Merge 5.3-rc5 into staging-next

We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mariux64 · Aug 19, 2019 · c6d6832 · c6d6832
2 parents 87b42aa + d1abaeb
commit c6d6832
Show file tree

Hide file tree

Showing 173 changed files with 1,441 additions and 814 deletions.
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
@@ -19,7 +19,9 @@ quiet_cmd_mk_schema = SCHEMA  $@
 
 DT_DOCS = $(shell \
 	cd $(srctree)/$(src) && \
-	find * \( -name '*.yaml' ! -name $(DT_TMP_SCHEMA) \) \
+	find * \( -name '*.yaml' ! \
+		-name $(DT_TMP_SCHEMA) ! \
+		-name '*.example.dt.yaml' \) \
 	)
 
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))

diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
@@ -7,18 +7,6 @@ Required properties:
 - phy-mode : See ethernet.txt file in the same directory
 
 Optional properties:
-- phy-reset-gpios : Should specify the gpio for phy reset
-- phy-reset-duration : Reset duration in milliseconds.  Should present
-  only if property "phy-reset-gpios" is available.  Missing the property
-  will have the duration be 1 millisecond.  Numbers greater than 1000 are
-  invalid and 1 millisecond will be used instead.
-- phy-reset-active-high : If present then the reset sequence using the GPIO
-  specified in the "phy-reset-gpios" property is reversed (H=reset state,
-  L=operation state).
-- phy-reset-post-delay : Post reset delay in milliseconds. If present then
-  a delay of phy-reset-post-delay milliseconds will be observed after the
-  phy-reset-gpios has been toggled. Can be omitted thus no delay is
-  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
 - phy-supply : regulator that powers the Ethernet PHY.
 - phy-handle : phandle to the PHY device connected to this device.
 - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.
@@ -47,11 +35,27 @@ Optional properties:
   For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse
   per second interrupt associated with 1588 precision time protocol(PTP).
 
-
 Optional subnodes:
 - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes
   according to phy.txt in the same directory
 
+Deprecated optional properties:
+	To avoid these, create a phy node according to phy.txt in the same
+	directory, and point the fec's "phy-handle" property to it. Then use
+	the phy's reset binding, again described by phy.txt.
+- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-duration : Reset duration in milliseconds.  Should present
+  only if property "phy-reset-gpios" is available.  Missing the property
+  will have the duration be 1 millisecond.  Numbers greater than 1000 are
+  invalid and 1 millisecond will be used instead.
+- phy-reset-active-high : If present then the reset sequence using the GPIO
+  specified in the "phy-reset-gpios" property is reversed (H=reset state,
+  L=operation state).
+- phy-reset-post-delay : Post reset delay in milliseconds. If present then
+  a delay of phy-reset-post-delay milliseconds will be observed after the
+  phy-reset-gpios has been toggled. Can be omitted thus no delay is
+  observed. Delay is in range of 1ms to 1000ms. Other delays are invalid.
+
 Example:
 
 ethernet@83fec000 {

diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -37,7 +37,8 @@ properties:
   hwlocks: true
 
   st,syscfg:
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
     description: Should be phandle/offset/mask
     items:
       - description: Phandle to the syscon node which includes IRQ mux selection.

diff --git a/MAINTAINERS b/MAINTAINERS
@@ -6449,6 +6449,14 @@ S:	Maintained
 F:	drivers/perf/fsl_imx8_ddr_perf.c
 F:	Documentation/devicetree/bindings/perf/fsl-imx-ddr.txt
 
+FREESCALE IMX I2C DRIVER
+M:	Oleksij Rempel <o.rempel@pengutronix.de>
+R:	Pengutronix Kernel Team <kernel@pengutronix.de>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/busses/i2c-imx.c
+F:	Documentation/devicetree/bindings/i2c/i2c-imx.txt
+
 FREESCALE IMX LPI2C DRIVER
 M:	Dong Aisheng <aisheng.dong@nxp.com>
 L:	linux-i2c@vger.kernel.org
@@ -7460,7 +7468,7 @@ F:	drivers/net/hyperv/
 F:	drivers/scsi/storvsc_drv.c
 F:	drivers/uio/uio_hv_generic.c
 F:	drivers/video/fbdev/hyperv_fb.c
-F:	drivers/iommu/hyperv_iommu.c
+F:	drivers/iommu/hyperv-iommu.c
 F:	net/vmw_vsock/hyperv_transport.c
 F:	include/clocksource/hyperv_timer.h
 F:	include/linux/hyperv.h
@@ -8072,6 +8080,13 @@ T:	git git://git.code.sf.net/p/intel-sas/isci
 S:	Supported
 F:	drivers/scsi/isci/
 
