Merge branch 'xpcs-phylink_pcs_ops'

Vladimir Oltean says:

====================
Convert xpcs to phylink_pcs_ops

Background: the sja1105 DSA driver currently drives a Designware XPCS
for SGMII and 2500base-X, and it would be nice to reuse some code with
the xpcs module. This would also help consolidate the phylink_pcs_ops,
since the only other dedicated PCS driver, currently, is the lynx_pcs.

Therefore, this series makes the xpcs expose the same kind of API that
the lynx_pcs module does. The main changes are getting rid of struct
mdio_xpcs_ops, being compatible with struct phylink_pcs_ops and being
less reliant on the phy_interface_t passed to xpcs_probe (now renamed to
xpcs_create).

This patch series is partially tested (some code paths have been covered
on the NXP SJA1105 and some others with the help of Vee Khee Wong on
Intel Tiger Lake / stmmac) but further testing on 10G setups would be
appreciated, if possible.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -503,8 +503,7 @@ struct mac_device_info {
 	const struct stmmac_hwtimestamp *ptp;
 	const struct stmmac_tc_ops *tc;
 	const struct stmmac_mmc_ops *mmc;
-	const struct mdio_xpcs_ops *xpcs;
-	struct mdio_xpcs_args xpcs_args;
+	struct mdio_xpcs_args *xpcs;
 	struct mii_regs mii;	/* MII register Addresses */
 	struct mac_link link;
 	void __iomem *pcsr;     /* vpointer to device CSRs */

drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -613,20 +613,6 @@ struct stmmac_mmc_ops {
 #define stmmac_mmc_read(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mmc, read, __args)
 
-/* XPCS callbacks */
-#define stmmac_xpcs_validate(__priv, __args...) \
-	stmmac_do_callback(__priv, xpcs, validate, __args)
-#define stmmac_xpcs_config(__priv, __args...) \
-	stmmac_do_callback(__priv, xpcs, config, __args)
-#define stmmac_xpcs_get_state(__priv, __args...) \
-	stmmac_do_callback(__priv, xpcs, get_state, __args)
-#define stmmac_xpcs_link_up(__priv, __args...) \
-	stmmac_do_callback(__priv, xpcs, link_up, __args)
-#define stmmac_xpcs_probe(__priv, __args...) \
-	stmmac_do_callback(__priv, xpcs, probe, __args)
-#define stmmac_xpcs_config_eee(__priv, __args...) \
-	stmmac_do_callback(__priv, xpcs, config_eee, __args)
-
 struct stmmac_regs_off {
 	u32 ptp_off;
 	u32 mmc_off;

drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c

@@ -720,11 +720,13 @@ static int stmmac_ethtool_op_set_eee(struct net_device *dev,
 		netdev_warn(priv->dev,
 			    "Setting EEE tx-lpi is not supported\n");
 
-	ret = stmmac_xpcs_config_eee(priv, &priv->hw->xpcs_args,
-				     priv->plat->mult_fact_100ns,
-				     edata->eee_enabled);
-	if (ret)
-		return ret;
+	if (priv->hw->xpcs) {
+		ret = xpcs_config_eee(priv->hw->xpcs,
+				      priv->plat->mult_fact_100ns,
+				      edata->eee_enabled);
+		if (ret)
+			return ret;
+	}
 
 	if (!edata->eee_enabled)
 		stmmac_disable_eee_mode(priv);

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -996,29 +996,14 @@ static void stmmac_validate(struct phylink_config *config,
 	linkmode_andnot(state->advertising, state->advertising, mask);
 
 	/* If PCS is supported, check which modes it supports. */
-	stmmac_xpcs_validate(priv, &priv->hw->xpcs_args, supported, state);
-}
-
-static void stmmac_mac_pcs_get_state(struct phylink_config *config,
-				     struct phylink_link_state *state)
-{
-	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
-
-	state->link = 0;
-	stmmac_xpcs_get_state(priv, &priv->hw->xpcs_args, state);
+	if (priv->hw->xpcs)
+		xpcs_validate(priv->hw->xpcs, supported, state);
 }
 
 static void stmmac_mac_config(struct phylink_config *config, unsigned int mode,
 			      const struct phylink_link_state *state)
 {
-	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
-
-	stmmac_xpcs_config(priv, &priv->hw->xpcs_args, state);
-}
-
-static void stmmac_mac_an_restart(struct phylink_config *config)
-{
-	/* Not Supported */
+	/* Nothing to do, xpcs_config() handles everything */
 }
 
 static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
@@ -1060,8 +1045,6 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
 	u32 ctrl;
 
-	stmmac_xpcs_link_up(priv, &priv->hw->xpcs_args, speed, interface);
-
 	ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
 	ctrl &= ~priv->hw->link.speed_mask;
 
@@ -1154,9 +1137,7 @@ static void stmmac_mac_link_up(struct phylink_config *config,
 
