ravb: Separate handling of irq enable/disable regs into feature

Currently, when the HW has a single interrupt, the driver uses the
GIC, TIC, RIC0 registers to enable and disable interrupts.
When the HW has multiple interrupts, it uses the GIE, GID, TIE, TID,
RIE0, RID0 registers.

However, other devices, e.g. RZ/V2M, have multiple irqs and only have
the GIC, TIC, RIC0 registers.
Therefore, split this into a separate feature.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/renesas/ravb.h

@@ -1027,6 +1027,7 @@ struct ravb_hw_info {
 	unsigned tx_counters:1;		/* E-MAC has TX counters */
 	unsigned carrier_counters:1;	/* E-MAC has carrier counters */
 	unsigned multi_irqs:1;		/* AVB-DMAC and E-MAC has multiple irqs */
+	unsigned irq_en_dis:1;		/* Has separate irq enable and disable regs */
 	unsigned gptp:1;		/* AVB-DMAC has gPTP support */
 	unsigned ccc_gac:1;		/* AVB-DMAC has gPTP support active in config mode */
 	unsigned nc_queues:1;		/* AVB-DMAC has RX and TX NC queues */

drivers/net/ethernet/renesas/ravb_main.c

@@ -1124,7 +1124,7 @@ static bool ravb_queue_interrupt(struct net_device *ndev, int q)
 	if (((ris0 & ric0) & BIT(q)) || ((tis  & tic)  & BIT(q))) {
 		if (napi_schedule_prep(&priv->napi[q])) {
 			/* Mask RX and TX interrupts */
-			if (!info->multi_irqs) {
+			if (!info->irq_en_dis) {
 				ravb_write(ndev, ric0 & ~BIT(q), RIC0);
 				ravb_write(ndev, tic & ~BIT(q), TIC);
 			} else {
@@ -1306,7 +1306,7 @@ static int ravb_poll(struct napi_struct *napi, int budget)
 
 	/* Re-enable RX/TX interrupts */
 	spin_lock_irqsave(&priv->lock, flags);
-	if (!info->multi_irqs) {
+	if (!info->irq_en_dis) {
 		ravb_modify(ndev, RIC0, mask, mask);
 		ravb_modify(ndev, TIC,  mask, mask);
 	} else {
@@ -2410,6 +2410,7 @@ static const struct ravb_hw_info ravb_gen3_hw_info = {
 	.internal_delay = 1,
 	.tx_counters = 1,
 	.multi_irqs = 1,
+	.irq_en_dis = 1,
 	.ccc_gac = 1,
 	.nc_queues = 1,
 	.magic_pkt = 1,

drivers/net/ethernet/renesas/ravb_ptp.c

@@ -198,7 +198,7 @@ static int ravb_ptp_extts(struct ptp_clock_info *ptp,
 	priv->ptp.extts[req->index] = on;
 
 	spin_lock_irqsave(&priv->lock, flags);
-	if (!info->multi_irqs)
+	if (!info->irq_en_dis)
 		ravb_modify(ndev, GIC, GIC_PTCE, on ? GIC_PTCE : 0);
 	else if (on)
 		ravb_write(ndev, GIE_PTCS, GIE);
@@ -254,7 +254,7 @@ static int ravb_ptp_perout(struct ptp_clock_info *ptp,
 		error = ravb_ptp_update_compare(priv, (u32)start_ns);
 		if (!error) {
 			/* Unmask interrupt */
-			if (!info->multi_irqs)
+			if (!info->irq_en_dis)
 				ravb_modify(ndev, GIC, GIC_PTME, GIC_PTME);
 			else
 				ravb_write(ndev, GIE_PTMS0, GIE);
@@ -266,7 +266,7 @@ static int ravb_ptp_perout(struct ptp_clock_info *ptp,
 		perout->period = 0;
 
 		/* Mask interrupt */
-		if (!info->multi_irqs)
+		if (!info->irq_en_dis)
 			ravb_modify(ndev, GIC, GIC_PTME, 0);
 		else
 			ravb_write(ndev, GID_PTMD0, GID);