Merge tag 'efi-urgent' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/mfleming/efi into efi/urgent

 * Make for_each_efi_memory_desc_in_map() safe on Xen and prevent an
   infinte loop - Jan Beulich

 * Fix boot error on arm64 Qualcomm platforms by refactoring and
   improving the ExitBootServices() hack we already for x86 and moving
   it to the libstub - Jeffrey Hugo

 * Use correct return data type for of_get_flat_dt_subnode_by_name()
   so that we correctly handle errors - Andrzej Hajda

.mailmap

@@ -158,6 +158,8 @@ Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
+Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
 Takashi YOSHII <takashi.yoshii.zj@renesas.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>

Documentation/ABI/stable/sysfs-devices

@@ -1,7 +1,7 @@
 # Note: This documents additional properties of any device beyond what
 # is documented in Documentation/sysfs-rules.txt
 
-What:		/sys/devices/*/of_path
+What:		/sys/devices/*/of_node
 Date:		February 2015
 Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
 Description:

Documentation/PCI/MSI-HOWTO.txt

@@ -94,14 +94,11 @@ has a requirements for a minimum number of vectors the driver can pass a
 min_vecs argument set to this limit, and the PCI core will return -ENOSPC
 if it can't meet the minimum number of vectors.
 
-The flags argument should normally be set to 0, but can be used to pass the
-PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
-MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
-case the device does not support legacy interrupt lines.
-
-By default this function will spread the interrupts around the available
-CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
-flag.
+The flags argument is used to specify which type of interrupt can be used
+by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
+A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
+any possible kind of interrupt.  If the PCI_IRQ_AFFINITY flag is set,
+pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.
 
 To get the Linux IRQ numbers passed to request_irq() and free_irq() and the
 vectors, use the following function:
@@ -131,7 +128,7 @@ larger than the number supported by the device it will automatically be
 capped to the supported limit, so there is no need to query the number of
 vectors supported beforehand:
 
-	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0);
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_ALL_TYPES)
 	if (nvec < 0)
 		goto out_err;
 
@@ -140,23 +137,22 @@ interrupts it can request a particular number of interrupts by passing that
 number to pci_alloc_irq_vectors() function as both 'min_vecs' and
 'max_vecs' parameters:
 
-	ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0);
+	ret = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		goto out_err;
 
 The most notorious example of the request type described above is enabling
 the single MSI mode for a device.  It could be done by passing two 1s as
 'min_vecs' and 'max_vecs':
 
-	ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
 	if (ret < 0)
 		goto out_err;
 
 Some devices might not support using legacy line interrupts, in which case
-the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform
-can't provide MSI or MSI-X interrupts:
+the driver can specify that only MSI or MSI-X is acceptable:
 
-	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY);
+	nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_MSI | PCI_IRQ_MSIX);
 	if (nvec < 0)
 		goto out_err;
 

Documentation/PCI/pci.txt

@@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver
 
 The ID table is an array of struct pci_device_id entries ending with an
 all-zero entry.  Definitions with static const are generally preferred.
-Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
 
 Each entry consists of:
 

Documentation/arm64/silicon-errata.txt

@@ -53,6 +53,7 @@ stable kernels.
 | ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
 | ARM            | Cortex-A57      | #852523         | N/A                     |
 | ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
+| ARM            | Cortex-A72      | #853709         | N/A                     |
 | ARM            | MMU-500         | #841119,#826419 | N/A                     |
 |                |                 |                 |                         |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |

Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt

@@ -16,13 +16,20 @@ Required properties:
 - vref-supply: The regulator supply ADC reference voltage.
 - #io-channel-cells: Should be 1, see ../iio-bindings.txt
 
+Optional properties:
+- resets: Must contain an entry for each entry in reset-names if need support
+	  this option. See ../reset/reset.txt for details.
+- reset-names: Must include the name "saradc-apb".
+
 Example:
 	saradc: saradc@2006c000 {
 		compatible = "rockchip,saradc";
 		reg = <0x2006c000 0x100>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 		clock-names = "saradc", "apb_pclk";
+		resets = <&cru SRST_SARADC>;
+		reset-names = "saradc-apb";
 		#io-channel-cells = <1>;
 		vref-supply = <&vcc18>;
 	};

Documentation/devicetree/bindings/serial/8250.txt

@@ -42,9 +42,6 @@ Optional properties:
 - auto-flow-control: one way to enable automatic flow control support. The
   driver is allowed to detect support for the capability even without this
   property.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified GPIO instead of the peripheral
-  function pin for the UART feature. If unsure, don't specify this property.
 
