Merge branch 'for-5.17/hidraw' into for-linus

- locking performance improvement for hidraw code (André Almeida)

Documentation/admin-guide/blockdev/drbd/figures.rst

@@ -25,6 +25,6 @@ Sub graphs of DRBD's state transitions
     :alt:   disk-states-8.dot
     :align: center
 
-.. kernel-figure:: node-states-8.dot
-    :alt:   node-states-8.dot
+.. kernel-figure:: peer-states-8.dot
+    :alt:   peer-states-8.dot
     :align: center

Documentation/admin-guide/blockdev/drbd/node-states-8.dot → Documentation/admin-guide/blockdev/drbd/peer-states-8.dot

@@ -1,8 +1,3 @@
-digraph node_states {
-	Secondary -> Primary           [ label = "ioctl_set_state()" ]
-	Primary   -> Secondary 	       [ label = "ioctl_set_state()" ]
-}
-
 digraph peer_states {
 	Secondary -> Primary           [ label = "recv state packet" ]
 	Primary   -> Secondary 	       [ label = "recv state packet" ]

Documentation/arm64/pointer-authentication.rst

@@ -53,11 +53,10 @@ The number of bits that the PAC occupies in a pointer is 55 minus the
 virtual address size configured by the kernel. For example, with a
 virtual address size of 48, the PAC is 7 bits wide.
 
-Recent versions of GCC can compile code with APIAKey-based return
-address protection when passed the -msign-return-address option. This
-uses instructions in the HINT space (unless -march=armv8.3-a or higher
-is also passed), and such code can run on systems without the pointer
-authentication extension.
+When ARM64_PTR_AUTH_KERNEL is selected, the kernel will be compiled
+with HINT space pointer authentication instructions protecting
+function returns. Kernels built with this option will work on hardware
+with or without pointer authentication support.
 
 In addition to exec(), keys can also be reinitialized to random values
 using the PR_PAC_RESET_KEYS prctl. A bitmask of PR_PAC_APIAKEY,

Documentation/conf.py

@@ -249,11 +249,16 @@
 
 html_static_path = ['sphinx-static']
 
-html_context = {
-    'css_files': [
-        '_static/theme_overrides.css',
-    ],
-}
+html_css_files = [
+    'theme_overrides.css',
+]
+
+if major <= 1 and minor < 8:
+    html_context = {
+        'css_files': [
+            '_static/theme_overrides.css',
+        ],
+    }
 
 # Add any extra paths that contain custom files (such as robots.txt or
 # .htaccess) here, relative to this directory. These files are copied

Documentation/cpu-freq/core.rst

@@ -73,12 +73,12 @@ CPUFREQ_POSTCHANGE.
 The third argument is a struct cpufreq_freqs with the following
 values:
 
-=====	===========================
-cpu	number of the affected CPU
+======	======================================
+policy	a pointer to the struct cpufreq_policy
 old	old frequency
 new	new frequency
 flags	flags of the cpufreq driver
-=====	===========================
+======	======================================
 
 3. CPUFreq Table Generation with Operating Performance Point (OPP)
 ==================================================================

Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml

@@ -17,9 +17,10 @@ properties:
     oneOf:
       - enum:
           - fsl,imx7ulp-lpi2c
-          - fsl,imx8qm-lpi2c
       - items:
-          - const: fsl,imx8qxp-lpi2c
+          - enum:
+              - fsl,imx8qxp-lpi2c
+              - fsl,imx8qm-lpi2c
           - const: fsl,imx7ulp-lpi2c
 
   reg:

Documentation/devicetree/bindings/spi/spi-rockchip.yaml

@@ -33,6 +33,7 @@ properties:
               - rockchip,rk3328-spi
               - rockchip,rk3368-spi
               - rockchip,rk3399-spi
+              - rockchip,rk3568-spi
               - rockchip,rv1126-spi
           - const: rockchip,rk3066-spi
 

