Skip to content

Commit

Permalink
powerpc/powernv: Drop PHB operation reset()
Browse files Browse the repository at this point in the history 
The patch drops PHB EEH operation reset() and merges its logic to
eeh_ops::reset().

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
  • Loading branch information
Gavin Shan authored and Benjamin Herrenschmidt committed Mar 16, 2015
1 parent 2a485ad commit cadf364
Show file tree
Hide file tree
Showing 4 changed files with 223 additions and 244 deletions.
235 changes: 0 additions & 235 deletions arch/powerpc/platforms/powernv/eeh-ioda.c
View file
Original file line number Diff line number Diff line change
Expand Up @@ -34,240 +34,5 @@
#include "powernv.h"
#include "pci.h"

static s64 ioda_eeh_phb_poll(struct pnv_phb *phb)
{
s64 rc = OPAL_HARDWARE;

while (1) {
rc = opal_pci_poll(phb->opal_id);
if (rc <= 0)
break;

if (system_state < SYSTEM_RUNNING)
udelay(1000 * rc);
else
msleep(rc);
}

return rc;
}

int ioda_eeh_phb_reset(struct pci_controller *hose, int option)
{
struct pnv_phb *phb = hose->private_data;
s64 rc = OPAL_HARDWARE;

pr_debug("%s: Reset PHB#%x, option=%d\n",
__func__, hose->global_number, option);

/* Issue PHB complete reset request */
if (option == EEH_RESET_FUNDAMENTAL ||
option == EEH_RESET_HOT)
rc = opal_pci_reset(phb->opal_id,
OPAL_RESET_PHB_COMPLETE,
OPAL_ASSERT_RESET);
else if (option == EEH_RESET_DEACTIVATE)
rc = opal_pci_reset(phb->opal_id,
OPAL_RESET_PHB_COMPLETE,
OPAL_DEASSERT_RESET);
if (rc < 0)
goto out;

/*
* Poll state of the PHB until the request is done
* successfully. The PHB reset is usually PHB complete
* reset followed by hot reset on root bus. So we also
* need the PCI bus settlement delay.
*/
rc = ioda_eeh_phb_poll(phb);
if (option == EEH_RESET_DEACTIVATE) {
if (system_state < SYSTEM_RUNNING)
udelay(1000 * EEH_PE_RST_SETTLE_TIME);
else
msleep(EEH_PE_RST_SETTLE_TIME);
}
out:
if (rc != OPAL_SUCCESS)
return -EIO;

return 0;
}

static int ioda_eeh_root_reset(struct pci_controller *hose, int option)
{
struct pnv_phb *phb = hose->private_data;
s64 rc = OPAL_SUCCESS;

pr_debug("%s: Reset PHB#%x, option=%d\n",
__func__, hose->global_number, option);

/*
* During the reset deassert time, we needn't care
* the reset scope because the firmware does nothing
* for fundamental or hot reset during deassert phase.
*/
if (option == EEH_RESET_FUNDAMENTAL)
rc = opal_pci_reset(phb->opal_id,
OPAL_RESET_PCI_FUNDAMENTAL,
OPAL_ASSERT_RESET);
else if (option == EEH_RESET_HOT)
rc = opal_pci_reset(phb->opal_id,
OPAL_RESET_PCI_HOT,
OPAL_ASSERT_RESET);
else if (option == EEH_RESET_DEACTIVATE)
rc = opal_pci_reset(phb->opal_id,
OPAL_RESET_PCI_HOT,
OPAL_DEASSERT_RESET);
if (rc < 0)
goto out;

/* Poll state of the PHB until the request is done */
rc = ioda_eeh_phb_poll(phb);
if (option == EEH_RESET_DEACTIVATE)
msleep(EEH_PE_RST_SETTLE_TIME);
out:
if (rc != OPAL_SUCCESS)
return -EIO;

return 0;
}

static int ioda_eeh_bridge_reset(struct pci_dev *dev, int option)

