Merge branches 'clk-aspeed', 'clk-lock-UP', 'clk-mediatek' and 'clk-a…

…llwinner' into clk-next

* clk-aspeed:
  clk: aspeed: Handle inverse polarity of USB port 1 clock gate
  clk: aspeed: Fix return value check in aspeed_cc_init()
  clk: aspeed: Add reset controller
  clk: aspeed: Register gated clocks
  clk: aspeed: Add platform driver and register PLLs
  clk: aspeed: Register core clocks
  clk: Add clock driver for ASPEED BMC SoCs
  dt-bindings: clock: Add ASPEED constants

* clk-lock-UP:
  clk: fix reentrancy of clk_enable() on UP systems

* clk-mediatek:
  clk: mediatek: adjust dependency of reset.c to avoid unexpectedly being built
  clk: mediatek: Fix all warnings for missing struct clk_onecell_data
  clk: mediatek: fixup test-building of MediaTek clock drivers
  clk: mediatek: group drivers under indpendent menu

* clk-allwinner:
  clk: sunxi-ng: a83t: Add M divider to TCON1 clock
  clk: sunxi-ng: fix the A64/H5 clock description of DE2 CCU
  clk: sunxi-ng: add support for Allwinner H3 DE2 CCU
  dt-bindings: fix the binding of Allwinner DE2 CCU of A83T and H3
  clk: sunxi-ng: sun8i: a83t: Use sigma-delta modulation for audio PLL
  clk: sunxi-ng: sun8i: a83t: Add /2 fixed post divider to audio PLL
  clk: sunxi-ng: Support fixed post-dividers on NM style clocks
  clk: sunxi-ng: sun50i: a64: Add 2x fixed post-divider to MMC module clocks
  clk: sunxi-ng: Support fixed post-dividers on MP style clocks
  clk: sunxi: Use PTR_ERR_OR_ZERO()

Documentation/devicetree/bindings/clock/sun8i-de2.txt

@@ -4,13 +4,14 @@ Allwinner Display Engine 2.0 Clock Control Binding
 Required properties :
 - compatible: must contain one of the following compatibles:
 		- "allwinner,sun8i-a83t-de2-clk"
+		- "allwinner,sun8i-h3-de2-clk"
 		- "allwinner,sun8i-v3s-de2-clk"
 		- "allwinner,sun50i-h5-de2-clk"
 
 - reg: Must contain the registers base address and length
 - clocks: phandle to the clocks feeding the display engine subsystem.
 	  Three are needed:
-  - "mod": the display engine module clock
+  - "mod": the display engine module clock (on A83T it's the DE PLL)
   - "bus": the bus clock for the whole display engine subsystem
 - clock-names: Must contain the clock names described just above
 - resets: phandle to the reset control for the display engine subsystem.
@@ -19,7 +20,7 @@ Required properties :
 
 Example:
 de2_clocks: clock@1000000 {
-	compatible = "allwinner,sun8i-a83t-de2-clk";
+	compatible = "allwinner,sun8i-h3-de2-clk";
 	reg = <0x01000000 0x100000>;
 	clocks = <&ccu CLK_BUS_DE>,
 		 <&ccu CLK_DE>;

drivers/clk/Kconfig

@@ -142,6 +142,18 @@ config COMMON_CLK_GEMINI
 	  This driver supports the SoC clocks on the Cortina Systems Gemini
 	  platform, also known as SL3516 or CS3516.
 
+config COMMON_CLK_ASPEED
+	bool "Clock driver for Aspeed BMC SoCs"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	default ARCH_ASPEED
+	select MFD_SYSCON
+	select RESET_CONTROLLER
+	---help---
+	  This driver supports the SoC clocks on the Aspeed BMC platforms.
+
+	  The G4 and G5 series, including the ast2400 and ast2500, are supported
+	  by this driver.
+
 config COMMON_CLK_S2MPS11
 	tristate "Clock driver for S2MPS1X/S5M8767 MFD"
 	depends on MFD_SEC_CORE || COMPILE_TEST

drivers/clk/Makefile

@@ -27,6 +27,7 @@ obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
+obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
@@ -67,7 +68,7 @@ obj-$(CONFIG_ARCH_MXC)			+= imx/
 obj-$(CONFIG_MACH_INGENIC)		+= ingenic/
 obj-$(CONFIG_ARCH_KEYSTONE)		+= keystone/
 obj-$(CONFIG_MACH_LOONGSON32)		+= loongson1/
-obj-$(CONFIG_ARCH_MEDIATEK)		+= mediatek/
+obj-y					+= mediatek/
 obj-$(CONFIG_COMMON_CLK_AMLOGIC)	+= meson/
 obj-$(CONFIG_MACH_PIC32)		+= microchip/
 ifeq ($(CONFIG_COMMON_CLK), y)