net: phylink: split phylink_sfp_module_insert()

Split out the configuration step from phylink_sfp_module_insert() so
we can re-use this later.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/phylink.c

@@ -1684,25 +1684,21 @@ static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
 	pl->netdev->sfp_bus = NULL;
 }
 
-static int phylink_sfp_module_insert(void *upstream,
-				     const struct sfp_eeprom_id *id)
+static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port,
+			      const unsigned long *supported,
+			      const unsigned long *advertising)
 {
-	struct phylink *pl = upstream;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support);
 	struct phylink_link_state config;
 	phy_interface_t iface;
-	int ret = 0;
 	bool changed;
-	u8 port;
-
-	ASSERT_RTNL();
+	int ret;
 
-	sfp_parse_support(pl->sfp_bus, id, support);
-	port = sfp_parse_port(pl->sfp_bus, id, support);
+	linkmode_copy(support, supported);
 
 	memset(&config, 0, sizeof(config));
-	linkmode_copy(config.advertising, support);
+	linkmode_copy(config.advertising, advertising);
 	config.interface = PHY_INTERFACE_MODE_NA;
 	config.speed = SPEED_UNKNOWN;
 	config.duplex = DUPLEX_UNKNOWN;
@@ -1717,8 +1713,6 @@ static int phylink_sfp_module_insert(void *upstream,
 		return ret;
 	}
 
-	linkmode_copy(support1, support);
-
 	iface = sfp_select_interface(pl->sfp_bus, config.advertising);
 	if (iface == PHY_INTERFACE_MODE_NA) {
 		phylink_err(pl,
@@ -1728,18 +1722,18 @@ static int phylink_sfp_module_insert(void *upstream,
 	}
 
 	config.interface = iface;
+	linkmode_copy(support1, support);
 	ret = phylink_validate(pl, support1, &config);
 	if (ret) {
 		phylink_err(pl, "validation of %s/%s with support %*pb failed: %d\n",
-			    phylink_an_mode_str(MLO_AN_INBAND),
+			    phylink_an_mode_str(mode),
 			    phy_modes(config.interface),
 			    __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
 		return ret;
 	}
 
 	phylink_dbg(pl, "requesting link mode %s/%s with support %*pb\n",
-		    phylink_an_mode_str(MLO_AN_INBAND),
-		    phy_modes(config.interface),
+		    phylink_an_mode_str(mode), phy_modes(config.interface),
 		    __ETHTOOL_LINK_MODE_MASK_NBITS, support);
 
 	if (phy_interface_mode_is_8023z(iface) && pl->phydev)
@@ -1751,15 +1745,15 @@ static int phylink_sfp_module_insert(void *upstream,
 		linkmode_copy(pl->link_config.advertising, config.advertising);
 	}
 
-	if (pl->cur_link_an_mode != MLO_AN_INBAND ||
+	if (pl->cur_link_an_mode != mode ||
 	    pl->link_config.interface != config.interface) {
 		pl->link_config.interface = config.interface;
-		pl->cur_link_an_mode = MLO_AN_INBAND;
+		pl->cur_link_an_mode = mode;
 
 		changed = true;
 
 		phylink_info(pl, "switched to %s/%s link mode\n",
-			     phylink_an_mode_str(MLO_AN_INBAND),
+			     phylink_an_mode_str(mode),
 			     phy_modes(config.interface));
 	}
 
@@ -1772,6 +1766,21 @@ static int phylink_sfp_module_insert(void *upstream,
 	return ret;
 }
 
+static int phylink_sfp_module_insert(void *upstream,
+				     const struct sfp_eeprom_id *id)
+{
+	struct phylink *pl = upstream;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	u8 port;
+
+	ASSERT_RTNL();
+
+	sfp_parse_support(pl->sfp_bus, id, support);
+	port = sfp_parse_port(pl->sfp_bus, id, support);
+
+	return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support);
+}
+
 static int phylink_sfp_module_start(void *upstream)
 {
 	struct phylink *pl = upstream;