x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<l…

…evel>

Use a more current logging style:

 - Bare printks should have a KERN_<LEVEL> for consistency's sake
 - Add pr_fmt where appropriate
 - Neaten some macro definitions
 - Convert some Ok output to OK
 - Use "%s: ", __func__ in pr_fmt for summit
 - Convert some printks to pr_<level>

Message output is not identical in all cases.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: levinsasha928@gmail.com
Link: http://lkml.kernel.org/r/1337655007.24226.10.camel@joe2Laptop
[ merged two similar patches, tidied up the changelog ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>

arch/x86/include/asm/floppy.h

@@ -99,7 +99,7 @@ static irqreturn_t floppy_hardint(int irq, void *dev_id)
 		virtual_dma_residue += virtual_dma_count;
 		virtual_dma_count = 0;
 #ifdef TRACE_FLPY_INT
-		printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+		printk(KERN_DEBUG "count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
 		       virtual_dma_count, virtual_dma_residue, calls, bytes,
 		       dma_wait);
 		calls = 0;

arch/x86/include/asm/pci_x86.h

@@ -7,9 +7,13 @@
 #undef DEBUG
 
 #ifdef DEBUG
-#define DBG(x...) printk(x)
+#define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
 #else
-#define DBG(x...)
+#define DBG(fmt, ...)				\
+do {						\
+	if (0)					\
+		printk(fmt, ##__VA_ARGS__);	\
+} while (0)
 #endif
 
 #define PCI_PROBE_BIOS		0x0001

arch/x86/include/asm/pgtable-2level.h

@@ -2,9 +2,9 @@
 #define _ASM_X86_PGTABLE_2LEVEL_H
 
 #define pte_ERROR(e) \
-	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte_low)
+	pr_err("%s:%d: bad pte %08lx\n", __FILE__, __LINE__, (e).pte_low)
 #define pgd_ERROR(e) \
-	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+	pr_err("%s:%d: bad pgd %08lx\n", __FILE__, __LINE__, pgd_val(e))
 
 /*
  * Certain architectures need to do special things when PTEs

arch/x86/include/asm/pgtable-3level.h

@@ -9,13 +9,13 @@
  */
 
 #define pte_ERROR(e)							\
-	printk("%s:%d: bad pte %p(%08lx%08lx).\n",			\
+	pr_err("%s:%d: bad pte %p(%08lx%08lx)\n",			\
 	       __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
 #define pmd_ERROR(e)							\
-	printk("%s:%d: bad pmd %p(%016Lx).\n",				\
+	pr_err("%s:%d: bad pmd %p(%016Lx)\n",				\
 	       __FILE__, __LINE__, &(e), pmd_val(e))
 #define pgd_ERROR(e)							\
-	printk("%s:%d: bad pgd %p(%016Lx).\n",				\
+	pr_err("%s:%d: bad pgd %p(%016Lx)\n",				\
 	       __FILE__, __LINE__, &(e), pgd_val(e))
 
 /* Rules for using set_pte: the pte being assigned *must* be

arch/x86/include/asm/pgtable_64.h

@@ -26,16 +26,16 @@ extern pgd_t init_level4_pgt[];
 extern void paging_init(void);
 
 #define pte_ERROR(e)					\
-	printk("%s:%d: bad pte %p(%016lx).\n",		\
+	pr_err("%s:%d: bad pte %p(%016lx)\n",		\
 	       __FILE__, __LINE__, &(e), pte_val(e))
 #define pmd_ERROR(e)					\
-	printk("%s:%d: bad pmd %p(%016lx).\n",		\
+	pr_err("%s:%d: bad pmd %p(%016lx)\n",		\
 	       __FILE__, __LINE__, &(e), pmd_val(e))
 #define pud_ERROR(e)					\
-	printk("%s:%d: bad pud %p(%016lx).\n",		\
+	pr_err("%s:%d: bad pud %p(%016lx)\n",		\
 	       __FILE__, __LINE__, &(e), pud_val(e))
 #define pgd_ERROR(e)					\
-	printk("%s:%d: bad pgd %p(%016lx).\n",		\
+	pr_err("%s:%d: bad pgd %p(%016lx)\n",		\
 	       __FILE__, __LINE__, &(e), pgd_val(e))
 
 struct mm_struct;

arch/x86/kernel/alternative.c

@@ -1,3 +1,5 @@
+#define pr_fmt(fmt) "SMP alternatives: " fmt
+
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/mutex.h>
@@ -63,8 +65,11 @@ static int __init setup_noreplace_paravirt(char *str)
 __setup("noreplace-paravirt", setup_noreplace_paravirt);
 #endif
 
