Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

arch/x86/net/bpf_jit_comp.c

@@ -151,17 +151,18 @@ void bpf_jit_compile(struct sk_filter *fp)
 	cleanup_addr = proglen; /* epilogue address */
 
 	for (pass = 0; pass < 10; pass++) {
+		u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen;
 		/* no prologue/epilogue for trivial filters (RET something) */
 		proglen = 0;
 		prog = temp;
 
-		if (seen) {
+		if (seen_or_pass0) {
 			EMIT4(0x55, 0x48, 0x89, 0xe5); /* push %rbp; mov %rsp,%rbp */
 			EMIT4(0x48, 0x83, 0xec, 96);	/* subq  $96,%rsp	*/
 			/* note : must save %rbx in case bpf_error is hit */
-			if (seen & (SEEN_XREG | SEEN_DATAREF))
+			if (seen_or_pass0 & (SEEN_XREG | SEEN_DATAREF))
 				EMIT4(0x48, 0x89, 0x5d, 0xf8); /* mov %rbx, -8(%rbp) */
-			if (seen & SEEN_XREG)
+			if (seen_or_pass0 & SEEN_XREG)
 				CLEAR_X(); /* make sure we dont leek kernel memory */
 
 			/*
@@ -170,7 +171,7 @@ void bpf_jit_compile(struct sk_filter *fp)
 			 *  r9 = skb->len - skb->data_len
 			 *  r8 = skb->data
 			 */
-			if (seen & SEEN_DATAREF) {
+			if (seen_or_pass0 & SEEN_DATAREF) {
 				if (offsetof(struct sk_buff, len) <= 127)
 					/* mov    off8(%rdi),%r9d */
 					EMIT4(0x44, 0x8b, 0x4f, offsetof(struct sk_buff, len));
@@ -260,9 +261,14 @@ void bpf_jit_compile(struct sk_filter *fp)
 			case BPF_S_ALU_DIV_X: /* A /= X; */
 				seen |= SEEN_XREG;
 				EMIT2(0x85, 0xdb);	/* test %ebx,%ebx */
-				if (pc_ret0 != -1)
-					EMIT_COND_JMP(X86_JE, addrs[pc_ret0] - (addrs[i] - 4));
-				else {
+				if (pc_ret0 > 0) {
+					/* addrs[pc_ret0 - 1] is start address of target
+					 * (addrs[i] - 4) is the address following this jmp
+					 * ("xor %edx,%edx; div %ebx" being 4 bytes long)
+					 */
+					EMIT_COND_JMP(X86_JE, addrs[pc_ret0 - 1] -
+								(addrs[i] - 4));
+				} else {
 					EMIT_COND_JMP(X86_JNE, 2 + 5);
 					CLEAR_A();
 					EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 4)); /* jmp .+off32 */
@@ -335,12 +341,12 @@ void bpf_jit_compile(struct sk_filter *fp)
 				}
 				/* fallinto */
 			case BPF_S_RET_A:
-				if (seen) {
+				if (seen_or_pass0) {
 					if (i != flen - 1) {
 						EMIT_JMP(cleanup_addr - addrs[i]);
 						break;
 					}
-					if (seen & SEEN_XREG)
+					if (seen_or_pass0 & SEEN_XREG)
 						EMIT4(0x48, 0x8b, 0x5d, 0xf8);  /* mov  -8(%rbp),%rbx */
 					EMIT1(0xc9);		/* leaveq */
 				}
@@ -483,8 +489,9 @@ common_load:			seen |= SEEN_DATAREF;
 				goto common_load;
 			case BPF_S_LDX_B_MSH:
 				if ((int)K < 0) {
-					if (pc_ret0 != -1) {
-						EMIT_JMP(addrs[pc_ret0] - addrs[i]);
+					if (pc_ret0 > 0) {
+						/* addrs[pc_ret0 - 1] is the start address */
+						EMIT_JMP(addrs[pc_ret0 - 1] - addrs[i]);
 						break;
 					}
 					CLEAR_A();
@@ -599,13 +606,14 @@ cond_branch:			f_offset = addrs[i + filter[i].jf] - addrs[i];
 		 * use it to give the cleanup instruction(s) addr
 		 */
 		cleanup_addr = proglen - 1; /* ret */
-		if (seen)
+		if (seen_or_pass0)
 			cleanup_addr -= 1; /* leaveq */
-		if (seen & SEEN_XREG)
+		if (seen_or_pass0 & SEEN_XREG)
 			cleanup_addr -= 4; /* mov  -8(%rbp),%rbx */
 
 		if (image) {
-			WARN_ON(proglen != oldproglen);
+			if (proglen != oldproglen)
+				pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n", proglen, oldproglen);
 			break;
 		}
 		if (proglen == oldproglen) {

drivers/net/bonding/bond_alb.c

@@ -909,16 +909,12 @@ static void alb_send_learning_packets(struct slave *slave, u8 mac_addr[])
 	}
 }
 
