Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/jikos/hid

Pull HID fixes from Jiri Kosina:

 - modprobe-after-rmmod load failure bugfix for intel-ish, from Even Xu

 - IRQ probing bugfix for intel-ish, from Srinivas Pandruvada

 - attribute parsing fix in hid-sensor, from Ooi, Joyce

 - other small misc fixes / quirky device additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: sensor: fix attributes in HID sensor interface
  HID: intel-ish-hid: request_irq failure
  HID: intel-ish-hid: Fix driver reinit failure
  HID: intel-ish-hid: Move DMA disable code to new function
  HID: intel-ish-hid: consolidate ish wake up operation
  HID: usbhid: add ATEN CS962 to list of quirky devices
  HID: intel-ish-hid: Fix !CONFIG_PM build warning
  HID: sensor-hub: Fix packing of result buffer for feature report

drivers/hid/hid-ids.h

@@ -179,6 +179,7 @@
 #define USB_DEVICE_ID_ATEN_4PORTKVM	0x2205
 #define USB_DEVICE_ID_ATEN_4PORTKVMC	0x2208
 #define USB_DEVICE_ID_ATEN_CS682	0x2213
+#define USB_DEVICE_ID_ATEN_CS692	0x8021
 
 #define USB_VENDOR_ID_ATMEL		0x03eb
 #define USB_DEVICE_ID_ATMEL_MULTITOUCH	0x211c

drivers/hid/hid-sensor-custom.c

@@ -292,11 +292,11 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr,
 	bool input = false;
 	int value = 0;
 
-	if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage,
+	if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage,
 		   name) == 3) {
 		feature = true;
 		field_index = index + sensor_inst->input_field_count;
-	} else if (sscanf(attr->attr.name, "input-%d-%x-%s", &index, &usage,
+	} else if (sscanf(attr->attr.name, "input-%x-%x-%s", &index, &usage,
 		   name) == 3) {
 		input = true;
 		field_index = index;
@@ -398,7 +398,7 @@ static ssize_t store_value(struct device *dev, struct device_attribute *attr,
 	char name[HID_CUSTOM_NAME_LENGTH];
 	int value;
 
-	if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage,
+	if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage,
 		   name) == 3) {
 		field_index = index + sensor_inst->input_field_count;
 	} else

drivers/hid/hid-sensor-hub.c

@@ -251,6 +251,9 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 	struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev);
 	int report_size;
 	int ret = 0;
+	u8 *val_ptr;
+	int buffer_index = 0;
+	int i;
 
 	mutex_lock(&data->mutex);
 	report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT);
@@ -271,7 +274,17 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id,
 		goto done_proc;
 	}
 	ret = min(report_size, buffer_size);
-	memcpy(buffer, report->field[field_index]->value, ret);
+
+	val_ptr = (u8 *)report->field[field_index]->value;
+	for (i = 0; i < report->field[field_index]->report_count; ++i) {
+		if (buffer_index >= ret)
+			break;
+
+		memcpy(&((u8 *)buffer)[buffer_index], val_ptr,
+		       report->field[field_index]->report_size / 8);
+		val_ptr += sizeof(__s32);
+		buffer_index += (report->field[field_index]->report_size / 8);
+	}
 
 done_proc:
 	mutex_unlock(&data->mutex);

drivers/hid/intel-ish-hid/ipc/ipc.c

@@ -637,6 +637,58 @@ irqreturn_t ish_irq_handler(int irq, void *dev_id)
 	return	IRQ_HANDLED;
 }
 
+/**
+ * ish_disable_dma() - disable dma communication between host and ISHFW
+ * @dev: ishtp device pointer
+ *
+ * Clear the dma enable bit and wait for dma inactive.
+ *
+ * Return: 0 for success else error code.
+ */
+static int ish_disable_dma(struct ishtp_device *dev)
+{
+	unsigned int	dma_delay;
+
+	/* Clear the dma enable bit */
+	ish_reg_write(dev, IPC_REG_ISH_RMP2, 0);
+
+	/* wait for dma inactive */
+	for (dma_delay = 0; dma_delay < MAX_DMA_DELAY &&
+		_ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA);
+		dma_delay += 5)
+		mdelay(5);
+
+	if (dma_delay >= MAX_DMA_DELAY) {
+		dev_err(dev->devc,
+			"Wait for DMA inactive timeout\n");
+		return	-EBUSY;
+	}
+
+	return 0;
+}
+
+/**
+ * ish_wakeup() - wakeup ishfw from waiting-for-host state
+ * @dev: ishtp device pointer
+ *
+ * Set the dma enable bit and send a void message to FW,
+ * it wil wakeup FW from waiting-for-host state.
+ */
+static void ish_wakeup(struct ishtp_device *dev)
+{
+	/* Set dma enable bit */
+	ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
+
+	/*
+	 * Send 0 IPC message so that ISH FW wakes up if it was already
+	 * asleep.
+	 */
+	ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
+
+	/* Flush writes to doorbell and REMAP2 */
+	ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+}
+
 /**
  * _ish_hw_reset() - HW reset
  * @dev: ishtp device pointer
@@ -649,7 +701,6 @@ static int _ish_hw_reset(struct ishtp_device *dev)
 {
 	struct pci_dev *pdev = dev->pdev;
 	int	rv;
-	unsigned int	dma_delay;
 	uint16_t csr;
 
