Merge tag 'v3.5-rc2' into perf/core

Merge in Linux 3.5-rc2 - to pick up fixes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt

@@ -0,0 +1,93 @@
+Pinctrl-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration
+using the pinctrl device tree bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+Required properties:
+- compatible: i2c-mux-pinctrl
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+  port is connected to.
+
+Also required are:
+
+* Standard pinctrl properties that specify the pin mux state for each child
+  bus. See ../pinctrl/pinctrl-bindings.txt.
+
+* Standard I2C mux properties. See mux.txt in this directory.
+
+* I2C child bus nodes. See mux.txt in this directory.
+
+For each named state defined in the pinctrl-names property, an I2C child bus
+will be created. I2C child bus numbers are assigned based on the index into
+the pinctrl-names property.
+
+The only exception is that no bus will be created for a state named "idle". If
+such a state is defined, it must be the last entry in pinctrl-names. For
+example:
+
+	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+Whenever an access is made to a device on a child bus, the relevant pinctrl
+state will be programmed into hardware.
+
+If an idle state is defined, whenever an access is not being made to a device
+on a child bus, the idle pinctrl state will be programmed into hardware.
+
+If an idle state is not defined, the most recently used pinctrl state will be
+left programmed into hardware whenever no access is being made of a device on
+a child bus.
+
+Example:
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c1>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom {
+				compatible = "eeprom";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom {
+				compatible = "eeprom";
+				reg = <0x50>;
+			};
+		};
+	};
+

MAINTAINERS

@@ -1077,7 +1077,7 @@ F:	drivers/media/video/s5p-fimc/
 ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 M:	Kamil Debski <k.debski@samsung.com>
-M:     Jeongtae Park <jtp.park@samsung.com>
+M:	Jeongtae Park <jtp.park@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org
 L:	linux-media@vger.kernel.org
 S:	Maintained
@@ -1743,10 +1743,10 @@ F:	include/linux/can/platform/
 CAPABILITIES
 M:	Serge Hallyn <serge.hallyn@canonical.com>
 L:	linux-security-module@vger.kernel.org
-S:	Supported	
+S:	Supported
 F:	include/linux/capability.h
 F:	security/capability.c
-F:	security/commoncap.c 
+F:	security/commoncap.c
 F:	kernel/capability.c
 
 CELL BROADBAND ENGINE ARCHITECTURE
@@ -2146,11 +2146,11 @@ S:	Orphan
 F:	drivers/net/wan/pc300*
 
 CYTTSP TOUCHSCREEN DRIVER
-M:      Javier Martinez Canillas <javier@dowhile0.org>
-L:      linux-input@vger.kernel.org
-S:      Maintained
-F:      drivers/input/touchscreen/cyttsp*
-F:      include/linux/input/cyttsp.h
+M:	Javier Martinez Canillas <javier@dowhile0.org>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/touchscreen/cyttsp*
+F:	include/linux/input/cyttsp.h
 
 DAMA SLAVE for AX.25
 M:	Joerg Reuter <jreuter@yaina.de>
@@ -2270,7 +2270,7 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 
 DIOLAN U2C-12 I2C DRIVER
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-diolan-u2c.c
@@ -3145,7 +3145,7 @@ F:	drivers/tty/hvc/
 
 HARDWARE MONITORING
 M:	Jean Delvare <khali@linux-fr.org>
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
@@ -4103,6 +4103,8 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Bryan Wu <bryan.wu@canonical.com>
 M:	Richard Purdie <rpurdie@rpsys.net>
+L:	linux-leds@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
 S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
@@ -4418,6 +4420,13 @@ S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
+MAX16065 HARDWARE MONITOR DRIVER
+M:	Guenter Roeck <linux@roeck-us.net>
+L:	lm-sensors@lm-sensors.org
+S:	Maintained
+F:	Documentation/hwmon/max16065
+F:	drivers/hwmon/max16065.c
+
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
 L:	lm-sensors@lm-sensors.org
@@ -5156,7 +5165,7 @@ F:	drivers/leds/leds-pca9532.c
 F:	include/linux/leds-pca9532.h
 
 PCA9541 I2C BUS MASTER SELECTOR DRIVER
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -5176,7 +5185,7 @@ S:	Maintained
 F:	drivers/firmware/pcdp.*
 