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
 	.validate = stmmac_validate,
-	.mac_pcs_get_state = stmmac_mac_pcs_get_state,
 	.mac_config = stmmac_mac_config,
-	.mac_an_restart = stmmac_mac_an_restart,
 	.mac_link_down = stmmac_mac_link_down,
 	.mac_link_up = stmmac_mac_link_up,
 };
@@ -1233,15 +1214,15 @@ static int stmmac_init_phy(struct net_device *dev)
 
 static int stmmac_phy_setup(struct stmmac_priv *priv)
 {
+	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
 	struct fwnode_handle *fwnode = of_fwnode_handle(priv->plat->phylink_node);
 	int mode = priv->plat->phy_interface;
 	struct phylink *phylink;
 
 	priv->phylink_config.dev = &priv->dev->dev;
 	priv->phylink_config.type = PHYLINK_NETDEV;
 	priv->phylink_config.pcs_poll = true;
-	priv->phylink_config.ovr_an_inband =
-		priv->plat->mdio_bus_data->xpcs_an_inband;
+	priv->phylink_config.ovr_an_inband = mdio_bus_data->xpcs_an_inband;
 
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
@@ -1251,6 +1232,12 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 	if (IS_ERR(phylink))
 		return PTR_ERR(phylink);
 
+	if (mdio_bus_data->has_xpcs) {
+		struct mdio_xpcs_args *xpcs = priv->hw->xpcs;
+
+		phylink_set_pcs(phylink, &xpcs->pcs);
+	}
+
 	priv->phylink = phylink;
 	return 0;
 }
@@ -3638,6 +3625,7 @@ static int stmmac_request_irq(struct net_device *dev)
 int stmmac_open(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	int mode = priv->plat->phy_interface;
 	int bfsize = 0;
 	u32 chan;
 	int ret;
@@ -3650,7 +3638,8 @@ int stmmac_open(struct net_device *dev)
 
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI &&
-	    priv->hw->xpcs_args.an_mode != DW_AN_C73) {
+	    (!priv->hw->xpcs ||
+	     xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73)) {
 		ret = stmmac_init_phy(dev);
 		if (ret) {
 			netdev_err(priv->dev,

drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c

@@ -444,14 +444,6 @@ int stmmac_mdio_register(struct net_device *ndev)
 		max_addr = PHY_MAX_ADDR;
 	}
 
-	if (mdio_bus_data->has_xpcs) {
-		priv->hw->xpcs = mdio_xpcs_get_ops();
-		if (!priv->hw->xpcs) {
-			err = -ENODEV;
-			goto bus_register_fail;
-		}
-	}
-
 	if (mdio_bus_data->needs_reset)
 		new_bus->reset = &stmmac_mdio_reset;
 
@@ -510,25 +502,27 @@ int stmmac_mdio_register(struct net_device *ndev)
 	}
 
 	/* Try to probe the XPCS by scanning all addresses. */
-	if (priv->hw->xpcs) {
-		struct mdio_xpcs_args *xpcs = &priv->hw->xpcs_args;
-		int ret, mode = priv->plat->phy_interface;
-		max_addr = PHY_MAX_ADDR;
-
-		xpcs->bus = new_bus;
-
-		found = 0;
-		for (addr = 0; addr < max_addr; addr++) {
-			xpcs->addr = addr;
-
-			ret = stmmac_xpcs_probe(priv, xpcs, mode);
-			if (!ret) {
-				found = 1;
-				break;
+	if (mdio_bus_data->has_xpcs) {
+		int mode = priv->plat->phy_interface;
+		struct mdio_device *mdiodev;
+		struct mdio_xpcs_args *xpcs;
+
+		for (addr = 0; addr < PHY_MAX_ADDR; addr++) {
+			mdiodev = mdio_device_create(new_bus, addr);
+			if (IS_ERR(mdiodev))
+				continue;
+
+			xpcs = xpcs_create(mdiodev, mode);
+			if (IS_ERR_OR_NULL(xpcs)) {
+				mdio_device_free(mdiodev);
+				continue;
 			}
+
+			priv->hw->xpcs = xpcs;
+			break;
 		}
 
-		if (!found && !mdio_node) {
+		if (!priv->hw->xpcs) {
 			dev_warn(dev, "No XPCS found\n");
 			err = -ENODEV;
 			goto no_xpcs_found;
@@ -560,6 +554,11 @@ int stmmac_mdio_unregister(struct net_device *ndev)
 	if (!priv->mii)
 		return 0;
 
+	if (priv->hw->xpcs) {
+		mdio_device_free(priv->hw->xpcs->mdiodev);
+		xpcs_destroy(priv->hw->xpcs);
+	}
+
 	mdiobus_unregister(priv->mii);
 	priv->mii->priv = NULL;
 	mdiobus_free(priv->mii);