-#define DPRINTK(fmt, args...) if (debug_alternative) \
-	printk(KERN_DEBUG fmt, args)
+#define DPRINTK(fmt, ...)				\
+do {							\
+	if (debug_alternative)				\
+		printk(KERN_DEBUG fmt, ##__VA_ARGS__);	\
+} while (0)
 
 /*
  * Each GENERIC_NOPX is of X bytes, and defined as an array of bytes
@@ -428,7 +433,7 @@ void alternatives_smp_switch(int smp)
 	 * If this still occurs then you should see a hang
 	 * or crash shortly after this line:
 	 */
-	printk("lockdep: fixing up alternatives.\n");
+	pr_info("lockdep: fixing up alternatives\n");
 #endif
 
 	if (noreplace_smp || smp_alt_once || skip_smp_alternatives)
@@ -444,14 +449,14 @@ void alternatives_smp_switch(int smp)
 	if (smp == smp_mode) {
 		/* nothing */
 	} else if (smp) {
-		printk(KERN_INFO "SMP alternatives: switching to SMP code\n");
+		pr_info("switching to SMP code\n");
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
 		clear_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
 		list_for_each_entry(mod, &smp_alt_modules, next)
 			alternatives_smp_lock(mod->locks, mod->locks_end,
 					      mod->text, mod->text_end);
 	} else {
-		printk(KERN_INFO "SMP alternatives: switching to UP code\n");
+		pr_info("switching to UP code\n");
 		set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
 		set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
 		list_for_each_entry(mod, &smp_alt_modules, next)
@@ -546,7 +551,7 @@ void __init alternative_instructions(void)
 #ifdef CONFIG_SMP
 	if (smp_alt_once) {
 		if (1 == num_possible_cpus()) {
-			printk(KERN_INFO "SMP alternatives: switching to UP code\n");
+			pr_info("switching to UP code\n");
 			set_cpu_cap(&boot_cpu_data, X86_FEATURE_UP);
 			set_cpu_cap(&cpu_data(0), X86_FEATURE_UP);
 

arch/x86/kernel/amd_nb.c

@@ -2,6 +2,9 @@
  * Shared support code for AMD K8 northbridges and derivates.
  * Copyright 2006 Andi Kleen, SUSE Labs. Subject to GPLv2.
  */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -258,7 +261,7 @@ void amd_flush_garts(void)
 	}
 	spin_unlock_irqrestore(&gart_lock, flags);
 	if (!flushed)
-		printk("nothing to flush?\n");
+		pr_notice("nothing to flush?\n");
 }
 EXPORT_SYMBOL_GPL(amd_flush_garts);
 
@@ -269,11 +272,10 @@ static __init int init_amd_nbs(void)
 	err = amd_cache_northbridges();
 
 	if (err < 0)
-		printk(KERN_NOTICE "AMD NB: Cannot enumerate AMD northbridges.\n");
+		pr_notice("Cannot enumerate AMD northbridges\n");
 
 	if (amd_cache_gart() < 0)
-		printk(KERN_NOTICE "AMD NB: Cannot initialize GART flush words, "
-		       "GART support disabled.\n");
+		pr_notice("Cannot initialize GART flush words, GART support disabled\n");
 
 	return err;
 }

arch/x86/kernel/apic/io_apic.c

@@ -448,8 +448,8 @@ static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pi
 