Documentation/filesystems/cifs/ksmbd.rst

@@ -50,11 +50,11 @@ ksmbd.mountd (user space daemon)
 --------------------------------
 
 ksmbd.mountd is userspace process to, transfer user account and password that
-are registered using ksmbd.adduser(part of utils for user space). Further it
+are registered using ksmbd.adduser (part of utils for user space). Further it
 allows sharing information parameters that parsed from smb.conf to ksmbd in
 kernel. For the execution part it has a daemon which is continuously running
 and connected to the kernel interface using netlink socket, it waits for the
-requests(dcerpc and share/user info). It handles RPC calls (at a minimum few
+requests (dcerpc and share/user info). It handles RPC calls (at a minimum few
 dozen) that are most important for file server from NetShareEnum and
 NetServerGetInfo. Complete DCE/RPC response is prepared from the user space
 and passed over to the associated kernel thread for the client.
@@ -154,11 +154,11 @@ Each layer
 1. Enable all component prints
 	# sudo ksmbd.control -d "all"
 
-2. Enable one of components(smb, auth, vfs, oplock, ipc, conn, rdma)
+2. Enable one of components (smb, auth, vfs, oplock, ipc, conn, rdma)
 	# sudo ksmbd.control -d "smb"
 
-3. Show what prints are enable.
-	# cat/sys/class/ksmbd-control/debug
+3. Show what prints are enabled.
+	# cat /sys/class/ksmbd-control/debug
 	  [smb] auth vfs oplock ipc conn [rdma]
 
 4. Disable prints:

Documentation/filesystems/netfs_library.rst

@@ -1,7 +1,7 @@
 .. SPDX-License-Identifier: GPL-2.0
 
 =================================
-NETWORK FILESYSTEM HELPER LIBRARY
+Network Filesystem Helper Library
 =================================
 
 .. Contents:
@@ -37,22 +37,22 @@ into a common call framework.
 
 The following services are provided:
 
- * Handles transparent huge pages (THPs).
+ * Handle folios that span multiple pages.
 
- * Insulates the netfs from VM interface changes.
+ * Insulate the netfs from VM interface changes.
 
- * Allows the netfs to arbitrarily split reads up into pieces, even ones that
-   don't match page sizes or page alignments and that may cross pages.
+ * Allow the netfs to arbitrarily split reads up into pieces, even ones that
+   don't match folio sizes or folio alignments and that may cross folios.
 
- * Allows the netfs to expand a readahead request in both directions to meet
-   its needs.
+ * Allow the netfs to expand a readahead request in both directions to meet its
+   needs.
 
- * Allows the netfs to partially fulfil a read, which will then be resubmitted.
+ * Allow the netfs to partially fulfil a read, which will then be resubmitted.
 
- * Handles local caching, allowing cached data and server-read data to be
+ * Handle local caching, allowing cached data and server-read data to be
    interleaved for a single request.
 
- * Handles clearing of bufferage that aren't on the server.
+ * Handle clearing of bufferage that aren't on the server.
 
  * Handle retrying of reads that failed, switching reads from the cache to the
    server as necessary.
@@ -70,22 +70,22 @@ Read Helper Functions
 
 Three read helpers are provided::
 
- * void netfs_readahead(struct readahead_control *ractl,
-			const struct netfs_read_request_ops *ops,
-			void *netfs_priv);``
- * int netfs_readpage(struct file *file,
-		      struct page *page,
-		      const struct netfs_read_request_ops *ops,
-		      void *netfs_priv);
- * int netfs_write_begin(struct file *file,
-			 struct address_space *mapping,
-			 loff_t pos,
-			 unsigned int len,
-			 unsigned int flags,
-			 struct page **_page,
-			 void **_fsdata,
-			 const struct netfs_read_request_ops *ops,
-			 void *netfs_priv);
+	void netfs_readahead(struct readahead_control *ractl,
+			     const struct netfs_read_request_ops *ops,
+			     void *netfs_priv);
+	int netfs_readpage(struct file *file,
+			   struct folio *folio,
+			   const struct netfs_read_request_ops *ops,
+			   void *netfs_priv);
+	int netfs_write_begin(struct file *file,
+			      struct address_space *mapping,
+			      loff_t pos,
+			      unsigned int len,
+			      unsigned int flags,
+			      struct folio **_folio,
+			      void **_fsdata,
+			      const struct netfs_read_request_ops *ops,
+			      void *netfs_priv);
 
 Each corresponds to a VM operation, with the addition of a couple of parameters
 for the use of the read helpers:
@@ -103,8 +103,8 @@ Both of these values will be stored into the read request structure.
 For ->readahead() and ->readpage(), the network filesystem should just jump
 into the corresponding read helper; whereas for ->write_begin(), it may be a
 little more complicated as the network filesystem might want to flush
-conflicting writes or track dirty data and needs to put the acquired page if an
-error occurs after calling the helper.
+conflicting writes or track dirty data and needs to put the acquired folio if
+an error occurs after calling the helper.
 
