0 0xfe700060
+#define INT2NTSR1 0xfe700064
+
 static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
 {
 	return 0; /* always allow wakeup */
@@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void)
 	gic_init(0, 29, gic_dist_base, gic_cpu_base);
 	gic_arch_extn.irq_set_wake = r8a7779_set_wake;
 
+	/* route all interrupts to ARM */
+	__raw_writel(0xffffffff, INT2NTSR0);
+	__raw_writel(0x3fffffff, INT2NTSR1);
+
 	/* unmask all known interrupts in INTCS2 */
 	__raw_writel(0xfffffff0, INT2SMSKCR0);
 	__raw_writel(0xfff7ffff, INT2SMSKCR1);

arch/arm/mach-shmobile/platsmp.c

@@ -25,7 +25,12 @@
 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
 			of_machine_is_compatible("renesas,sh73a0"))
 #define is_r8a7779() machine_is_marzen()
+
+#ifdef CONFIG_ARCH_EMEV2
 #define is_emev2() of_machine_is_compatible("renesas,emev2")
+#else
+#define is_emev2() (0)
+#endif
 
 static unsigned int __init shmobile_smp_get_core_count(void)
 {

arch/arm/mach-shmobile/setup-sh7372.c

@@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
 	},
 };
 
-#define SH7372_CHCLR 0x220
+#define SH7372_CHCLR (0x220 - 0x20)
 
 static const struct sh_dmae_channel sh7372_dmae_channels[] = {
 	{

arch/arm/plat-samsung/include/plat/map-s3c.h

@@ -22,7 +22,7 @@
 #define S3C24XX_VA_WATCHDOG	S3C_VA_WATCHDOG
 
 #define S3C2412_VA_SSMC		S3C_ADDR_CPU(0x00000000)
-#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00010000)
+#define S3C2412_VA_EBI		S3C_ADDR_CPU(0x00100000)
 
 #define S3C2410_PA_UART		(0x50000000)
 #define S3C24XX_PA_UART		S3C2410_PA_UART

arch/arm/plat-samsung/include/plat/watchdog-reset.h

@@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void)
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
 
-	if (s3c2410_wdtclk)
+	if (!IS_ERR(s3c2410_wdtclk))
 		clk_enable(s3c2410_wdtclk);
 
 	/* put initial values into count and data */