{
struct device_node *dn = pci_device_to_OF_node(dev);
struct eeh_dev *edev = of_node_to_eeh_dev(dn);
int aer = edev ? edev->aer_cap : 0;
u32 ctrl;

pr_debug("%s: Reset PCI bus %04x:%02x with option %d\n",
__func__, pci_domain_nr(dev->bus),
dev->bus->number, option);

switch (option) {
case EEH_RESET_FUNDAMENTAL:
case EEH_RESET_HOT:
/* Don't report linkDown event */
if (aer) {
eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
4, &ctrl);
ctrl |= PCI_ERR_UNC_SURPDN;
eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
4, ctrl);
}

eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
msleep(EEH_PE_RST_HOLD_TIME);

break;
case EEH_RESET_DEACTIVATE:
eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &ctrl);
ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
eeh_ops->write_config(dn, PCI_BRIDGE_CONTROL, 2, ctrl);
msleep(EEH_PE_RST_SETTLE_TIME);

/* Continue reporting linkDown event */
if (aer) {
eeh_ops->read_config(dn, aer + PCI_ERR_UNCOR_MASK,
4, &ctrl);
ctrl &= ~PCI_ERR_UNC_SURPDN;
eeh_ops->write_config(dn, aer + PCI_ERR_UNCOR_MASK,
4, ctrl);
}

break;
}

return 0;
}

void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
{
struct pci_controller *hose;

if (pci_is_root_bus(dev->bus)) {
hose = pci_bus_to_host(dev->bus);
ioda_eeh_root_reset(hose, EEH_RESET_HOT);
ioda_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
} else {
ioda_eeh_bridge_reset(dev, EEH_RESET_HOT);
ioda_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
}
}

/**
* ioda_eeh_reset - Reset the indicated PE
* @pe: EEH PE
* @option: reset option
*
* Do reset on the indicated PE. For PCI bus sensitive PE,
* we need to reset the parent p2p bridge. The PHB has to
* be reinitialized if the p2p bridge is root bridge. For
* PCI device sensitive PE, we will try to reset the device
* through FLR. For now, we don't have OPAL APIs to do HARD
* reset yet, so all reset would be SOFT (HOT) reset.
*/
static int ioda_eeh_reset(struct eeh_pe *pe, int option)
{
struct pci_controller *hose = pe->phb;
struct pci_bus *bus;
int ret;

/*
* For PHB reset, we always have complete reset. For those PEs whose
* primary bus derived from root complex (root bus) or root port
* (usually bus#1), we apply hot or fundamental reset on the root port.
* For other PEs, we always have hot reset on the PE primary bus.
*
* Here, we have different design to pHyp, which always clear the
* frozen state during PE reset. However, the good idea here from
* benh is to keep frozen state before we get PE reset done completely
* (until BAR restore). With the frozen state, HW drops illegal IO
* or MMIO access, which can incur recrusive frozen PE during PE
* reset. The side effect is that EEH core has to clear the frozen
* state explicitly after BAR restore.
*/
if (pe->type & EEH_PE_PHB) {
ret = ioda_eeh_phb_reset(hose, option);
} else {
struct pnv_phb *phb;
s64 rc;

/*
* The frozen PE might be caused by PAPR error injection
* registers, which are expected to be cleared after hitting
* frozen PE as stated in the hardware spec. Unfortunately,
* that's not true on P7IOC. So we have to clear it manually
* to avoid recursive EEH errors during recovery.
*/
phb = hose->private_data;
if (phb->model == PNV_PHB_MODEL_P7IOC &&
(option == EEH_RESET_HOT ||
option == EEH_RESET_FUNDAMENTAL)) {
rc = opal_pci_reset(phb->opal_id,
OPAL_RESET_PHB_ERROR,
OPAL_ASSERT_RESET);
if (rc != OPAL_SUCCESS) {
pr_warn("%s: Failure %lld clearing "
"error injection registers\n",
__func__, rc);
return -EIO;
}
}

bus = eeh_pe_bus_get(pe);
if (pci_is_root_bus(bus) ||
pci_is_root_bus(bus->parent))
ret = ioda_eeh_root_reset(hose, option);
else
ret = ioda_eeh_bridge_reset(bus->self, option);
}

return ret;
}

struct pnv_eeh_ops ioda_eeh_ops = {
.reset = ioda_eeh_reset,
};
Loading

0 comments on commit cadf364

Please sign in to comment.