+INTEL CPU family model numbers
+M:	Tony Luck <tony.luck@intel.com>
+M:	x86@kernel.org
+L:	linux-kernel@vger.kernel.org
+S:	Supported
+F:	arch/x86/include/asm/intel-family.h
+
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
 M:	Jani Nikula <jani.nikula@linux.intel.com>
 M:	Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
@@ -8423,7 +8438,6 @@ L:	linux-xfs@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/fs/xfs/xfs-linux.git
 S:	Supported
-F:	fs/iomap.c
 F:	fs/iomap/
 F:	include/linux/iomap.h
 

diff --git a/Makefile b/Makefile
@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Bobtail Squid
 
 # *DOCUMENTATION*

diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
@@ -2405,9 +2405,7 @@ long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr,
 pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot,
 		unsigned long attrs)
 {
-	if (!dev_is_dma_coherent(dev))
-		return __get_dma_pgprot(attrs, prot);
-	return prot;
+	return __get_dma_pgprot(attrs, prot);
 }
 
 void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,

diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
@@ -184,9 +184,17 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI),
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI),
+	/*
+	 * We already refuse to boot CPUs that don't support our configured
+	 * page size, so we can only detect mismatches for a page size other
+	 * than the one we're currently using. Unfortunately, SoCs like this
+	 * exist in the wild so, even though we don't like it, we'll have to go
+	 * along with it and treat them as non-strict.
+	 */
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN4_SHIFT, 4, ID_AA64MMFR0_TGRAN4_NI),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN64_SHIFT, 4, ID_AA64MMFR0_TGRAN64_NI),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_TGRAN16_SHIFT, 4, ID_AA64MMFR0_TGRAN16_NI),
+
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_BIGENDEL0_SHIFT, 4, 0),
 	/* Linux shouldn't care about secure memory */
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_SNSMEM_SHIFT, 4, 0),

diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
@@ -73,7 +73,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 
 	if (offset < -SZ_128M || offset >= SZ_128M) {
 #ifdef CONFIG_ARM64_MODULE_PLTS
-		struct plt_entry trampoline;
+		struct plt_entry trampoline, *dst;
 		struct module *mod;
 
 		/*
@@ -106,23 +106,27 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 		 * to check if the actual opcodes are in fact identical,
 		 * regardless of the offset in memory so use memcmp() instead.
 		 */
-		trampoline = get_plt_entry(addr, mod->arch.ftrace_trampoline);
-		if (memcmp(mod->arch.ftrace_trampoline, &trampoline,
-			   sizeof(trampoline))) {
-			if (plt_entry_is_initialized(mod->arch.ftrace_trampoline)) {
+		dst = mod->arch.ftrace_trampoline;
+		trampoline = get_plt_entry(addr, dst);
+		if (memcmp(dst, &trampoline, sizeof(trampoline))) {
+			if (plt_entry_is_initialized(dst)) {
 				pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n");
 				return -EINVAL;
 			}
 
 			/* point the trampoline to our ftrace entry point */
 			module_disable_ro(mod);
-			*mod->arch.ftrace_trampoline = trampoline;
+			*dst = trampoline;
 			module_enable_ro(mod, true);
 
-			/* update trampoline before patching in the branch */
-			smp_wmb();
+			/*
+			 * Ensure updated trampoline is visible to instruction
+			 * fetch before we patch in the branch.
+			 */
+			__flush_icache_range((unsigned long)&dst[0],
+					     (unsigned long)&dst[1]);
 		}
-		addr = (unsigned long)(void *)mod->arch.ftrace_trampoline;
+		addr = (unsigned long)dst;
 #else /* CONFIG_ARM64_MODULE_PLTS */
 		return -EINVAL;
 #endif /* CONFIG_ARM64_MODULE_PLTS */

diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
@@ -14,9 +14,7 @@
 pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot,
 		unsigned long attrs)
 {
-	if (!dev_is_dma_coherent(dev) || (attrs & DMA_ATTR_WRITE_COMBINE))
-		return pgprot_writecombine(prot);
-	return prot;
+	return pgprot_writecombine(prot);
 }
 
 void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
@@ -121,7 +121,6 @@ config PPC
 	select ARCH_32BIT_OFF_T if PPC32
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
-	select ARCH_HAS_DMA_MMAP_PGPROT
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
@@ -49,8 +49,7 @@ obj-y				:= cputable.o ptrace.o syscalls.o \
 				   signal.o sysfs.o cacheinfo.o time.o \
 				   prom.o traps.o setup-common.o \
 				   udbg.o misc.o io.o misc_$(BITS).o \
-				   of_platform.o prom_parse.o \
-				   dma-common.o
+				   of_platform.o prom_parse.o
 obj-$(CONFIG_PPC64)		+= setup_64.o sys_ppc32.o \
 				   signal_64.o ptrace32.o \
 				   paca.o nvram_64.o firmware.o

