Merge branch 'backlight-rework' into drm-intel-next-queued

Pull in Jani's backlight rework branch. This was merged through a
separate branch to be able to sort out the Broadwell conflicts
properly before pulling it into the main development branch.

Conflicts:
	drivers/gpu/drm/i915/intel_display.c

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

MAINTAINERS

@@ -2834,7 +2834,9 @@ L:	dri-devel@lists.freedesktop.org
 L:	linux-tegra@vger.kernel.org
 T:	git git://anongit.freedesktop.org/tegra/linux.git
 S:	Supported
+F:	drivers/gpu/drm/tegra/
 F:	drivers/gpu/host1x/
+F:	include/linux/host1x.h
 F:	include/uapi/drm/tegra_drm.h
 F:	Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt
 

arch/x86/kernel/early-quirks.c

@@ -313,6 +313,16 @@ static size_t __init gen6_stolen_size(int num, int slot, int func)
 	return gmch_ctrl << 25; /* 32 MB units */
 }
 
+static inline size_t gen8_stolen_size(int num, int slot, int func)
+{
+	u16 gmch_ctrl;
+
+	gmch_ctrl = read_pci_config_16(num, slot, func, SNB_GMCH_CTRL);
+	gmch_ctrl >>= BDW_GMCH_GMS_SHIFT;
+	gmch_ctrl &= BDW_GMCH_GMS_MASK;
+	return gmch_ctrl << 25; /* 32 MB units */
+}
+
 typedef size_t (*stolen_size_fn)(int num, int slot, int func);
 
 static struct pci_device_id intel_stolen_ids[] __initdata = {
@@ -336,6 +346,8 @@ static struct pci_device_id intel_stolen_ids[] __initdata = {
 	INTEL_IVB_D_IDS(gen6_stolen_size),
 	INTEL_HSW_D_IDS(gen6_stolen_size),
 	INTEL_HSW_M_IDS(gen6_stolen_size),
+	INTEL_BDW_M_IDS(gen8_stolen_size),
+	INTEL_BDW_D_IDS(gen8_stolen_size)
 };
 
 static void __init intel_graphics_stolen(int num, int slot, int func)

drivers/gpu/drm/Kconfig

@@ -176,6 +176,8 @@ source "drivers/gpu/drm/mgag200/Kconfig"
 
 source "drivers/gpu/drm/cirrus/Kconfig"
 
+source "drivers/gpu/drm/armada/Kconfig"
+
 source "drivers/gpu/drm/rcar-du/Kconfig"
 
 source "drivers/gpu/drm/shmobile/Kconfig"
@@ -187,3 +189,5 @@ source "drivers/gpu/drm/tilcdc/Kconfig"
 source "drivers/gpu/drm/qxl/Kconfig"
 
 source "drivers/gpu/drm/msm/Kconfig"
+
+source "drivers/gpu/drm/tegra/Kconfig"

drivers/gpu/drm/Makefile

@@ -50,10 +50,12 @@ obj-$(CONFIG_DRM_EXYNOS) +=exynos/
 obj-$(CONFIG_DRM_GMA500) += gma500/
 obj-$(CONFIG_DRM_UDL) += udl/
 obj-$(CONFIG_DRM_AST) += ast/
+obj-$(CONFIG_DRM_ARMADA) += armada/
 obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
 obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
 obj-$(CONFIG_DRM_OMAP)	+= omapdrm/
 obj-$(CONFIG_DRM_TILCDC)	+= tilcdc/
 obj-$(CONFIG_DRM_QXL) += qxl/
 obj-$(CONFIG_DRM_MSM) += msm/
+obj-$(CONFIG_DRM_TEGRA) += tegra/
 obj-y			+= i2c/