 	entry = alloc_irq_pin_list(node);
 	if (!entry) {
-		printk(KERN_ERR "can not alloc irq_pin_list (%d,%d,%d)\n",
-				node, apic, pin);
+		pr_err("can not alloc irq_pin_list (%d,%d,%d)\n",
+		       node, apic, pin);
 		return -ENOMEM;
 	}
 	entry->apic = apic;
@@ -661,7 +661,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin)
 	ioapic_mask_entry(apic, pin);
 	entry = ioapic_read_entry(apic, pin);
 	if (entry.irr)
-		printk(KERN_ERR "Unable to reset IRR for apic: %d, pin :%d\n",
+		pr_err("Unable to reset IRR for apic: %d, pin :%d\n",
 		       mpc_ioapic_id(apic), pin);
 }
 
@@ -895,7 +895,7 @@ static int irq_polarity(int idx)
 		}
 		case 2: /* reserved */
 		{
-			printk(KERN_WARNING "broken BIOS!!\n");
+			pr_warn("broken BIOS!!\n");
 			polarity = 1;
 			break;
 		}
@@ -906,7 +906,7 @@ static int irq_polarity(int idx)
 		}
 		default: /* invalid */
 		{
-			printk(KERN_WARNING "broken BIOS!!\n");
+			pr_warn("broken BIOS!!\n");
 			polarity = 1;
 			break;
 		}
@@ -948,7 +948,7 @@ static int irq_trigger(int idx)
 				}
 				default:
 				{
-					printk(KERN_WARNING "broken BIOS!!\n");
+					pr_warn("broken BIOS!!\n");
 					trigger = 1;
 					break;
 				}
@@ -962,7 +962,7 @@ static int irq_trigger(int idx)
 		}
 		case 2: /* reserved */
 		{
-			printk(KERN_WARNING "broken BIOS!!\n");
+			pr_warn("broken BIOS!!\n");
 			trigger = 1;
 			break;
 		}
@@ -973,7 +973,7 @@ static int irq_trigger(int idx)
 		}
 		default: /* invalid */
 		{
-			printk(KERN_WARNING "broken BIOS!!\n");
+			pr_warn("broken BIOS!!\n");
 			trigger = 0;
 			break;
 		}
@@ -991,7 +991,7 @@ static int pin_2_irq(int idx, int apic, int pin)
 	 * Debugging check, we are in big trouble if this message pops up!
 	 */
 	if (mp_irqs[idx].dstirq != pin)
-		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
+		pr_err("broken BIOS or MPTABLE parser, ayiee!!\n");
 
 	if (test_bit(bus, mp_bus_not_pci)) {
 		irq = mp_irqs[idx].srcbusirq;
@@ -1521,7 +1521,6 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 		reg_03.raw = io_apic_read(ioapic_idx, 3);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
-	printk("\n");
 	printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx));
 	printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw);
 	printk(KERN_DEBUG ".......    : physical APIC id: %02X\n", reg_00.bits.ID);
@@ -1578,7 +1577,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 				i,
 				ir_entry->index
 			);
-			printk("%1d   %1d    %1d    %1d   %1d   "
+			pr_cont("%1d   %1d    %1d    %1d   %1d   "
 				"%1d    %1d     %X    %02X\n",
 				ir_entry->format,
 				ir_entry->mask,
@@ -1598,7 +1597,7 @@ __apicdebuginit(void) print_IO_APIC(int ioapic_idx)
 				i,
 				entry.dest
 			);
-			printk("%1d    %1d    %1d   %1d   %1d    "
+			pr_cont("%1d    %1d    %1d   %1d   %1d    "
 				"%1d    %1d    %02X\n",
 				entry.mask,
 				entry.trigger,
@@ -1651,8 +1650,8 @@ __apicdebuginit(void) print_IO_APICs(void)
 			continue;
 		printk(KERN_DEBUG "IRQ%d ", irq);
 		for_each_irq_pin(entry, cfg->irq_2_pin)
-			printk("-> %d:%d", entry->apic, entry->pin);
-		printk("\n");
+			pr_cont("-> %d:%d", entry->apic, entry->pin);
+		pr_cont("\n");
 	}
 
 	printk(KERN_INFO ".................................... done.\n");
@@ -1665,9 +1664,9 @@ __apicdebuginit(void) print_APIC_field(int base)
 	printk(KERN_DEBUG);
 
 	for (i = 0; i < 8; i++)
-		printk(KERN_CONT "%08x", apic_read(base + i*0x10));
+		pr_cont("%08x", apic_read(base + i*0x10));
 
