EDAC/qcom: Correct interrupt enable register configuration

The previous implementation incorrectly configured the cmn_interrupt_2_enable
register for interrupt handling. Using cmn_interrupt_2_enable to configure
Tag, Data RAM ECC interrupts would lead to issues like double handling of the
interrupts (EL1 and EL3) as cmn_interrupt_2_enable is meant to be configured
for interrupts which needs to be handled by EL3.

EL1 LLCC EDAC driver needs to use cmn_interrupt_0_enable register to configure
Tag, Data RAM ECC interrupts instead of cmn_interrupt_2_enable.

Fixes: 2745065 ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20241119064608.12326-1-quic_kbajaj@quicinc.com

drivers/edac/qcom_edac.c

@@ -95,7 +95,7 @@ static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_b
 	 * Configure interrupt enable registers such that Tag, Data RAM related
 	 * interrupts are propagated to interrupt controller for servicing
 	 */
-	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable,
+	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_0_enable,
 				 TRP0_INTERRUPT_ENABLE,
 				 TRP0_INTERRUPT_ENABLE);
 	if (ret)
@@ -113,7 +113,7 @@ static int qcom_llcc_core_setup(struct llcc_drv_data *drv, struct regmap *llcc_b
 	if (ret)
 		return ret;
 
-	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_2_enable,
+	ret = regmap_update_bits(llcc_bcast_regmap, drv->edac_reg_offset->cmn_interrupt_0_enable,
 				 DRP0_INTERRUPT_ENABLE,
 				 DRP0_INTERRUPT_ENABLE);
 	if (ret)