 	if (!pdev)
@@ -664,15 +715,8 @@ static int _ish_hw_reset(struct ishtp_device *dev)
 		return	-EINVAL;
 	}
 
-	/* Now trigger reset to FW */
-	ish_reg_write(dev, IPC_REG_ISH_RMP2, 0);
-
-	for (dma_delay = 0; dma_delay < MAX_DMA_DELAY &&
-		_ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA);
-		dma_delay += 5)
-		mdelay(5);
-
-	if (dma_delay >= MAX_DMA_DELAY) {
+	/* Disable dma communication between FW and host */
+	if (ish_disable_dma(dev)) {
 		dev_err(&pdev->dev,
 			"Can't reset - stuck with DMA in-progress\n");
 		return	-EBUSY;
@@ -690,16 +734,8 @@ static int _ish_hw_reset(struct ishtp_device *dev)
 	csr |= PCI_D0;
 	pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
 
-	ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
-
-	/*
-	 * Send 0 IPC message so that ISH FW wakes up if it was already
-	 * asleep
-	 */
-	ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
-
-	/* Flush writes to doorbell and REMAP2 */
-	ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+	/* Now we can enable ISH DMA operation and wakeup ISHFW */
+	ish_wakeup(dev);
 
 	return	0;
 }
@@ -758,16 +794,9 @@ static int _ish_ipc_reset(struct ishtp_device *dev)
 int ish_hw_start(struct ishtp_device *dev)
 {
 	ish_set_host_rdy(dev);
-	/* After that we can enable ISH DMA operation */
-	ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
 
-	/*
-	 * Send 0 IPC message so that ISH FW wakes up if it was already
-	 * asleep
-	 */
-	ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
-	/* Flush write to doorbell */
-	ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+	/* After that we can enable ISH DMA operation and wakeup ISHFW */
+	ish_wakeup(dev);
 
 	set_host_ready(dev);
 
@@ -876,6 +905,21 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
  */
 void	ish_device_disable(struct ishtp_device *dev)
 {
+	struct pci_dev *pdev = dev->pdev;
+
+	if (!pdev)
+		return;
+
+	/* Disable dma communication between FW and host */
+	if (ish_disable_dma(dev)) {
+		dev_err(&pdev->dev,
+			"Can't reset - stuck with DMA in-progress\n");
+		return;
+	}
+
+	/* Put ISH to D3hot state for power saving */
+	pci_set_power_state(pdev, PCI_D3hot);
+
 	dev->dev_state = ISHTP_DEV_DISABLED;
 	ish_clr_host_rdy(dev);
 }

drivers/hid/intel-ish-hid/ipc/pci-ish.c

@@ -146,7 +146,7 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
 
 	/* request and enable interrupt */
-	ret = request_irq(pdev->irq, ish_irq_handler, IRQF_NO_SUSPEND,
+	ret = request_irq(pdev->irq, ish_irq_handler, IRQF_SHARED,
 			  KBUILD_MODNAME, dev);
 	if (ret) {
 		dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n",
@@ -202,6 +202,7 @@ static void ish_remove(struct pci_dev *pdev)
 	kfree(ishtp_dev);
 }
 
+#ifdef CONFIG_PM
 static struct device *ish_resume_device;
 
 /**
@@ -293,15 +294,14 @@ static int ish_resume(struct device *device)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 static const struct dev_pm_ops ish_pm_ops = {
 	.suspend = ish_suspend,
 	.resume = ish_resume,
 };
 #define ISHTP_ISH_PM_OPS	(&ish_pm_ops)
 #else
 #define ISHTP_ISH_PM_OPS	NULL
-#endif
+#endif /* CONFIG_PM */
 
 static struct pci_driver ish_driver = {
 	.name = KBUILD_MODNAME,

drivers/hid/usbhid/hid-quirks.c

@@ -63,6 +63,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },