Merge tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/…

…linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== Major stack changes: * EHT channel puncturing support (client & AP) * some support for AP MLD without mac80211 * fixes for A-MSDU on mesh connections Major driver changes: iwlwifi * EHT rate reporting * Bump FW API to 74 for AX devices * STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware mt76 * switch to using page pool allocator * mt7996 EHT (Wi-Fi 7) support * Wireless Ethernet Dispatch (WED) reset support libertas * WPS enrollee support brcmfmac * Rename Cypress 89459 to BCM4355 * BCM4355 and BCM4377 support mwifiex * SD8978 chipset support rtl8xxxu * LED support ath12k * new driver for Qualcomm Wi-Fi 7 devices ath11k * IPQ5018 support * Fine Timing Measurement (FTM) responder role support * channel 177 support ath10k * store WLAN firmware version in SMEM image table * tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits) wifi: brcmfmac: p2p: Introduce generic flexible array frame member wifi: mac80211: add documentation for amsdu_mesh_control wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description wifi: mac80211: always initialize link_sta with sta wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta() wifi: cfg80211: Set SSID if it is not already set wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status() wifi: rtw88: usb: drop now unnecessary URB size check wifi: rtw88: usb: send Zero length packets if necessary wifi: rtw88: usb: Set qsel correctly wifi: mac80211: fix off-by-one link setting wifi: mac80211: Fix for Rx fragmented action frames wifi: mac80211: avoid u32_encode_bits() warning wifi: mac80211: Don't translate MLD addresses for multicast wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify wifi: nl80211: Allow authentication frames and set keys on NAN interface wifi: mac80211: fix non-MLO station association wifi: mac80211: Allow NSS change only up to capability ... ==================== Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mariux64 · Feb 16, 2023 · ca0df43 · ca0df43
2 parents 40967f7 + 1a30a6b
commit ca0df43
Show file tree

Hide file tree

Showing 246 changed files with 58,091 additions and 2,063 deletions.
diff --git a/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml b/Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
@@ -29,15 +29,15 @@ additionalProperties: false
 
 examples:
   - |
-      mmc {
-          #address-cells = <1>;
-          #size-cells = <0>;
-
-          wifi@1 {
-              compatible = "esp,esp8089";
-              reg = <1>;
-              esp,crystal-26M-en = <2>;
-          };
-      };
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wifi@1 {
+            compatible = "esp,esp8089";
+            reg = <1>;
+            esp,crystal-26M-en = <2>;
+        };
+    };
 
 ...
diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml b/Documentation/devicetree/bindings/net/wireless/ieee80211.yaml
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
-
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/wireless/ieee80211.yaml#

diff --git a/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt b/Documentation/devicetree/bindings/net/wireless/marvell-8xxx.txt
@@ -1,4 +1,4 @@
-Marvell 8787/8897/8997 (sd8787/sd8897/sd8997/pcie8997) SDIO/PCIE devices
+Marvell 8787/8897/8978/8997 (sd8787/sd8897/sd8978/sd8997/pcie8997) SDIO/PCIE devices
 ------
 
 This node provides properties for controlling the Marvell SDIO/PCIE wireless device.
@@ -10,7 +10,9 @@ Required properties:
   - compatible : should be one of the following:
 	* "marvell,sd8787"
 	* "marvell,sd8897"
+	* "marvell,sd8978"
 	* "marvell,sd8997"
+	* "nxp,iw416"
 	* "pci11ab,2b42"
 	* "pci1b4b,2b42"
 

diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
-
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/wireless/mediatek,mt76.yaml#

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
@@ -1,6 +1,5 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 # Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
-
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/wireless/qcom,ath11k.yaml#
@@ -21,6 +20,7 @@ properties:
       - qcom,ipq8074-wifi
       - qcom,ipq6018-wifi
       - qcom,wcn6750-wifi
+      - qcom,ipq5018-wifi
 
   reg:
     maxItems: 1
@@ -262,10 +262,10 @@ allOf:
 examples:
   - |
 
-    q6v5_wcss: q6v5_wcss@CD00000 {
+    q6v5_wcss: remoteproc@cd00000 {
         compatible = "qcom,ipq8074-wcss-pil";
-        reg = <0xCD00000 0x4040>,
-              <0x4AB000 0x20>;
+        reg = <0xcd00000 0x4040>,
+              <0x4ab000 0x20>;
         reg-names = "qdsp6",
                     "rmb";
     };
@@ -386,7 +386,7 @@ examples:
         #address-cells = <2>;
         #size-cells = <2>;
 
-        qcn9074_0: qcn9074_0@51100000 {
+        qcn9074_0: wifi@51100000 {
             no-map;
             reg = <0x0 0x51100000 0x0 0x03500000>;
         };
@@ -463,6 +463,6 @@ examples:
         qcom,smem-states = <&wlan_smp2p_out 0>;
         qcom,smem-state-names = "wlan-smp2p-out";
         wifi-firmware {
-                iommus = <&apps_smmu 0x1c02 0x1>;
+            iommus = <&apps_smmu 0x1c02 0x1>;
         };
     };
diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml
@@ -2,7 +2,6 @@
 # Copyright (c) 2020, Silicon Laboratories, Inc.
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -90,47 +90,47 @@ examples:
 