 The helpers manage the read request, calling back into the network filesystem
 through the suppplied table of operations.  Waits will be performed as
@@ -253,7 +253,7 @@ through which it can issue requests and negotiate::
 		void (*issue_op)(struct netfs_read_subrequest *subreq);
 		bool (*is_still_valid)(struct netfs_read_request *rreq);
 		int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
-					 struct page *page, void **_fsdata);
+					 struct folio *folio, void **_fsdata);
 		void (*done)(struct netfs_read_request *rreq);
 		void (*cleanup)(struct address_space *mapping, void *netfs_priv);
 	};
@@ -313,13 +313,14 @@ The operations are as follows:
 
    There is no return value; the netfs_subreq_terminated() function should be
    called to indicate whether or not the operation succeeded and how much data
-   it transferred.  The filesystem also should not deal with setting pages
+   it transferred.  The filesystem also should not deal with setting folios
    uptodate, unlocking them or dropping their refs - the helpers need to deal
    with this as they have to coordinate with copying to the local cache.
 
-   Note that the helpers have the pages locked, but not pinned.  It is possible
-   to use the ITER_XARRAY iov iterator to refer to the range of the inode that
-   is being operated upon without the need to allocate large bvec tables.
+   Note that the helpers have the folios locked, but not pinned.  It is
+   possible to use the ITER_XARRAY iov iterator to refer to the range of the
+   inode that is being operated upon without the need to allocate large bvec
+   tables.
 
  * ``is_still_valid()``
 
@@ -330,15 +331,15 @@ The operations are as follows:
  * ``check_write_begin()``
 
    [Optional] This is called from the netfs_write_begin() helper once it has
-   allocated/grabbed the page to be modified to allow the filesystem to flush
+   allocated/grabbed the folio to be modified to allow the filesystem to flush
    conflicting state before allowing it to be modified.
 
-   It should return 0 if everything is now fine, -EAGAIN if the page should be
+   It should return 0 if everything is now fine, -EAGAIN if the folio should be
    regrabbed and any other error code to abort the operation.
 
  * ``done``
 
-   [Optional] This is called after the pages in the request have all been
+   [Optional] This is called after the folios in the request have all been
    unlocked (and marked uptodate if applicable).
 
  * ``cleanup``
@@ -390,19 +391,19 @@ The read helpers work by the following general procedure:
      * If NETFS_SREQ_CLEAR_TAIL was set, a short read will be cleared to the
        end of the slice instead of reissuing.
 
- * Once the data is read, the pages that have been fully read/cleared:
+ * Once the data is read, the folios that have been fully read/cleared:
 
    * Will be marked uptodate.
 
    * If a cache is present, will be marked with PG_fscache.
 
    * Unlocked
 
- * Any pages that need writing to the cache will then have DIO writes issued.
+ * Any folios that need writing to the cache will then have DIO writes issued.
 
  * Synchronous operations will wait for reading to be complete.
 
- * Writes to the cache will proceed asynchronously and the pages will have the
+ * Writes to the cache will proceed asynchronously and the folios will have the
    PG_fscache mark removed when that completes.
 
  * The request structures will be cleaned up when everything has completed.
@@ -452,6 +453,9 @@ operation table looks like the following::
 			    netfs_io_terminated_t term_func,
 			    void *term_func_priv);
 
+		int (*prepare_write)(struct netfs_cache_resources *cres,
+				     loff_t *_start, size_t *_len, loff_t i_size);
+
 		int (*write)(struct netfs_cache_resources *cres,
 			     loff_t start_pos,
 			     struct iov_iter *iter,
@@ -509,6 +513,14 @@ The methods defined in the table are:
    indicating whether the termination is definitely happening in the caller's
    context.
 
