Merge tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/tty

Pull TTY/Serial patches from Greg Kroah-Hartman:
 "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and
  serial drivers.  They were cherry-picked from the tty-next branch of
  the tty git tree, as they are small and "obvious" fixes.  The larger
  changes, as mentioned before, will be saved for the 3.7-rc1 merge
  window.

  All of these changes have been in the linux-next releases for quite a
  while.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  pch_uart: Fix parity setting issue
  pch_uart: Fix rx error interrupt setting issue
  pch_uart: Fix missing break for 16 byte fifo
  tty ldisc: Close/Reopen race prevention should check the proper flag
  pch_uart: Add eg20t_port lock field, avoid recursive spinlocks
  vt: fix race in vt_waitactive()
  serial/of-serial: Add LPC3220 standard UART compatible string
  serial/8250: Add LPC3220 standard UART type
  serial_core: Update buffer overrun statistics.
  serial: samsung: Fixed wrong comparison for baudclk_rate

Documentation/devicetree/bindings/tty/serial/of-serial.txt

@@ -9,6 +9,7 @@ Required properties:
 	- "ns16750"
 	- "ns16850"
 	- "nvidia,tegra20-uart"
+	- "nxp,lpc3220-uart"
 	- "ibm,qpace-nwp-serial"
 	- "serial" if the port type is unknown.
 - reg : offset and length of the register set for the device.

drivers/tty/serial/8250/8250.c

@@ -282,6 +282,14 @@ static const struct serial8250_config uart_config[] = {
 		.fcr		= UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
 		.flags		= UART_CAP_FIFO | UART_CAP_AFE | UART_CAP_EFR,
 	},
+	[PORT_LPC3220] = {
+		.name		= "LPC3220",
+		.fifo_size	= 64,
+		.tx_loadsz	= 32,
+		.fcr		= UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
+				  UART_FCR_R_TRIG_00 | UART_FCR_T_TRIG_00,
+		.flags		= UART_CAP_FIFO,
+	},
 };
 
 /* Uart divisor latch read */

drivers/tty/serial/of_serial.c

@@ -208,6 +208,7 @@ static struct of_device_id __devinitdata of_platform_serial_table[] = {
 	{ .compatible = "ns16750",  .data = (void *)PORT_16750, },
 	{ .compatible = "ns16850",  .data = (void *)PORT_16850, },
 	{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
+	{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
 	{ .compatible = "ibm,qpace-nwp-serial",
 		.data = (void *)PORT_NWPSERIAL, },

drivers/tty/serial/pch_uart.c

@@ -253,6 +253,9 @@ struct eg20t_port {
 	dma_addr_t			rx_buf_dma;
 
 	struct dentry	*debugfs;
+
+	/* protect the eg20t_port private structure and io access to membase */
+	spinlock_t lock;
 };
 
 /**
@@ -754,7 +757,8 @@ static void pch_dma_rx_complete(void *arg)
 		tty_flip_buffer_push(tty);
 	tty_kref_put(tty);
 	async_tx_ack(priv->desc_rx);
-	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+					    PCH_UART_HAL_RX_ERR_INT);
 }
 
 static void pch_dma_tx_complete(void *arg)
@@ -809,7 +813,8 @@ static int handle_rx_to(struct eg20t_port *priv)
 	int rx_size;
 	int ret;
 	if (!priv->start_rx) {
-		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+		pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+						     PCH_UART_HAL_RX_ERR_INT);
 		return 0;
 	}
 	buf = &priv->rxbuf;
@@ -1058,7 +1063,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 	int next = 1;
 	u8 msr;
 
-	spin_lock_irqsave(&priv->port.lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	handled = 0;
 	while (next) {
 		iid = pch_uart_hal_get_iid(priv);
@@ -1078,11 +1083,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 		case PCH_UART_IID_RDR:	/* Received Data Ready */
 			if (priv->use_dma) {
 				pch_uart_hal_disable_interrupt(priv,
-							PCH_UART_HAL_RX_INT);
+						PCH_UART_HAL_RX_INT |
+						PCH_UART_HAL_RX_ERR_INT);
 				ret = dma_handle_rx(priv);
 				if (!ret)
 					pch_uart_hal_enable_interrupt(priv,
-							PCH_UART_HAL_RX_INT);
+						PCH_UART_HAL_RX_INT |
+						PCH_UART_HAL_RX_ERR_INT);
 			} else {
 				ret = handle_rx(priv);
 			}
@@ -1116,7 +1123,7 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
 		handled |= (unsigned int)ret;
 	}
 
-	spin_unlock_irqrestore(&priv->port.lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 	return IRQ_RETVAL(handled);
 }
 