     // For wl12xx family:
     spi1 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            wlcore1: wlcore@1 {
-                    compatible = "ti,wl1271";
-                    reg = <1>;
-                    spi-max-frequency = <48000000>;
-                    interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-                    vwlan-supply = <&vwlan_fixed>;
-                    clock-xtal;
-                    ref-clock-frequency = <38400000>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore1: wlcore@1 {
+            compatible = "ti,wl1271";
+            reg = <1>;
+            spi-max-frequency = <48000000>;
+            interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+            vwlan-supply = <&vwlan_fixed>;
+            clock-xtal;
+            ref-clock-frequency = <38400000>;
+        };
     };
 
     // For wl18xx family:
     spi2 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            wlcore2: wlcore@0 {
-                    compatible = "ti,wl1835";
-                    reg = <0>;
-                    spi-max-frequency = <48000000>;
-                    interrupts = <27 IRQ_TYPE_EDGE_RISING>;
-                    vwlan-supply = <&vwlan_fixed>;
-            };
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore2: wlcore@0 {
+            compatible = "ti,wl1835";
+            reg = <0>;
+            spi-max-frequency = <48000000>;
+            interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+            vwlan-supply = <&vwlan_fixed>;
+        };
     };
 
     // SDIO example:
     mmc3 {
-            vmmc-supply = <&wlan_en_reg>;
-            bus-width = <4>;
-            cap-power-off-card;
-            keep-power-in-suspend;
-
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            wlcore3: wlcore@2 {
-                    compatible = "ti,wl1835";
-                    reg = <2>;
-                    interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
-            };
+        vmmc-supply = <&wlan_en_reg>;
+        bus-width = <4>;
+        cap-power-off-card;
+        keep-power-in-suspend;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        wlcore3: wlcore@2 {
+            compatible = "ti,wl1835";
+            reg = <2>;
+            interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+        };
     };
diff --git a/MAINTAINERS b/MAINTAINERS
@@ -17254,6 +17254,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml
 F:	drivers/net/wireless/ath/ath11k/
 
+QUALCOMM ATH12K WIRELESS DRIVER
+M:	Kalle Valo <kvalo@kernel.org>
+L:	ath12k@lists.infradead.org
+S:	Supported
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
+F:	drivers/net/wireless/ath/ath12k/
+
 QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
 M:	Toke Høiland-Jørgensen <toke@toke.dk>
 L:	linux-wireless@vger.kernel.org

diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
@@ -63,5 +63,6 @@ source "drivers/net/wireless/ath/wil6210/Kconfig"
 source "drivers/net/wireless/ath/ath10k/Kconfig"
 source "drivers/net/wireless/ath/wcn36xx/Kconfig"
 source "drivers/net/wireless/ath/ath11k/Kconfig"
+source "drivers/net/wireless/ath/ath12k/Kconfig"
 
 endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_WIL6210)		+= wil6210/
 obj-$(CONFIG_ATH10K)		+= ath10k/
 obj-$(CONFIG_WCN36XX)		+= wcn36xx/
 obj-$(CONFIG_ATH11K)		+= ath11k/
+obj-$(CONFIG_ATH12K)		+= ath12k/
 
 obj-$(CONFIG_ATH_COMMON)	+= ath.o
 

diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c
@@ -208,14 +208,6 @@ ath10k_ce_shadow_src_ring_write_index_set(struct ath10k *ar,
 	ath10k_ce_write32(ar, shadow_sr_wr_ind_addr(ar, ce_state), value);
 }
 
-static inline void
-ath10k_ce_shadow_dest_ring_write_index_set(struct ath10k *ar,
-					   struct ath10k_ce_pipe *ce_state,
-					   unsigned int value)
-{
-	ath10k_ce_write32(ar, shadow_dst_wr_ind_addr(ar, ce_state), value);
-}
-
 static inline void ath10k_ce_src_ring_base_addr_set(struct ath10k *ar,
 						    u32 ce_id,
 						    u64 addr)

diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c
@@ -32,6 +32,9 @@ static const struct of_device_id ath11k_ahb_of_match[] = {
 	{ .compatible = "qcom,wcn6750-wifi",
 	  .data = (void *)ATH11K_HW_WCN6750_HW10,
 	},
+	{ .compatible = "qcom,ipq5018-wifi",
+	  .data = (void *)ATH11K_HW_IPQ5018_HW10,
+	},
 	{ }
 };
 