+ * ``prepare_write()``
+
+   [Required] Called to adjust a write to the cache and check that there is
+   sufficient space in the cache.  The start and length values indicate the
+   size of the write that netfslib is proposing, and this can be adjusted by
+   the cache to respect DIO boundaries.  The file size is passed for
+   information.
+
  * ``write()``
 
    [Required] Called to write to the cache.  The start file offset is given
@@ -525,4 +537,9 @@ not the read request structure as they could be used in other situations where
 there isn't a read request structure as well, such as writing dirty data to the
 cache.
 
+
+API Function Reference
+======================
+
 .. kernel-doc:: include/linux/netfs.h
+.. kernel-doc:: fs/netfs/read_helper.c

Documentation/i2c/smbus-protocol.rst

@@ -36,6 +36,8 @@ Key to symbols
 
 =============== =============================================================
 S               Start condition
+Sr              Repeated start condition, used to switch from write to
+                read mode.
 P               Stop condition
 Rd/Wr (1 bit)   Read/Write bit. Rd equals 1, Wr equals 0.
 A, NA (1 bit)   Acknowledge (ACK) and Not Acknowledge (NACK) bit
@@ -100,7 +102,7 @@ Implemented by i2c_smbus_read_byte_data()
 This reads a single byte from a device, from a designated register.
 The register is specified through the Comm byte::
 
-  S Addr Wr [A] Comm [A] S Addr Rd [A] [Data] NA P
+  S Addr Wr [A] Comm [A] Sr Addr Rd [A] [Data] NA P
 
 Functionality flag: I2C_FUNC_SMBUS_READ_BYTE_DATA
 
@@ -114,7 +116,7 @@ This operation is very like Read Byte; again, data is read from a
 device, from a designated register that is specified through the Comm
 byte. But this time, the data is a complete word (16 bits)::
 
-  S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
+  S Addr Wr [A] Comm [A] Sr Addr Rd [A] [DataLow] A [DataHigh] NA P
 
 Functionality flag: I2C_FUNC_SMBUS_READ_WORD_DATA
 
@@ -164,7 +166,7 @@ This command selects a device register (through the Comm byte), sends
 16 bits of data to it, and reads 16 bits of data in return::
 
   S Addr Wr [A] Comm [A] DataLow [A] DataHigh [A]
-                               S Addr Rd [A] [DataLow] A [DataHigh] NA P
+                              Sr Addr Rd [A] [DataLow] A [DataHigh] NA P
 
 Functionality flag: I2C_FUNC_SMBUS_PROC_CALL
 
@@ -181,7 +183,7 @@ of data is specified by the device in the Count byte.
 ::
 
   S Addr Wr [A] Comm [A]
-             S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
+            Sr Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P
 
 Functionality flag: I2C_FUNC_SMBUS_READ_BLOCK_DATA
 
@@ -212,7 +214,7 @@ This command selects a device register (through the Comm byte), sends
 1 to 31 bytes of data to it, and reads 1 to 31 bytes of data in return::
 
   S Addr Wr [A] Comm [A] Count [A] Data [A] ...
-                               S Addr Rd [A] [Count] A [Data] ... A P
+                              Sr Addr Rd [A] [Count] A [Data] ... A P
 
 Functionality flag: I2C_FUNC_SMBUS_BLOCK_PROC_CALL
 
@@ -300,7 +302,7 @@ This command reads a block of bytes from a device, from a
 designated register that is specified through the Comm byte::
 
   S Addr Wr [A] Comm [A]
-             S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
+            Sr Addr Rd [A] [Data] A [Data] A ... A [Data] NA P
 
 Functionality flag: I2C_FUNC_SMBUS_READ_I2C_BLOCK
 

Documentation/networking/ipvs-sysctl.rst

@@ -37,8 +37,7 @@ conn_reuse_mode - INTEGER
 
 	0: disable any special handling on port reuse. The new
 	connection will be delivered to the same real server that was
-	servicing the previous connection. This will effectively
-	disable expire_nodest_conn.
+	servicing the previous connection.
 
 	bit 1: enable rescheduling of new connections when it is safe.
 	That is, whenever expire_nodest_conn and for TCP sockets, when