@@ -1208,7 +1215,8 @@ static void pch_uart_stop_rx(struct uart_port *port)
 	struct eg20t_port *priv;
 	priv = container_of(port, struct eg20t_port, port);
 	priv->start_rx = 0;
-	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+	pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+					     PCH_UART_HAL_RX_ERR_INT);
 }
 
 /* Enable the modem status interrupts. */
@@ -1226,9 +1234,9 @@ static void pch_uart_break_ctl(struct uart_port *port, int ctl)
 	unsigned long flags;
 
 	priv = container_of(port, struct eg20t_port, port);
-	spin_lock_irqsave(&port->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
 	pch_uart_hal_set_break(priv, ctl);
-	spin_unlock_irqrestore(&port->lock, flags);
+	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 /* Grab any interrupt resources and initialise any low level driver state. */
@@ -1263,6 +1271,7 @@ static int pch_uart_startup(struct uart_port *port)
 		break;
 	case 16:
 		fifo_size = PCH_UART_HAL_FIFO16;
+		break;
 	case 1:
 	default:
 		fifo_size = PCH_UART_HAL_FIFO_DIS;
@@ -1300,7 +1309,8 @@ static int pch_uart_startup(struct uart_port *port)
 		pch_request_dma(port);
 
 	priv->start_rx = 1;
-	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+	pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+					    PCH_UART_HAL_RX_ERR_INT);
 	uart_update_timeout(port, CS8, default_baud);
 
 	return 0;
@@ -1358,7 +1368,7 @@ static void pch_uart_set_termios(struct uart_port *port,
 		stb = PCH_UART_HAL_STB1;
 
 	if (termios->c_cflag & PARENB) {
-		if (!(termios->c_cflag & PARODD))
+		if (termios->c_cflag & PARODD)
 			parity = PCH_UART_HAL_PARITY_ODD;
 		else
 			parity = PCH_UART_HAL_PARITY_EVEN;
@@ -1376,7 +1386,8 @@ static void pch_uart_set_termios(struct uart_port *port,
 
 	baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
 
-	spin_lock_irqsave(&port->lock, flags);
+	spin_lock_irqsave(&priv->lock, flags);
+	spin_lock(&port->lock);
 
 	uart_update_timeout(port, termios->c_cflag, baud);
 	rtn = pch_uart_hal_set_line(priv, baud, parity, bits, stb);
@@ -1389,7 +1400,8 @@ static void pch_uart_set_termios(struct uart_port *port,
 		tty_termios_encode_baud_rate(termios, baud, baud);
 
 out:
-	spin_unlock_irqrestore(&port->lock, flags);
+	spin_unlock(&port->lock);
+	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static const char *pch_uart_type(struct uart_port *port)
@@ -1538,21 +1550,26 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
 {
 	struct eg20t_port *priv;
 	unsigned long flags;
+	int priv_locked = 1;
+	int port_locked = 1;
 	u8 ier;
-	int locked = 1;
 
 	priv = pch_uart_ports[co->index];
 
 	touch_nmi_watchdog();
 
 	local_irq_save(flags);
 	if (priv->port.sysrq) {
-		/* serial8250_handle_port() already took the lock */
-		locked = 0;
+		spin_lock(&priv->lock);
+		/* serial8250_handle_port() already took the port lock */
+		port_locked = 0;
 	} else if (oops_in_progress) {
-		locked = spin_trylock(&priv->port.lock);
-	} else
+		priv_locked = spin_trylock(&priv->lock);
+		port_locked = spin_trylock(&priv->port.lock);
+	} else {
+		spin_lock(&priv->lock);
 		spin_lock(&priv->port.lock);
+	}
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -1570,8 +1587,10 @@ pch_console_write(struct console *co, const char *s, unsigned int count)
 	wait_for_xmitr(priv, BOTH_EMPTY);
 	iowrite8(ier, priv->membase + UART_IER);
 
-	if (locked)
+	if (port_locked)
 		spin_unlock(&priv->port.lock);
+	if (priv_locked)
+		spin_unlock(&priv->lock);
 	local_irq_restore(flags);
 }
 
@@ -1669,6 +1688,8 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	pci_enable_msi(pdev);
 	pci_set_master(pdev);
 
+	spin_lock_init(&priv->lock);
+
 	iobase = pci_resource_start(pdev, 0);
 	mapbase = pci_resource_start(pdev, 1);
 	priv->mapbase = mapbase;

drivers/tty/serial/samsung.c

@@ -1014,10 +1014,10 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
 	 * a disturbance in the clock-rate over the change.
 	 */
 
-	if (IS_ERR(port->clk))
+	if (IS_ERR(port->baudclk))
 		goto exit;
 