-	printk(KERN_CONT "\n");
+	pr_cont("\n");
 }
 
 __apicdebuginit(void) print_local_APIC(void *dummy)
@@ -1769,7 +1768,7 @@ __apicdebuginit(void) print_local_APIC(void *dummy)
 			printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
 		}
 	}
-	printk("\n");
+	pr_cont("\n");
 }
 
 __apicdebuginit(void) print_local_APICs(int maxcpu)
@@ -2065,7 +2064,7 @@ void __init setup_ioapic_ids_from_mpc_nocheck(void)
 		reg_00.raw = io_apic_read(ioapic_idx, 0);
 		raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 		if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx))
-			printk("could not set ID!\n");
+			pr_cont("could not set ID!\n");
 		else
 			apic_printk(APIC_VERBOSE, " ok.\n");
 	}
@@ -3563,7 +3562,8 @@ static int __init io_apic_get_unique_id(int ioapic, int apic_id)
 
 		/* Sanity check */
 		if (reg_00.bits.ID != apic_id) {
-			printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic);
+			pr_err("IOAPIC[%d]: Unable to change apic_id!\n",
+			       ioapic);
 			return -1;
 		}
 	}

arch/x86/kernel/apic/summit_32.c

@@ -26,6 +26,8 @@
  *
  */
 
+#define pr_fmt(fmt) "summit: %s: " fmt, __func__
+
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <asm/io.h>
@@ -235,8 +237,8 @@ static int summit_apic_id_registered(void)
 
 static void summit_setup_apic_routing(void)
 {
-	printk("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
-						nr_ioapics);
+	pr_info("Enabling APIC mode:  Summit.  Using %d I/O APICs\n",
+		nr_ioapics);
 }
 
 static int summit_cpu_present_to_apicid(int mps_cpu)
@@ -275,7 +277,7 @@ static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask)
 		int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu);
 
 		if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) {
-			printk("%s: Not a valid mask!\n", __func__);
+			pr_err("Not a valid mask!\n");
 			return BAD_APICID;
 		}
 		apicid |= new_apicid;
@@ -355,7 +357,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 		}
 	}
 	if (i == rio_table_hdr->num_rio_dev) {
-		printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
+		pr_err("Couldn't find owner Cyclone for Winnipeg!\n");
 		return last_bus;
 	}
 
@@ -366,7 +368,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 		}
 	}
 	if (i == rio_table_hdr->num_scal_dev) {
-		printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
+		pr_err("Couldn't find owner Twister for Cyclone!\n");
 		return last_bus;
 	}
 
@@ -396,7 +398,7 @@ static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 		num_buses = 9;
 		break;
 	default:
-		printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
+		pr_info("Unsupported Winnipeg type!\n");
 		return last_bus;
 	}
 
@@ -411,13 +413,15 @@ static int build_detail_arrays(void)
 	int i, scal_detail_size, rio_detail_size;
 
 	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
-		printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+		pr_warn("MAX_NUMNODES too low!  Defined as %d, but system has %d nodes\n",
+			MAX_NUMNODES, rio_table_hdr->num_scal_dev);
 		return 0;
 	}
 
 	switch (rio_table_hdr->version) {
 	default:
-		printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
+		pr_warn("Invalid Rio Grande Table Version: %d\n",
+			rio_table_hdr->version);
 		return 0;
 	case 2:
 		scal_detail_size = 11;
@@ -462,7 +466,7 @@ void setup_summit(void)
 		offset = *((unsigned short *)(ptr + offset));
 	}
 	if (!rio_table_hdr) {
-		printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
+		pr_err("Unable to locate Rio Grande Table in EBDA - bailing!\n");
 		return;
 	}