mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()

Two helpers have been added to the core to do all kind of controller
side configuration/initialization between the detection phase and the
final NAND scan. Implement these hooks so that we can convert the driver
to just use nand_scan() instead of the nand_scan_ident() +
nand_scan_tail() pair.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drivers/mtd/nand/raw/lpc32xx_mlc.c

@@ -184,6 +184,7 @@ static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = {
 };
 
 struct lpc32xx_nand_host {
+	struct platform_device	*pdev;
 	struct nand_chip	nand_chip;
 	struct lpc32xx_mlc_platform_data *pdata;
 	struct clk		*clk;
@@ -653,6 +654,32 @@ static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
 	return ncfg;
 }
 
+static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct lpc32xx_nand_host *host = nand_get_controller_data(chip);
+	struct device *dev = &host->pdev->dev;
+
+	host->dma_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL);
+	if (!host->dma_buf)
+		return -ENOMEM;
+
+	host->dummy_buf = devm_kzalloc(dev, mtd->writesize, GFP_KERNEL);
+	if (!host->dummy_buf)
+		return -ENOMEM;
+
+	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.size = 512;
+	mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
+	host->mlcsubpages = mtd->writesize / 512;
+
+	return 0;
+}
+
+static const struct nand_controller_ops lpc32xx_nand_controller_ops = {
+	.attach_chip = lpc32xx_nand_attach_chip,
+};
+
 /*
  * Probe for NAND controller
  */
@@ -669,6 +696,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	if (!host)
 		return -ENOMEM;
 
+	host->pdev = pdev;
+
 	rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	host->io_base = devm_ioremap_resource(&pdev->dev, rc);
 	if (IS_ERR(host->io_base))
@@ -748,31 +777,6 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 		}
 	}
 
-	/*
-	 * Scan to find existance of the device and
-	 * Get the type of NAND device SMALL block or LARGE block
-	 */
-	res = nand_scan_ident(mtd, 1, NULL);
-	if (res)
-		goto release_dma_chan;
-
-	host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
-	if (!host->dma_buf) {
-		res = -ENOMEM;
-		goto release_dma_chan;
-	}
-
-	host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
-	if (!host->dummy_buf) {
-		res = -ENOMEM;
-		goto release_dma_chan;
-	}
-
-	nand_chip->ecc.mode = NAND_ECC_HW;
-	nand_chip->ecc.size = 512;
-	mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
-	host->mlcsubpages = mtd->writesize / 512;
-
 	/* initially clear interrupt status */
 	readb(MLC_IRQ_SR(host->io_base));
 
@@ -794,10 +798,11 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	}
 
 	/*
-	 * Fills out all the uninitialized function pointers with the defaults
-	 * And scans for a bad block table if appropriate.
+	 * Scan to find existence of the device and get the type of NAND device:
+	 * SMALL block or LARGE block.
 	 */
-	res = nand_scan_tail(mtd);
+	nand_chip->dummy_controller.ops = &lpc32xx_nand_controller_ops;
+	res = nand_scan(mtd, 1);
 	if (res)
 		goto free_irq;