 Note:
 * fsl,ns16550:
@@ -66,19 +63,3 @@ Example:
 		interrupts = <10>;
 		reg-shift = <2>;
 	};
-
-Example for OMAP UART using GPIO-based modem control signals:
-
-	uart4: serial@49042000 {
-		compatible = "ti,omap3-uart";
-		reg = <0x49042000 0x400>;
-		interrupts = <80>;
-		ti,hwmods = "uart4";
-		clock-frequency = <48000000>;
-		cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-		rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
-		dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-		rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	};

Documentation/devicetree/bindings/sound/omap-mcpdm.txt

@@ -8,8 +8,6 @@ Required properties:
 - interrupts: Interrupt number for McPDM
 - interrupt-parent: The parent interrupt controller
 - ti,hwmods: Name of the hwmod associated to the McPDM
-- clocks:  phandle for the pdmclk provider, likely <&twl6040>
-- clock-names: Must be "pdmclk"
 
 Example:
 
@@ -21,11 +19,3 @@ mcpdm: mcpdm@40132000 {
 	interrupt-parent = <&gic>;
 	ti,hwmods = "mcpdm";
 };
-
-In board DTS file the pdmclk needs to be added:
-
-&mcpdm {
-	clocks = <&twl6040>;
-	clock-names = "pdmclk";
-	status = "okay";
-};

Documentation/devicetree/bindings/thermal/thermal.txt

@@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below.
 Required properties:
 - #cooling-cells:	Used to provide cooling device specific information
   Type: unsigned	while referring to it. Must be at least 2, in order
-  Size: one cell      	to specify minimum and maximum cooling state used
+  Size: one cell	to specify minimum and maximum cooling state used
 			in the reference. The first cell is the minimum
 			cooling state requested and the second cell is
 			the maximum cooling state requested in the reference.
@@ -119,7 +119,7 @@ Required properties:
 Optional property:
 - contribution:		The cooling contribution to the thermal zone of the
   Type: unsigned	referred cooling device at the referred trip point.
-  Size: one cell      	The contribution is a ratio of the sum
+  Size: one cell	The contribution is a ratio of the sum
 			of all cooling contributions within a thermal zone.
 
 Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
@@ -145,7 +145,7 @@ Required properties:
   Size: one cell
 
 - thermal-sensors:	A list of thermal sensor phandles and sensor specifier
-  Type: list of 	used while monitoring the thermal zone.
+  Type: list of		used while monitoring the thermal zone.
   phandles + sensor
   specifier
 
@@ -473,7 +473,7 @@ thermal-zones {
 				  <&adc>;	/* pcb north */
 
 		/* hotspot = 100 * bandgap - 120 * adc + 484 */
-		coefficients = 		<100	-120	484>;
+		coefficients =		<100	-120	484>;
 
 		trips {
 			...
@@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
         thermal-sensors =  <&adc>;
 
 		/* hotspot = 1 * adc + 6000 */
-	coefficients = 		<1	6000>;
+	coefficients =		<1	6000>;
 
 (d) - Board thermal
 

Documentation/filesystems/overlayfs.txt

@@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and
 moves it over to the old name.  The new file may be on a different
 filesystem, so both st_dev and st_ino of the file may change.
 
-Any open files referring to this inode will access the old data and
-metadata.  Similarly any file locks obtained before copy_up will not
-apply to the copied up file.
+Any open files referring to this inode will access the old data.
 
-On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
-fsetxattr(2) will fail with EROFS.
+Any file locks (and leases) obtained before copy_up will not apply
+to the copied up file.
 
 If a file with multiple hard links is copied up, then this will
 "break" the link.  Changes will not be propagated to other names

Documentation/kernel-parameters.txt

@@ -3032,6 +3032,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 				PAGE_SIZE is used as alignment.
 				PCI-PCI bridge can be specified, if resource
 				windows need to be expanded.
+				To specify the alignment for several
+				instances of a device, the PCI vendor,
+				device, subvendor, and subdevice may be
+				specified, e.g., 4096@pci:8086:9c22:103c:198f
 		ecrc=		Enable/disable PCIe ECRC (transaction layer
 				end-to-end CRC checking).
 				bios: Use BIOS/firmware settings. This is the

Documentation/networking/dsa/dsa.txt

@@ -587,26 +587,6 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device.
 TODO
 ====
 
-The platform device problem
----------------------------
-DSA is currently implemented as a platform device driver which is far from ideal
-as was discussed in this thread:
-
-http://permalink.gmane.org/gmane.linux.network/329848
-
-This basically prevents the device driver model to be properly used and applied,
-and support non-MDIO, non-MMIO Ethernet connected switches.
-
-Another problem with the platform device driver approach is that it prevents the
-use of a modular switch drivers build due to a circular dependency, illustrated
-here:
-
-http://comments.gmane.org/gmane.linux.network/345803
-
-Attempts of reworking this has been done here:
-
-https://lwn.net/Articles/643149/
-
 Making SWITCHDEV and DSA converge towards an unified codebase
 -------------------------------------------------------------
 

Documentation/powerpc/transactional_memory.txt

@@ -167,6 +167,8 @@ signal will be rolled back anyway.
 For signals taken in non-TM or suspended mode, we use the
 normal/non-checkpointed stack pointer.
 