-	if (port->baudclk_rate == clk_get_rate(port->clk))
+	if (port->baudclk_rate == clk_get_rate(port->baudclk))
 		goto exit;
 
 	if (val == CPUFREQ_PRECHANGE) {

drivers/tty/serial/serial_core.c

@@ -2527,14 +2527,16 @@ void uart_insert_char(struct uart_port *port, unsigned int status,
 	struct tty_struct *tty = port->state->port.tty;
 
 	if ((status & port->ignore_status_mask & ~overrun) == 0)
-		tty_insert_flip_char(tty, ch, flag);
+		if (tty_insert_flip_char(tty, ch, flag) == 0)
+			++port->icount.buf_overrun;
 
 	/*
 	 * Overrun is special.  Since it's reported immediately,
 	 * it doesn't affect the current character.
 	 */
 	if (status & ~port->ignore_status_mask & overrun)
-		tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		if (tty_insert_flip_char(tty, 0, TTY_OVERRUN) == 0)
+			++port->icount.buf_overrun;
 }
 EXPORT_SYMBOL_GPL(uart_insert_char);
 

drivers/tty/tty_ldisc.c

@@ -659,7 +659,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 		goto enable;
 	}
 
-	if (test_bit(TTY_HUPPED, &tty->flags)) {
+	if (test_bit(TTY_HUPPING, &tty->flags)) {
 		/* We were raced by the hangup method. It will have stomped
 		   the ldisc data and closed the ldisc down */
 		clear_bit(TTY_LDISC_CHANGING, &tty->flags);

drivers/tty/vt/vt_ioctl.c

@@ -110,16 +110,7 @@ void vt_event_post(unsigned int event, unsigned int old, unsigned int new)
 		wake_up_interruptible(&vt_event_waitqueue);
 }
 
-/**
- *	vt_event_wait		-	wait for an event
- *	@vw: our event
- *
- *	Waits for an event to occur which completes our vt_event_wait
- *	structure. On return the structure has wv->done set to 1 for success
- *	or 0 if some event such as a signal ended the wait.
- */
-
-static void vt_event_wait(struct vt_event_wait *vw)
+static void __vt_event_queue(struct vt_event_wait *vw)
 {
 	unsigned long flags;
 	/* Prepare the event */
@@ -129,14 +120,40 @@ static void vt_event_wait(struct vt_event_wait *vw)
 	spin_lock_irqsave(&vt_event_lock, flags);
 	list_add(&vw->list, &vt_events);
 	spin_unlock_irqrestore(&vt_event_lock, flags);
+}
+
+static void __vt_event_wait(struct vt_event_wait *vw)
+{
 	/* Wait for it to pass */
 	wait_event_interruptible(vt_event_waitqueue, vw->done);
+}
+
+static void __vt_event_dequeue(struct vt_event_wait *vw)
+{
+	unsigned long flags;
+
 	/* Dequeue it */
 	spin_lock_irqsave(&vt_event_lock, flags);
 	list_del(&vw->list);
 	spin_unlock_irqrestore(&vt_event_lock, flags);
 }
 
+/**
+ *	vt_event_wait		-	wait for an event
+ *	@vw: our event
+ *
+ *	Waits for an event to occur which completes our vt_event_wait
+ *	structure. On return the structure has wv->done set to 1 for success
+ *	or 0 if some event such as a signal ended the wait.
+ */
+
+static void vt_event_wait(struct vt_event_wait *vw)
+{
+	__vt_event_queue(vw);
+	__vt_event_wait(vw);
+	__vt_event_dequeue(vw);
+}
+
 /**
  *	vt_event_wait_ioctl	-	event ioctl handler
  *	@arg: argument to ioctl
@@ -177,10 +194,14 @@ int vt_waitactive(int n)
 {
 	struct vt_event_wait vw;
 	do {
-		if (n == fg_console + 1)
-			break;
 		vw.event.event = VT_EVENT_SWITCH;
-		vt_event_wait(&vw);
+		__vt_event_queue(&vw);
+		if (n == fg_console + 1) {
+			__vt_event_dequeue(&vw);
+			break;
+		}
+		__vt_event_wait(&vw);
+		__vt_event_dequeue(&vw);
 		if (vw.done == 0)
 			return -EINTR;
 	} while (vw.event.newev != n);

include/linux/serial_core.h

@@ -47,7 +47,8 @@
 #define PORT_U6_16550A	19	/* ST-Ericsson U6xxx internal UART */
 #define PORT_TEGRA	20	/* NVIDIA Tegra internal UART */
 #define PORT_XR17D15X	21	/* Exar XR17D15x UART */
-#define PORT_MAX_8250	21	/* max port ID */
+#define PORT_LPC3220	22	/* NXP LPC32xx SoC "Standard" UART */
+#define PORT_MAX_8250	22	/* max port ID */
 
 /*
  * ARM specific type numbers.  These are not currently guaranteed