diff --git a/arch/powerpc/kernel/dma-common.c b/arch/powerpc/kernel/dma-common.c
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
@@ -54,6 +54,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
 CONFIG_HVC_RISCV_SBI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_SPI=y
 CONFIG_SPI_SIFIVE=y
 # CONFIG_PTP_1588_CLOCK is not set

diff --git a/arch/riscv/configs/rv32_defconfig b/arch/riscv/configs/rv32_defconfig
@@ -34,6 +34,7 @@ CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCIE_XILINX=y
 CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
@@ -53,6 +54,8 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
 CONFIG_HVC_RISCV_SBI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
 # CONFIG_PTP_1588_CLOCK is not set
 CONFIG_DRM=y
 CONFIG_DRM_RADEON=y

diff --git a/arch/riscv/include/asm/switch_to.h b/arch/riscv/include/asm/switch_to.h
@@ -16,7 +16,13 @@ extern void __fstate_restore(struct task_struct *restore_from);
 
 static inline void __fstate_clean(struct pt_regs *regs)
 {
-	regs->sstatus |= (regs->sstatus & ~(SR_FS)) | SR_FS_CLEAN;
+	regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_CLEAN;
+}
+
+static inline void fstate_off(struct task_struct *task,
+			      struct pt_regs *regs)
+{
+	regs->sstatus = (regs->sstatus & ~SR_FS) | SR_FS_OFF;
 }
 
 static inline void fstate_save(struct task_struct *task,

diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
@@ -53,10 +53,17 @@ static inline void remote_sfence_vma(struct cpumask *cmask, unsigned long start,
 }
 
 #define flush_tlb_all() sbi_remote_sfence_vma(NULL, 0, -1)
-#define flush_tlb_page(vma, addr) flush_tlb_range(vma, addr, 0)
+
 #define flush_tlb_range(vma, start, end) \
 	remote_sfence_vma(mm_cpumask((vma)->vm_mm), start, (end) - (start))
-#define flush_tlb_mm(mm) \
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long addr)
+{
+	flush_tlb_range(vma, addr, addr + PAGE_SIZE);
+}
+
+#define flush_tlb_mm(mm)				\
 	remote_sfence_vma(mm_cpumask(mm), 0, -1)
 
 #endif /* CONFIG_SMP */

diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
@@ -64,8 +64,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc,
 	unsigned long sp)
 {
 	regs->sstatus = SR_SPIE;
-	if (has_fpu)
+	if (has_fpu) {
 		regs->sstatus |= SR_FS_INITIAL;
+		/*
+		 * Restore the initial value to the FP register
+		 * before starting the user program.
+		 */
+		fstate_restore(current, regs);
+	}
 	regs->sepc = pc;
 	regs->sp = sp;
 	set_fs(USER_DS);
@@ -75,10 +81,11 @@ void flush_thread(void)
 {
 #ifdef CONFIG_FPU
 	/*
-	 * Reset FPU context
+	 * Reset FPU state and context
 	 *	frm: round to nearest, ties to even (IEEE default)
 	 *	fflags: accrued exceptions cleared
 	 */
+	fstate_off(current, task_pt_regs(current));
 	memset(&current->thread.fstate, 0, sizeof(current->thread.fstate));
 #endif
 }

diff --git a/arch/sh/kernel/disassemble.c b/arch/sh/kernel/disassemble.c
@@ -475,8 +475,6 @@ static void print_sh_insn(u32 memaddr, u16 insn)
 				printk("dbr");
 				break;
 			case FD_REG_N:
-				if (0)
-					goto d_reg_n;
 			case F_REG_N:
 				printk("fr%d", rn);
 				break;
@@ -488,7 +486,7 @@ static void print_sh_insn(u32 memaddr, u16 insn)
 					printk("xd%d", rn & ~1);
 					break;
 				}
-			d_reg_n:
+				/* else, fall through */
 			case D_REG_N:
 				printk("dr%d", rn);
 				break;
@@ -497,6 +495,7 @@ static void print_sh_insn(u32 memaddr, u16 insn)
 					printk("xd%d", rm & ~1);
 					break;
 				}
+				/* else, fall through */
 			case D_REG_M:
 				printk("dr%d", rm);
 				break;

diff --git a/arch/sh/kernel/hw_breakpoint.c b/arch/sh/kernel/hw_breakpoint.c
@@ -157,6 +157,7 @@ int arch_bp_generic_fields(int sh_len, int sh_type,
 	switch (sh_type) {
 	case SH_BREAKPOINT_READ:
 		*gen_type = HW_BREAKPOINT_R;
+		break;
 	case SH_BREAKPOINT_WRITE:
 		*gen_type = HW_BREAKPOINT_W;
 		break;