Altera TSE: Add missing phydev

Altera network device doesn't come up after

ifconfig eth0 down
ifconfig eth0 up

The reason behind is clearing priv->phydev during tse_shutdown().
The phydev is not restored back at tse_open().

Resubmiting as to follow Tobias Klauser suggestion.
phy_start/phy_stop are called on each ifup/ifdown and
phy_disconnect is called once during the module removal.

Signed-off-by: Kostya Belezko <bkostya@hotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/altera/altera_tse_main.c

@@ -1170,10 +1170,6 @@ static int tse_open(struct net_device *dev)
 init_error:
 	free_skbufs(dev);
 alloc_skbuf_error:
-	if (priv->phydev) {
-		phy_disconnect(priv->phydev);
-		priv->phydev = NULL;
-	}
 phy_error:
 	return ret;
 }
@@ -1186,12 +1182,9 @@ static int tse_shutdown(struct net_device *dev)
 	int ret;
 	unsigned long int flags;
 
-	/* Stop and disconnect the PHY */
-	if (priv->phydev) {
+	/* Stop the PHY */
+	if (priv->phydev)
 		phy_stop(priv->phydev);
-		phy_disconnect(priv->phydev);
-		priv->phydev = NULL;
-	}
 
 	netif_stop_queue(dev);
 	napi_disable(&priv->napi);
@@ -1525,6 +1518,10 @@ static int altera_tse_probe(struct platform_device *pdev)
 static int altera_tse_remove(struct platform_device *pdev)
 {
 	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct altera_tse_private *priv = netdev_priv(ndev);
+
+	if (priv->phydev)
+		phy_disconnect(priv->phydev);
 
 	platform_set_drvdata(pdev, NULL);
 	altera_tse_mdio_destroy(ndev);