drivers/gpu/drm/armada/Kconfig

@@ -0,0 +1,24 @@
+config DRM_ARMADA
+	tristate "DRM support for Marvell Armada SoCs"
+	depends on DRM && HAVE_CLK && ARM
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select DRM_KMS_HELPER
+	help
+	  Support the "LCD" controllers found on the Marvell Armada 510
+	  devices.  There are two controllers on the device, each controller
+	  supports graphics and video overlays.
+
+	  This driver provides no built-in acceleration; acceleration is
+	  performed by other IP found on the SoC.  This driver provides
+	  kernel mode setting and buffer management to userspace.
+
+config DRM_ARMADA_TDA1998X
+	bool "Support TDA1998X HDMI output"
+	depends on DRM_ARMADA != n
+	depends on I2C && DRM_I2C_NXP_TDA998X = y
+	default y
+	help
+	  Support the TDA1998x HDMI output device found on the Solid-Run
+	  CuBox.

drivers/gpu/drm/armada/Makefile

@@ -0,0 +1,7 @@
+armada-y	:= armada_crtc.o armada_drv.o armada_fb.o armada_fbdev.o \
+		   armada_gem.o armada_output.o armada_overlay.o \
+		   armada_slave.o
+armada-y	+= armada_510.o
+armada-$(CONFIG_DEBUG_FS) += armada_debugfs.o
+
+obj-$(CONFIG_DRM_ARMADA) := armada.o

drivers/gpu/drm/armada/armada_510.c

@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2012 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Armada 510 (aka Dove) variant support
+ */
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include "armada_crtc.h"
+#include "armada_drm.h"
+#include "armada_hw.h"
+
+static int armada510_init(struct armada_private *priv, struct device *dev)
+{
+	priv->extclk[0] = devm_clk_get(dev, "ext_ref_clk_1");
+
+	if (IS_ERR(priv->extclk[0]) && PTR_ERR(priv->extclk[0]) == -ENOENT)
+		priv->extclk[0] = ERR_PTR(-EPROBE_DEFER);
+
+	return PTR_RET(priv->extclk[0]);
+}
+
+static int armada510_crtc_init(struct armada_crtc *dcrtc)
+{
+	/* Lower the watermark so to eliminate jitter at higher bandwidths */
+	armada_updatel(0x20, (1 << 11) | 0xff, dcrtc->base + LCD_CFG_RDREG4F);
+	return 0;
+}
+
+/*
+ * Armada510 specific SCLK register selection.
+ * This gets called with sclk = NULL to test whether the mode is
+ * supportable, and again with sclk != NULL to set the clocks up for
+ * that.  The former can return an error, but the latter is expected
+ * not to.
+ *
+ * We currently are pretty rudimentary here, always selecting
+ * EXT_REF_CLK_1 for LCD0 and erroring LCD1.  This needs improvement!
+ */
+static int armada510_crtc_compute_clock(struct armada_crtc *dcrtc,
+	const struct drm_display_mode *mode, uint32_t *sclk)
+{
+	struct armada_private *priv = dcrtc->crtc.dev->dev_private;
+	struct clk *clk = priv->extclk[0];
+	int ret;
+
+	if (dcrtc->num == 1)
+		return -EINVAL;
+
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	if (dcrtc->clk != clk) {
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			return ret;
+		dcrtc->clk = clk;
+	}
+
+	if (sclk) {
+		uint32_t rate, ref, div;
+
+		rate = mode->clock * 1000;
+		ref = clk_round_rate(clk, rate);
+		div = DIV_ROUND_UP(ref, rate);
+		if (div < 1)
+			div = 1;
+
+		clk_set_rate(clk, ref);
+		*sclk = div | SCLK_510_EXTCLK1;
+	}
+
+	return 0;
+}
+
+const struct armada_variant armada510_ops = {
+	.has_spu_adv_reg = true,
+	.spu_adv_reg = ADV_HWC32ENABLE | ADV_HWC32ARGB | ADV_HWC32BLEND,
+	.init = armada510_init,
+	.crtc_init = armada510_crtc_init,
+	.crtc_compute_clock = armada510_crtc_compute_clock,
+};