 PCI ERROR RECOVERY
-M:     Linas Vepstas <linasvepstas@gmail.com>
+M:	Linas Vepstas <linasvepstas@gmail.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.txt
@@ -5306,7 +5315,7 @@ F:	drivers/video/fb-puv3.c
 F:	drivers/rtc/rtc-puv3.c
 
 PMBUS HARDWARE MONITORING DRIVERS
-M:	Guenter Roeck <guenter.roeck@ericsson.com>
+M:	Guenter Roeck <linux@roeck-us.net>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.lm-sensors.org/
 W:	http://www.roeck-us.net/linux/drivers/
@@ -7298,11 +7307,11 @@ F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
 F:	include/linux/uio*.h
 
-UTIL-LINUX-NG PACKAGE
+UTIL-LINUX PACKAGE
 M:	Karel Zak <kzak@redhat.com>
-L:	util-linux-ng@vger.kernel.org
-W:	http://kernel.org/~kzak/util-linux-ng/
-T:	git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+L:	util-linux@vger.kernel.org
+W:	http://en.wikipedia.org/wiki/Util-linux
+T:	git git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git
 S:	Maintained
 
 UVESAFB DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -7,7 +7,6 @@ config ARM
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
-	select CMA if (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

arch/arm/mm/dma-mapping.c

@@ -268,10 +268,8 @@ static int __init consistent_init(void)
 	unsigned long base = consistent_base;
 	unsigned long num_ptes = (CONSISTENT_END - base) >> PMD_SHIFT;
 
-#ifndef CONFIG_ARM_DMA_USE_IOMMU
-	if (cpu_architecture() >= CPU_ARCH_ARMv6)
+	if (IS_ENABLED(CONFIG_CMA) && !IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
 		return 0;
-#endif
 
 	consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
 	if (!consistent_pte) {
@@ -342,7 +340,7 @@ static int __init coherent_init(void)
 	struct page *page;
 	void *ptr;
 
-	if (cpu_architecture() < CPU_ARCH_ARMv6)
+	if (!IS_ENABLED(CONFIG_CMA))
 		return 0;
 
 	ptr = __alloc_from_contiguous(NULL, size, prot, &page);
@@ -704,7 +702,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 
 	if (arch_is_coherent() || nommu())
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (cpu_architecture() < CPU_ARCH_ARMv6)
+	else if (!IS_ENABLED(CONFIG_CMA))
 		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);
 	else if (gfp & GFP_ATOMIC)
 		addr = __alloc_from_pool(dev, size, &page, caller);
@@ -773,7 +771,7 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 
 	if (arch_is_coherent() || nommu()) {
 		__dma_free_buffer(page, size);
-	} else if (cpu_architecture() < CPU_ARCH_ARMv6) {
+	} else if (!IS_ENABLED(CONFIG_CMA)) {
 		__dma_free_remap(cpu_addr, size);
 		__dma_free_buffer(page, size);
 	} else {

arch/parisc/Makefile

@@ -21,6 +21,7 @@ KBUILD_DEFCONFIG := default_defconfig
 
 NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
+LIBGCC		= $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
 MACHINE		:= $(shell uname -m)
 ifeq ($(MACHINE),parisc*)
@@ -79,7 +80,7 @@ kernel-y			:= mm/ kernel/ math-emu/
 kernel-$(CONFIG_HPUX)		+= hpux/
 
 core-y	+= $(addprefix arch/parisc/, $(kernel-y))
-libs-y	+= arch/parisc/lib/ `$(CC) -print-libgcc-file-name`
+libs-y	+= arch/parisc/lib/ $(LIBGCC)
 
 drivers-$(CONFIG_OPROFILE)		+= arch/parisc/oprofile/
 

arch/parisc/include/asm/Kbuild

@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
 header-y += pdc.h
+generic-y += word-at-a-time.h

arch/parisc/include/asm/bug.h

@@ -1,6 +1,8 @@
 #ifndef _PARISC_BUG_H
 #define _PARISC_BUG_H
 
+#include <linux/kernel.h>	/* for BUGFLAG_TAINT */
+
 /*
  * Tell the user there is some problem.
  * The offending file and line are encoded in the __bug_table section.

