[SCSI] lpfc 8.3.28: Add support for ABTS failure handling

Add support for ABTS failure handling:

- Add asynchronous ABTS notification event feature to driver (CR 124578)
- Change driver message 3092 and 3116 to KERN_WARNING (CR 124768)
- Alter the SCR ELS command to use the temporary RPI and the
  Destination DID for SLI4-FC (CR 126070)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc_crtn.h

@@ -106,7 +106,7 @@ void lpfc_cleanup(struct lpfc_vport *);
 void lpfc_disc_timeout(unsigned long);
 
 struct lpfc_nodelist *__lpfc_findnode_rpi(struct lpfc_vport *, uint16_t);
-
+struct lpfc_nodelist *lpfc_findnode_rpi(struct lpfc_vport *, uint16_t);
 void lpfc_worker_wake_up(struct lpfc_hba *);
 int lpfc_workq_post_event(struct lpfc_hba *, void *, void *, uint32_t);
 int lpfc_do_work(void *);
@@ -455,3 +455,5 @@ int lpfc_sli4_queue_create(struct lpfc_hba *);
 void lpfc_sli4_queue_destroy(struct lpfc_hba *);
 int lpfc_sli4_read_config(struct lpfc_hba *phba);
 int lpfc_scsi_buf_update(struct lpfc_hba *phba);
+void lpfc_sli4_abts_err_handler(struct lpfc_hba *, struct lpfc_nodelist *,
+				struct sli4_wcqe_xri_aborted *);

drivers/scsi/lpfc/lpfc_els.c

@@ -6595,56 +6595,6 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	phba->fc_stat.elsRcvDrop++;
 }
 
-/**
- * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
- * @phba: pointer to lpfc hba data structure.
- * @vpi: host virtual N_Port identifier.
- *
- * This routine finds a vport on a HBA (referred by @phba) through a
- * @vpi. The function walks the HBA's vport list and returns the address
- * of the vport with the matching @vpi.
- *
- * Return code
- *    NULL - No vport with the matching @vpi found
- *    Otherwise - Address to the vport with the matching @vpi.
- **/
-struct lpfc_vport *
-lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
-{
-	struct lpfc_vport *vport;
-	unsigned long flags;
-	int i = 0;
-
-	/* The physical ports are always vpi 0 - translate is unnecessary. */
-	if (vpi > 0) {
-		/*
-		 * Translate the physical vpi to the logical vpi.  The
-		 * vport stores the logical vpi.
-		 */
-		for (i = 0; i < phba->max_vpi; i++) {
-			if (vpi == phba->vpi_ids[i])
-				break;
-		}
-
-		if (i >= phba->max_vpi) {
-			lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
-					 "2936 Could not find Vport mapped "
-					 "to vpi %d\n", vpi);
-			return NULL;
-		}
-	}
-
-	spin_lock_irqsave(&phba->hbalock, flags);
-	list_for_each_entry(vport, &phba->port_list, listentry) {
-		if (vport->vpi == i) {
-			spin_unlock_irqrestore(&phba->hbalock, flags);
-			return vport;
-		}
-	}
-	spin_unlock_irqrestore(&phba->hbalock, flags);
-	return NULL;
-}
-
 /**
  * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
  * @phba: pointer to lpfc hba data structure.

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -5352,6 +5352,73 @@ lpfc_findnode_wwpn(struct lpfc_vport *vport, struct lpfc_name *wwpn)
 	return ndlp;
 }
 
+/*
+ * This routine looks up the ndlp lists for the given RPI. If the rpi
+ * is found, the routine returns the node element list pointer else
+ * return NULL.
+ */
+struct lpfc_nodelist *
+lpfc_findnode_rpi(struct lpfc_vport *vport, uint16_t rpi)
+{
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+	struct lpfc_nodelist *ndlp;
+
+	spin_lock_irq(shost->host_lock);
+	ndlp = __lpfc_findnode_rpi(vport, rpi);
+	spin_unlock_irq(shost->host_lock);
+	return ndlp;
+}
+
+/**
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
+ * @phba: pointer to lpfc hba data structure.
+ * @vpi: the physical host virtual N_Port identifier.
+ *
+ * This routine finds a vport on a HBA (referred by @phba) through a
+ * @vpi. The function walks the HBA's vport list and returns the address
+ * of the vport with the matching @vpi.
+ *
+ * Return code
+ *    NULL - No vport with the matching @vpi found
+ *    Otherwise - Address to the vport with the matching @vpi.
+ **/
+struct lpfc_vport *
+lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
+{
+	struct lpfc_vport *vport;
+	unsigned long flags;
+	int i = 0;
+
+	/* The physical ports are always vpi 0 - translate is unnecessary. */
+	if (vpi > 0) {
+		/*
+		 * Translate the physical vpi to the logical vpi.  The
+		 * vport stores the logical vpi.
+		 */
+		for (i = 0; i < phba->max_vpi; i++) {
+			if (vpi == phba->vpi_ids[i])
+				break;
+		}
+
+		if (i >= phba->max_vpi) {
+			lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
+					 "2936 Could not find Vport mapped "
+					 "to vpi %d\n", vpi);
+			return NULL;
+		}
+	}
+
+	spin_lock_irqsave(&phba->hbalock, flags);
+	list_for_each_entry(vport, &phba->port_list, listentry) {
+		if (vport->vpi == i) {
+			spin_unlock_irqrestore(&phba->hbalock, flags);
+			return vport;
+		}
+	}
+	spin_unlock_irqrestore(&phba->hbalock, flags);
+	return NULL;
+}
+
 void
 lpfc_nlp_init(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	      uint32_t did)