+Any transaction initiated inside a sighandler and suspended on return
+from the sighandler to the kernel will get reclaimed and discarded.
 
 Failure cause codes used by kernel
 ==================================

Documentation/rapidio/mport_cdev.txt

@@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver:
 
 III. Module parameters
 
+- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
+        This parameter set a maximum completion wait time for SYNC mode DMA
+        transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
+
 - 'dbg_level' - This parameter allows to control amount of debug information
         generated by this device driver. This parameter is formed by set of
         bit masks that correspond to the specific functional blocks.

MAINTAINERS

@@ -798,6 +798,7 @@ M:	Laura Abbott <labbott@redhat.com>
 M:	Sumit Semwal <sumit.semwal@linaro.org>
 L:	devel@driverdev.osuosl.org
 S:	Supported
+F:	Documentation/devicetree/bindings/staging/ion/
 F:	drivers/staging/android/ion
 F:	drivers/staging/android/uapi/ion.h
 F:	drivers/staging/android/uapi/ion_test.h
@@ -881,6 +882,15 @@ S:	Supported
 F:	drivers/gpu/drm/arc/
 F:	Documentation/devicetree/bindings/display/snps,arcpgu.txt
 
+ARM ARCHITECTED TIMER DRIVER
+M:	Mark Rutland <mark.rutland@arm.com>
+M:	Marc Zyngier <marc.zyngier@arm.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/include/asm/arch_timer.h
+F:	arch/arm64/include/asm/arch_timer.h
+F:	drivers/clocksource/arm_arch_timer.c
+
 ARM HDLCD DRM DRIVER
 M:	Liviu Dudau <liviu.dudau@arm.com>
 S:	Supported
@@ -3238,7 +3248,7 @@ F:	kernel/cpuset.c
 CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
 M:	Johannes Weiner <hannes@cmpxchg.org>
 M:	Michal Hocko <mhocko@kernel.org>
-M:	Vladimir Davydov <vdavydov@virtuozzo.com>
+M:	Vladimir Davydov <vdavydov.dev@gmail.com>
 L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
@@ -7661,7 +7671,7 @@ L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home
 Q:	http://patchwork.kernel.org/project/linux-rdma/list/
-F:	drivers/infiniband/hw/rxe/
+F:	drivers/infiniband/sw/rxe/
 F:	include/uapi/rdma/rdma_user_rxe.h
 
 MEMBARRIER SUPPORT
@@ -11223,12 +11233,8 @@ S:	Odd Fixes
 F:	drivers/staging/vt665?/
 
 STAGING - WILC1000 WIFI DRIVER
-M:	Johnny Kim <johnny.kim@atmel.com>
-M:	Austin Shin <austin.shin@atmel.com>
-M:	Chris Park <chris.park@atmel.com>
-M:	Tony Cho <tony.cho@atmel.com>
-M:	Glen Lee <glen.lee@atmel.com>
-M:	Leo Kim <leo.kim@atmel.com>
+M:	Aditya Shankar <aditya.shankar@microchip.com>
+M:	Ganesh Krishna <ganesh.krishna@microchip.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
 F:	drivers/staging/wilc1000/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Psychotic Stoned Sheep
 
 # *DOCUMENTATION*

arch/arc/include/asm/entry.h

@@ -142,7 +142,7 @@
 
 #ifdef CONFIG_ARC_CURR_IN_REG
 	; Retrieve orig r25 and save it with rest of callee_regs
-	ld.as   r12, [r12, PT_user_r25]
+	ld	r12, [r12, PT_user_r25]
 	PUSH	r12
 #else
 	PUSH	r25
@@ -198,7 +198,7 @@
 
 	; SP is back to start of pt_regs
 #ifdef CONFIG_ARC_CURR_IN_REG
-	st.as   r12, [sp, PT_user_r25]
+	st	r12, [sp, PT_user_r25]
 #endif
 .endm
 

arch/arc/include/asm/irqflags-compact.h

@@ -188,10 +188,10 @@ static inline int arch_irqs_disabled(void)
 .endm
 
 .macro IRQ_ENABLE  scratch
+	TRACE_ASM_IRQ_ENABLE
 	lr	\scratch, [status32]
 	or	\scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
 	flag	\scratch
-	TRACE_ASM_IRQ_ENABLE
 .endm
 
 #endif	/* __ASSEMBLY__ */

arch/arc/include/asm/pgtable.h

@@ -280,7 +280,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 
 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	(__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
 
 /* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)