-/* hw is a boolean parameter that determines whether we should try and
- * set the hw address of the device as well as the hw address of the
- * net_device
- */
-static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[], int hw)
+static int alb_set_slave_mac_addr(struct slave *slave, u8 addr[])
 {
 	struct net_device *dev = slave->dev;
 	struct sockaddr s_addr;
 
-	if (!hw) {
+	if (slave->bond->params.mode == BOND_MODE_TLB) {
 		memcpy(dev->dev_addr, addr, dev->addr_len);
 		return 0;
 	}
@@ -948,8 +944,8 @@ static void alb_swap_mac_addr(struct bonding *bond, struct slave *slave1, struct
 	u8 tmp_mac_addr[ETH_ALEN];
 
 	memcpy(tmp_mac_addr, slave1->dev->dev_addr, ETH_ALEN);
-	alb_set_slave_mac_addr(slave1, slave2->dev->dev_addr, bond->alb_info.rlb_enabled);
-	alb_set_slave_mac_addr(slave2, tmp_mac_addr, bond->alb_info.rlb_enabled);
+	alb_set_slave_mac_addr(slave1, slave2->dev->dev_addr);
+	alb_set_slave_mac_addr(slave2, tmp_mac_addr);
 
 }
 
@@ -1096,8 +1092,7 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
 
 		/* Try setting slave mac to bond address and fall-through
 		   to code handling that situation below... */
-		alb_set_slave_mac_addr(slave, bond->dev->dev_addr,
-				       bond->alb_info.rlb_enabled);
+		alb_set_slave_mac_addr(slave, bond->dev->dev_addr);
 	}
 
 	/* The slave's address is equal to the address of the bond.
@@ -1133,8 +1128,7 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
 	}
 
 	if (free_mac_slave) {
-		alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr,
-				       bond->alb_info.rlb_enabled);
+		alb_set_slave_mac_addr(slave, free_mac_slave->perm_hwaddr);
 
 		pr_warning("%s: Warning: the hw address of slave %s is in use by the bond; giving it the hw address of %s\n",
 			   bond->dev->name, slave->dev->name,
@@ -1491,8 +1485,7 @@ int bond_alb_init_slave(struct bonding *bond, struct slave *slave)
 {
 	int res;
 
-	res = alb_set_slave_mac_addr(slave, slave->perm_hwaddr,
-				     bond->alb_info.rlb_enabled);
+	res = alb_set_slave_mac_addr(slave, slave->perm_hwaddr);
 	if (res) {
 		return res;
 	}
@@ -1643,8 +1636,7 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave
 		alb_swap_mac_addr(bond, swap_slave, new_slave);
 	} else {
 		/* set the new_slave to the bond mac address */
-		alb_set_slave_mac_addr(new_slave, bond->dev->dev_addr,
-				       bond->alb_info.rlb_enabled);
+		alb_set_slave_mac_addr(new_slave, bond->dev->dev_addr);
 	}
 
 	if (swap_slave) {
@@ -1704,8 +1696,7 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
 		alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave);
 		alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave);
 	} else {
-		alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr,
-				       bond->alb_info.rlb_enabled);
+		alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr);
 
 		read_lock(&bond->lock);
 		alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr);

drivers/net/dsa/mv88e6060.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/list.h>
+#include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>

drivers/net/dsa/mv88e6123_61_65.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/list.h>
+#include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>
@@ -20,12 +21,25 @@ static char *mv88e6123_61_65_probe(struct mii_bus *bus, int sw_addr)
 
 	ret = __mv88e6xxx_reg_read(bus, sw_addr, REG_PORT(0), 0x03);
 	if (ret >= 0) {
-		ret &= 0xfff0;
-		if (ret == 0x1210)
+		if (ret == 0x1212)
+			return "Marvell 88E6123 (A1)";
+		if (ret == 0x1213)
+			return "Marvell 88E6123 (A2)";
+		if ((ret & 0xfff0) == 0x1210)
 			return "Marvell 88E6123";
-		if (ret == 0x1610)
+
+		if (ret == 0x1612)
+			return "Marvell 88E6161 (A1)";
+		if (ret == 0x1613)
+			return "Marvell 88E6161 (A2)";
+		if ((ret & 0xfff0) == 0x1610)
 			return "Marvell 88E6161";
-		if (ret == 0x1650)
+
+		if (ret == 0x1652)
+			return "Marvell 88E6165 (A1)";
+		if (ret == 0x1653)
+			return "Marvell 88e6165 (A2)";
+		if ((ret & 0xfff0) == 0x1650)
 			return "Marvell 88E6165";
 	}
 

drivers/net/dsa/mv88e6131.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/list.h>
+#include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>

drivers/net/dsa/mv88e6xxx.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/list.h>
+#include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -3117,7 +3117,7 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index)
 	int rx_ring_size = 0;
 
 #ifdef BCM_CNIC
-	if (IS_MF_ISCSI_SD(bp)) {
+	if (!bp->rx_ring_size && IS_MF_ISCSI_SD(bp)) {
 		rx_ring_size = MIN_RX_SIZE_NONTPA;
 		bp->rx_ring_size = rx_ring_size;
 	} else