Merge branches 'arm/msm', 'arm/allwinner', 'arm/smmu', 'x86/vt-d', 'h…

…yper-v', 'core' and 'x86/amd' into next

Documentation/devicetree/bindings/iommu/allwinner,sun50i-h6-iommu.yaml

@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iommu/allwinner,sun50i-h6-iommu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner H6 IOMMU Device Tree Bindings
+
+maintainers:
+  - Chen-Yu Tsai <wens@csie.org>
+  - Maxime Ripard <mripard@kernel.org>
+
+properties:
+  "#iommu-cells":
+    const: 1
+    description:
+      The content of the cell is the master ID.
+
+  compatible:
+    const: allwinner,sun50i-h6-iommu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+required:
+  - "#iommu-cells"
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/interrupt-controller/arm-gic.h>
+      #include <dt-bindings/interrupt-controller/irq.h>
+
+      #include <dt-bindings/clock/sun50i-h6-ccu.h>
+      #include <dt-bindings/reset/sun50i-h6-ccu.h>
+
+      iommu: iommu@30f0000 {
+          compatible = "allwinner,sun50i-h6-iommu";
+          reg = <0x030f0000 0x10000>;
+          interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+          clocks = <&ccu CLK_BUS_IOMMU>;
+          resets = <&ccu RST_BUS_IOMMU>;
+          #iommu-cells = <1>;
+      };
+
+...

Documentation/devicetree/bindings/iommu/arm,smmu.yaml

@@ -41,7 +41,9 @@ properties:
           - const: arm,mmu-500
           - const: arm,smmu-v2
       - items:
-          - const: arm,mmu-401
+          - enum:
+              - arm,mmu-400
+              - arm,mmu-401
           - const: arm,smmu-v1
       - enum:
           - arm,smmu-v1

Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt

@@ -184,6 +184,9 @@ For the compatible strings below the following phandle references are required:
 		    followed by the offset within syscon for conn_box_spare0
 		    register.
 
+The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
+on platforms which do not have TrustZone.
+
 = SUBNODES:
 The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
 the memory regions used by the Hexagon firmware. Each sub-node must contain:

arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi

@@ -631,6 +631,11 @@ ap_ts_i2c: &i2c14 {
 	status = "okay";
 };
 
+&mss_pil {
+	iommus = <&apps_smmu 0x780 0x1>,
+		 <&apps_smmu 0x724 0x3>;
+};
+
 &pm8998_pwrkey {
 	status = "disabled";
 };

drivers/iommu/Kconfig

@@ -303,6 +303,15 @@ config ROCKCHIP_IOMMU
 	  Say Y here if you are using a Rockchip SoC that includes an IOMMU
 	  device.
 
+config SUN50I_IOMMU
+	bool "Allwinner H6 IOMMU Support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	select ARM_DMA_USE_IOMMU
+	select IOMMU_API
+	select IOMMU_DMA
+	help
+	  Support for the IOMMU introduced in the Allwinner H6 SoCs.
+
 config TEGRA_IOMMU_GART
 	bool "Tegra GART IOMMU Support"
 	depends on ARCH_TEGRA_2x_SOC

drivers/iommu/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_MTK_IOMMU_V1) += mtk_iommu_v1.o
 obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o
 obj-$(CONFIG_OMAP_IOMMU_DEBUG) += omap-iommu-debug.o
 obj-$(CONFIG_ROCKCHIP_IOMMU) += rockchip-iommu.o
+obj-$(CONFIG_SUN50I_IOMMU) += sun50i-iommu.o
 obj-$(CONFIG_TEGRA_IOMMU_GART) += tegra-gart.o
 obj-$(CONFIG_TEGRA_IOMMU_SMMU) += tegra-smmu.o
 obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o