arch/powerpc/kernel/module_32.c

@@ -176,8 +176,8 @@ int module_frob_arch_sections(Elf32_Ehdr *hdr,
 
 static inline int entry_matches(struct ppc_plt_entry *entry, Elf32_Addr val)
 {
-	if (entry->jump[0] == 0x3d600000 + ((val + 0x8000) >> 16)
-	    && entry->jump[1] == 0x396b0000 + (val & 0xffff))
+	if (entry->jump[0] == 0x3d800000 + ((val + 0x8000) >> 16)
+	    && entry->jump[1] == 0x398c0000 + (val & 0xffff))
 		return 1;
 	return 0;
 }
@@ -204,10 +204,9 @@ static uint32_t do_plt_call(void *location,
 		entry++;
 	}
 
-	/* Stolen from Paul Mackerras as well... */
-	entry->jump[0] = 0x3d600000+((val+0x8000)>>16);	/* lis r11,sym@ha */
-	entry->jump[1] = 0x396b0000 + (val&0xffff);	/* addi r11,r11,sym@l*/
-	entry->jump[2] = 0x7d6903a6;			/* mtctr r11 */
+	entry->jump[0] = 0x3d800000+((val+0x8000)>>16); /* lis r12,sym@ha */
+	entry->jump[1] = 0x398c0000 + (val&0xffff);     /* addi r12,r12,sym@l*/
+	entry->jump[2] = 0x7d8903a6;                    /* mtctr r12 */
 	entry->jump[3] = 0x4e800420;			/* bctr */
 
 	DEBUGP("Initialized plt for 0x%x at %p\n", val, entry);

arch/powerpc/kernel/time.c

@@ -475,6 +475,7 @@ void timer_interrupt(struct pt_regs * regs)
 	struct pt_regs *old_regs;
 	u64 *next_tb = &__get_cpu_var(decrementers_next_tb);
 	struct clock_event_device *evt = &__get_cpu_var(decrementers);
+	u64 now;
 
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continue to take decrementer exceptions.
@@ -509,9 +510,16 @@ void timer_interrupt(struct pt_regs * regs)
 		irq_work_run();
 	}
 
-	*next_tb = ~(u64)0;
-	if (evt->event_handler)
-		evt->event_handler(evt);
+	now = get_tb_or_rtc();
+	if (now >= *next_tb) {
+		*next_tb = ~(u64)0;
+		if (evt->event_handler)
+			evt->event_handler(evt);
+	} else {
+		now = *next_tb - now;
+		if (now <= DECREMENTER_MAX)
+			set_dec((int)now);
+	}
 
 #ifdef CONFIG_PPC64
 	/* collect purr register values often, for accurate calculations */

arch/tile/include/asm/thread_info.h

@@ -91,11 +91,6 @@ extern void smp_nap(void);
 /* Enable interrupts racelessly and nap forever: helper for cpu_idle(). */
 extern void _cpu_idle(void);
 
-/* Switch boot idle thread to a freshly-allocated stack and free old stack. */
-extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
-				  unsigned long new_sp,
-				  unsigned long new_ss10);
-
 #else /* __ASSEMBLY__ */
 
 /*

arch/tile/kernel/entry.S

@@ -68,20 +68,6 @@ STD_ENTRY(KBacktraceIterator_init_current)
 	jrp lr   /* keep backtracer happy */
 	STD_ENDPROC(KBacktraceIterator_init_current)
 
-/*
- * Reset our stack to r1/r2 (sp and ksp0+cpu respectively), then
- * free the old stack (passed in r0) and re-invoke cpu_idle().
- * We update sp and ksp0 simultaneously to avoid backtracer warnings.
- */
-STD_ENTRY(cpu_idle_on_new_stack)
-	{
-	 move sp, r1
-	 mtspr SPR_SYSTEM_SAVE_K_0, r2
-	}
-	jal free_thread_info
-	j cpu_idle
-	STD_ENDPROC(cpu_idle_on_new_stack)
-
 /* Loop forever on a nap during SMP boot. */
 STD_ENTRY(smp_nap)
 	nap

arch/tile/kernel/setup.c

@@ -29,6 +29,7 @@
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/hugetlb.h>
+#include <linux/start_kernel.h>
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/cacheflush.h>