drivers/scsi/lpfc/lpfc_hw.h

@@ -2819,7 +2819,8 @@ typedef struct {
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t rsvd1     : 19;  /* Reserved                             */
 	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
-	uint32_t rsvd2     :  3;  /* Reserved                             */
+	uint32_t casabt    :  1;  /* Configure async abts status notice   */
+	uint32_t rsvd2     :  2;  /* Reserved                             */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
 	uint32_t cmv       :  1;  /* Configure Max VPIs                   */
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
@@ -2839,14 +2840,16 @@ typedef struct {
 	uint32_t ccrp      :  1;  /* Config Command Ring Polling          */
 	uint32_t cmv	   :  1;  /* Configure Max VPIs                   */
 	uint32_t cbg       :  1;  /* Configure BlockGuard                 */
-	uint32_t rsvd2     :  3;  /* Reserved                             */
+	uint32_t rsvd2     :  2;  /* Reserved                             */
+	uint32_t casabt    :  1;  /* Configure async abts status notice   */
 	uint32_t cdss      :  1;  /* Configure Data Security SLI          */
 	uint32_t rsvd1     : 19;  /* Reserved                             */
 #endif
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint32_t rsvd3     : 19;  /* Reserved                             */
 	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
-	uint32_t rsvd4     :  3;  /* Reserved                             */
+	uint32_t gasabt    :  1;  /* Grant async abts status notice       */
+	uint32_t rsvd4     :  2;  /* Reserved                             */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
@@ -2866,7 +2869,8 @@ typedef struct {
 	uint32_t gcrp	   :  1;  /* Grant Command Ring Polling           */
 	uint32_t gmv	   :  1;  /* Grant Max VPIs                       */
 	uint32_t gbg       :  1;  /* Grant BlockGuard                     */
-	uint32_t rsvd4     :  3;  /* Reserved                             */
+	uint32_t rsvd4     :  2;  /* Reserved                             */
+	uint32_t gasabt    :  1;  /* Grant async abts status notice       */
 	uint32_t gdss      :  1;  /* Configure Data Security SLI          */
 	uint32_t rsvd3     : 19;  /* Reserved                             */
 #endif
@@ -3465,6 +3469,7 @@ typedef struct {
 } ASYNCSTAT_FIELDS;
 #define ASYNC_TEMP_WARN		0x100
 #define ASYNC_TEMP_SAFE		0x101
+#define ASYNC_STATUS_CN		0x102
 
 /* IOCB Command template for CMD_IOCB_RCV_ELS64_CX (0xB7)
    or CMD_IOCB_RCV_SEQ64_CX (0xB5) */

drivers/scsi/lpfc/lpfc_mbox.c

@@ -1293,6 +1293,10 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 		phba->sli_rev = LPFC_SLI_REV2;
 	mb->un.varCfgPort.sli_mode = phba->sli_rev;
 
+	/* If this is an SLI3 port, configure async status notification. */
+	if (phba->sli_rev == LPFC_SLI_REV3)
+		mb->un.varCfgPort.casabt = 1;
+
 	/* Now setup pcb */
 	phba->pcb->type = TYPE_NATIVE_SLI2;
 	phba->pcb->feature = FEATURE_INITIAL_SLI2;

drivers/scsi/lpfc/lpfc_scsi.c

@@ -681,8 +681,10 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
 
 			rrq_empty = list_empty(&phba->active_rrq_list);
 			spin_unlock_irqrestore(&phba->hbalock, iflag);
-			if (ndlp)
+			if (ndlp) {
 				lpfc_set_rrq_active(phba, ndlp, xri, rxid, 1);
+				lpfc_sli4_abts_err_handler(phba, ndlp, axri);
+			}
 			lpfc_release_scsi_buf_s4(phba, psb);
 			if (rrq_empty)
 				lpfc_worker_wake_up(phba);