Merge branches 'cleanup-part3', 'voltage', 'dmtimer' and 'l3' into dt…

…-base

arch/arm/include/asm/device.h

@@ -12,7 +12,12 @@ struct dev_archdata {
 #endif
 };
 
+struct omap_device;
+
 struct pdev_archdata {
+#ifdef CONFIG_ARCH_OMAP
+	struct omap_device *od;
+#endif
 };
 
 #endif

arch/arm/mach-omap1/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 

arch/arm/mach-omap1/mcbsp.c

@@ -31,6 +31,7 @@
 static int dsp_use;
 static struct clk *api_clk;
 static struct clk *dsp_clk;
+static struct platform_device **omap_mcbsp_devices;
 
 static void omap1_mcbsp_request(unsigned int id)
 {
@@ -78,6 +79,17 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 	.free		= omap1_mcbsp_free,
 };
 
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 struct resource omap7xx_mcbsp_res[][6] = {
 	{
@@ -369,6 +381,39 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 #define OMAP16XX_MCBSP_COUNT		0
 #endif
 
+static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+			struct omap_mcbsp_platform_data *config, int size)
+{
+	int i;
+
+	omap_mcbsp_devices = kzalloc(size * sizeof(struct platform_device *),
+				     GFP_KERNEL);
+	if (!omap_mcbsp_devices) {
+		printk(KERN_ERR "Could not register McBSP devices\n");
+		return;
+	}
+
+	for (i = 0; i < size; i++) {
+		struct platform_device *new_mcbsp;
+		int ret;
+
+		new_mcbsp = platform_device_alloc("omap-mcbsp", i + 1);
+		if (!new_mcbsp)
+			continue;
+		platform_device_add_resources(new_mcbsp, &res[i * res_count],
+					res_count);
+		config[i].reg_size = 2;
+		config[i].reg_step = 2;
+		new_mcbsp->dev.platform_data = &config[i];
+		ret = platform_device_add(new_mcbsp);
+		if (ret) {
+			platform_device_put(new_mcbsp);
+			continue;
+		}
+		omap_mcbsp_devices[i] = new_mcbsp;
+	}
+}
+
 static int __init omap1_mcbsp_init(void)
 {
 	if (!cpu_class_is_omap1())

arch/arm/mach-omap1/timer.c

@@ -0,0 +1,173 @@
+/**
+ * OMAP1 Dual-Mode Timers - platform device registration
+ *
+ * Contains first level initialization routines which internally
+ * generates timer device information and registers with linux
+ * device model. It also has low level function to chnage the timer
+ * input clock source.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Tarun Kanti DebBarma <tarun.kanti@ti.com>
+ * Thara Gopinath <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+
+#include <plat/dmtimer.h>
+
+#define OMAP1610_GPTIMER1_BASE		0xfffb1400
+#define OMAP1610_GPTIMER2_BASE		0xfffb1c00
+#define OMAP1610_GPTIMER3_BASE		0xfffb2400
+#define OMAP1610_GPTIMER4_BASE		0xfffb2c00
+#define OMAP1610_GPTIMER5_BASE		0xfffb3400
+#define OMAP1610_GPTIMER6_BASE		0xfffb3c00
+#define OMAP1610_GPTIMER7_BASE		0xfffb7400
+#define OMAP1610_GPTIMER8_BASE		0xfffbd400
+
+#define OMAP1_DM_TIMER_COUNT		8
+
+static int omap1_dm_timer_set_src(struct platform_device *pdev,
+				int source)
+{
+	int n = (pdev->id - 1) << 1;
+	u32 l;
+
+	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l |= source << n;
+	__raw_writel(l, MOD_CONF_CTRL_1);
+
+	return 0;
+}
+
+
+int __init omap1_dm_timer_init(void)
+{
+	int i;
+	int ret;
+	struct dmtimer_platform_data *pdata;
+	struct platform_device *pdev;
+
+	if (!cpu_is_omap16xx())
+		return 0;
+
+	for (i = 1; i <= OMAP1_DM_TIMER_COUNT; i++) {
+		struct resource res[2];
+		u32 base, irq;
+
+		switch (i) {
+		case 1:
+			base = OMAP1610_GPTIMER1_BASE;
+			irq = INT_1610_GPTIMER1;
+			break;
+		case 2:
+			base = OMAP1610_GPTIMER2_BASE;
+			irq = INT_1610_GPTIMER2;
+			break;
+		case 3:
+			base = OMAP1610_GPTIMER3_BASE;
+			irq = INT_1610_GPTIMER3;
+			break;
+		case 4:
+			base = OMAP1610_GPTIMER4_BASE;
+			irq = INT_1610_GPTIMER4;
+			break;
+		case 5:
+			base = OMAP1610_GPTIMER5_BASE;
+			irq = INT_1610_GPTIMER5;
+			break;
+		case 6:
+			base = OMAP1610_GPTIMER6_BASE;
+			irq = INT_1610_GPTIMER6;
+			break;
+		case 7:
+			base = OMAP1610_GPTIMER7_BASE;
+			irq = INT_1610_GPTIMER7;
+			break;
+		case 8:
+			base = OMAP1610_GPTIMER8_BASE;
+			irq = INT_1610_GPTIMER8;
+			break;
+		default:
+			/*
+			 * not supposed to reach here.
+			 * this is to remove warning.
+			 */
+			return -EINVAL;
+		}
+
+		pdev = platform_device_alloc("omap_timer", i);
+		if (!pdev) {
+			pr_err("%s: Failed to device alloc for dmtimer%d\n",
+				__func__, i);
+			return -ENOMEM;
+		}
+
+		memset(res, 0, 2 * sizeof(struct resource));
+		res[0].start = base;
+		res[0].end = base + 0x46;
+		res[0].flags = IORESOURCE_MEM;
+		res[1].start = irq;
+		res[1].end = irq;
+		res[1].flags = IORESOURCE_IRQ;
+		ret = platform_device_add_resources(pdev, res,
+				ARRAY_SIZE(res));
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add resources.\n",
+				__func__);
+			goto err_free_pdev;
+		}
+
+		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+		if (!pdata) {
+			dev_err(&pdev->dev, "%s: Failed to allocate pdata.\n",
+				__func__);
+			ret = -ENOMEM;
+			goto err_free_pdata;
+		}
+
+		pdata->set_timer_src = omap1_dm_timer_set_src;
+		pdata->needs_manual_reset = 1;
+
+		ret = platform_device_add_data(pdev, pdata, sizeof(*pdata));
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add platform data.\n",
+				__func__);
+			goto err_free_pdata;
+		}
+
+		ret = platform_device_add(pdev);
+		if (ret) {
+			dev_err(&pdev->dev, "%s: Failed to add platform device.\n",
+				__func__);
+			goto err_free_pdata;
+		}
+
+		dev_dbg(&pdev->dev, " Registered.\n");
+	}
+
+	return 0;
+
+err_free_pdata:
+	kfree(pdata);
+
+err_free_pdev:
+	platform_device_unregister(pdev);
+
+	return ret;
+}
+arch_initcall(omap1_dm_timer_init);