m68k/mac: Replace macide driver with generic platform drivers

This allows m68k mac systems to switch from the deprecated IDE subsystem
to libata.

This was tested on my Quadra 630. I haven't tested it on my PowerBook 150
because I don't have a RAM adapter board for it. It appears that the
hardware I tested doesn't need macide_clear_irq() or macide_test_irq().
If it did, the generic driver would not have worked. It's possible that
those routines are needed for the PowerBook 150 but we can cross that
bridge if and when we come to it.

BTW, macide_clear_irq() appears to suffer from a race condition. The write
to the interrupt flags register could have unintended side effects as it
may alter other flag bits. Fortunately, all of the other bits are unused
by Linux. When tested on my Quadra 630, the assignment *ide_ifr &= ~0x20
was observed to have no effect on bit 5, so it may be redundant anyway.

Cc: Michael Schmitz <schmitzmic@gmail.com>
Cc: Joshua Thompson <funaho@jurai.org>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/11a56b3317df3bb2ddc15fd29b40b6820e9c7444.1623287706.git.fthain@linux-m68k.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

arch/m68k/configs/mac_defconfig

@@ -319,7 +319,6 @@ CONFIG_IDE=y
 CONFIG_IDE_GD_ATAPI=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_PLATFORM=y
-CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y

arch/m68k/configs/multi_defconfig

@@ -351,7 +351,6 @@ CONFIG_BLK_DEV_PLATFORM=y
 CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_BUDDHA=y
 CONFIG_BLK_DEV_FALCON_IDE=y
-CONFIG_BLK_DEV_MAC_IDE=y
 CONFIG_BLK_DEV_Q40IDE=y
 CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y

arch/m68k/mac/config.c

@@ -933,13 +933,15 @@ static const struct resource mac_scsi_ccl_rsrc[] __initconst = {
 	},
 };
 
-static const struct resource mac_ide_quadra_rsrc[] __initconst = {
-	DEFINE_RES_MEM(0x50F1A000, 0x104),
+static const struct resource mac_pata_quadra_rsrc[] __initconst = {
+	DEFINE_RES_MEM(0x50F1A000, 0x38),
+	DEFINE_RES_MEM(0x50F1A038, 0x04),
 	DEFINE_RES_IRQ(IRQ_NUBUS_F),
 };
 
-static const struct resource mac_ide_pb_rsrc[] __initconst = {
-	DEFINE_RES_MEM(0x50F1A000, 0x104),
+static const struct resource mac_pata_pb_rsrc[] __initconst = {
+	DEFINE_RES_MEM(0x50F1A000, 0x38),
+	DEFINE_RES_MEM(0x50F1A038, 0x04),
 	DEFINE_RES_IRQ(IRQ_NUBUS_C),
 };
 
@@ -949,7 +951,7 @@ static const struct resource mac_pata_baboon_rsrc[] __initconst = {
 	DEFINE_RES_IRQ(IRQ_BABOON_1),
 };
 
-static const struct pata_platform_info mac_pata_baboon_data __initconst = {
+static const struct pata_platform_info mac_pata_data __initconst = {
 	.ioport_shift = 2,
 };
 
@@ -1067,17 +1069,19 @@ int __init mac_platform_init(void)
 
 	switch (macintosh_config->ide_type) {
 	case MAC_IDE_QUADRA:
-		platform_device_register_simple("mac_ide", -1,
-			mac_ide_quadra_rsrc, ARRAY_SIZE(mac_ide_quadra_rsrc));
+		platform_device_register_resndata(NULL, "pata_platform", -1,
+			mac_pata_quadra_rsrc, ARRAY_SIZE(mac_pata_quadra_rsrc),
+			&mac_pata_data, sizeof(mac_pata_data));
 		break;
 	case MAC_IDE_PB:
-		platform_device_register_simple("mac_ide", -1,
-			mac_ide_pb_rsrc, ARRAY_SIZE(mac_ide_pb_rsrc));
+		platform_device_register_resndata(NULL, "pata_platform", -1,
+			mac_pata_pb_rsrc, ARRAY_SIZE(mac_pata_pb_rsrc),
+			&mac_pata_data, sizeof(mac_pata_data));
 		break;
 	case MAC_IDE_BABOON:
 		platform_device_register_resndata(NULL, "pata_platform", -1,
 			mac_pata_baboon_rsrc, ARRAY_SIZE(mac_pata_baboon_rsrc),
-			&mac_pata_baboon_data, sizeof(mac_pata_baboon_data));
+			&mac_pata_data, sizeof(mac_pata_data));
 		break;
 	}
 

drivers/ide/Kconfig

@@ -739,20 +739,6 @@ config BLK_DEV_FALCON_IDE
 	  disks, CD-ROM drives, etc.) that are connected to the on-board IDE
 	  interface.
 
-config BLK_DEV_MAC_IDE
-	tristate "Macintosh Quadra/Powerbook IDE interface support"
-	depends on MAC
-	help
-	  This is the IDE driver for the on-board IDE interface on some m68k
-	  Macintosh models, namely Quadra/Centris 630, Performa 588 and
-	  Powerbook 150. The IDE interface on the Powerbook 190 is not
-	  supported by this driver and requires BLK_DEV_PLATFORM or
-	  PATA_PLATFORM.
-
-	  Say Y if you have such an Macintosh model and want to use IDE
-	  devices (hard disks, CD-ROM drives, etc.) that are connected to the
-	  on-board IDE interface.
-
 config BLK_DEV_Q40IDE
 	tristate "Q40/Q60 IDE interface support"
 	depends on Q40

drivers/ide/Makefile

@@ -29,7 +29,6 @@ obj-$(CONFIG_BLK_DEV_4DRIVES)		+= ide-4drives.o
 
 obj-$(CONFIG_BLK_DEV_GAYLE)		+= gayle.o
 obj-$(CONFIG_BLK_DEV_FALCON_IDE)	+= falconide.o
-obj-$(CONFIG_BLK_DEV_MAC_IDE)		+= macide.o
 obj-$(CONFIG_BLK_DEV_Q40IDE)		+= q40ide.o
 obj-$(CONFIG_BLK_DEV_BUDDHA)		+= buddha.o