@@ -267,30 +270,42 @@ static void ath11k_ahb_clearbit32(struct ath11k_base *ab, u8 bit, u32 offset)
 static void ath11k_ahb_ce_irq_enable(struct ath11k_base *ab, u16 ce_id)
 {
 	const struct ce_attr *ce_attr;
+	const struct ce_ie_addr *ce_ie_addr = ab->hw_params.ce_ie_addr;
+	u32 ie1_reg_addr, ie2_reg_addr, ie3_reg_addr;
+
+	ie1_reg_addr = ce_ie_addr->ie1_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie2_reg_addr = ce_ie_addr->ie2_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie3_reg_addr = ce_ie_addr->ie3_reg_addr + ATH11K_CE_OFFSET(ab);
 
 	ce_attr = &ab->hw_params.host_ce_config[ce_id];
 	if (ce_attr->src_nentries)
-		ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
+		ath11k_ahb_setbit32(ab, ce_id, ie1_reg_addr);
 
 	if (ce_attr->dest_nentries) {
-		ath11k_ahb_setbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
+		ath11k_ahb_setbit32(ab, ce_id, ie2_reg_addr);
 		ath11k_ahb_setbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
-				    CE_HOST_IE_3_ADDRESS);
+				    ie3_reg_addr);
 	}
 }
 
 static void ath11k_ahb_ce_irq_disable(struct ath11k_base *ab, u16 ce_id)
 {
 	const struct ce_attr *ce_attr;
+	const struct ce_ie_addr *ce_ie_addr = ab->hw_params.ce_ie_addr;
+	u32 ie1_reg_addr, ie2_reg_addr, ie3_reg_addr;
+
+	ie1_reg_addr = ce_ie_addr->ie1_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie2_reg_addr = ce_ie_addr->ie2_reg_addr + ATH11K_CE_OFFSET(ab);
+	ie3_reg_addr = ce_ie_addr->ie3_reg_addr + ATH11K_CE_OFFSET(ab);
 
 	ce_attr = &ab->hw_params.host_ce_config[ce_id];
 	if (ce_attr->src_nentries)
-		ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_ADDRESS);
+		ath11k_ahb_clearbit32(ab, ce_id, ie1_reg_addr);
 
 	if (ce_attr->dest_nentries) {
-		ath11k_ahb_clearbit32(ab, ce_id, CE_HOST_IE_2_ADDRESS);
+		ath11k_ahb_clearbit32(ab, ce_id, ie2_reg_addr);
 		ath11k_ahb_clearbit32(ab, ce_id + CE_HOST_IE_3_SHIFT,
-				      CE_HOST_IE_3_ADDRESS);
+				      ie3_reg_addr);
 	}
 }
 
@@ -1150,6 +1165,22 @@ static int ath11k_ahb_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_core_free;
 
+	ab->mem_ce = ab->mem;
+
+	if (ab->hw_params.ce_remap) {
+		const struct ce_remap *ce_remap = ab->hw_params.ce_remap;
+		/* ce register space is moved out of wcss unlike ipq8074 or ipq6018
+		 * and the space is not contiguous, hence remapping the CE registers
+		 * to a new space for accessing them.
+		 */
+		ab->mem_ce = ioremap(ce_remap->base, ce_remap->size);
+		if (IS_ERR(ab->mem_ce)) {
+			dev_err(&pdev->dev, "ce ioremap error\n");
+			ret = -ENOMEM;
+			goto err_core_free;
+		}
+	}
+
 	ret = ath11k_ahb_fw_resources_init(ab);
 	if (ret)
 		goto err_core_free;
@@ -1236,6 +1267,10 @@ static void ath11k_ahb_free_resources(struct ath11k_base *ab)
 	ath11k_ahb_release_smp2p_handle(ab);
 	ath11k_ahb_fw_resource_deinit(ab);
 	ath11k_ce_free_pipes(ab);
+
+	if (ab->hw_params.ce_remap)
+		iounmap(ab->mem_ce);
+
 	ath11k_core_free(ab);
 	platform_set_drvdata(pdev, NULL);
 }

diff --git a/drivers/net/wireless/ath/ath11k/ce.h b/drivers/net/wireless/ath/ath11k/ce.h
@@ -49,6 +49,11 @@ void ath11k_ce_byte_swap(void *mem, u32 len);
 #define CE_HOST_IE_2_ADDRESS	0x00A18040
 #define CE_HOST_IE_3_ADDRESS	CE_HOST_IE_ADDRESS
 
+/* CE IE registers are different for IPQ5018 */
+#define CE_HOST_IPQ5018_IE_ADDRESS		0x0841804C
+#define CE_HOST_IPQ5018_IE_2_ADDRESS		0x08418050
+#define CE_HOST_IPQ5018_IE_3_ADDRESS		CE_HOST_IPQ5018_IE_ADDRESS
+
 #define CE_HOST_IE_3_SHIFT	0xC
 
 #define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask))
@@ -84,6 +89,17 @@ struct ce_pipe_config {
 	__le32 reserved;
 };
 
+struct ce_ie_addr {
+	u32 ie1_reg_addr;
+	u32 ie2_reg_addr;
+	u32 ie3_reg_addr;
+};
+
+struct ce_remap {
+	u32 base;
+	u32 size;
+};
+
 struct ce_attr {
 	/* CE_ATTR_* values */
 	unsigned int flags;