Merge 4.0-rc5 into usb-next

We want the USB fixes in here as well to resolve merge conflicts.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/arm/exynos/power_domain.txt

@@ -22,6 +22,8 @@ Optional Properties:
 	- pclkN, clkN: Pairs of parent of input clock and input clock to the
 		devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
 		are supported currently.
+- power-domains: phandle pointing to the parent power domain, for more details
+		 see Documentation/devicetree/bindings/power/power_domain.txt
 
 Node of a device using power domains must have a power-domains property
 defined with a phandle to respective power domain.

Documentation/devicetree/bindings/arm/sti.txt

@@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih407";
 
+Boards with the ST STiH410 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih410";
+
 Boards with the ST STiH418 SoC shall have the following properties:
 Required root node property:
 compatible = "st,stih418";

Documentation/devicetree/bindings/net/apm-xgene-enet.txt

@@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
 APM X-Gene SoC.
 
 Required properties for all the ethernet interfaces:
-- compatible: Should be "apm,xgene-enet"
+- compatible: Should state binding information from the following list,
+  - "apm,xgene-enet":    RGMII based 1G interface
+  - "apm,xgene1-sgenet": SGMII based 1G interface
+  - "apm,xgene1-xgenet": XFI based 10G interface
 - reg: Address and length of the register set for the device. It contains the
   information of registers in the same order as described by reg-names
 - reg-names: Should contain the register set names

Documentation/devicetree/bindings/power/power_domain.txt

@@ -19,6 +19,16 @@ Required properties:
    providing multiple PM domains (e.g. power controllers), but can be any value
    as specified by device tree binding documentation of particular provider.
 
+Optional properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+                   the power controller specified by phandle.
+   Some power domains might be powered from another power domain (or have
+   other hardware specific dependencies). For representing such dependency
+   a standard PM domain consumer binding is used. When provided, all domains
+   created by the given provider should be subdomains of the domain
+   specified by this binding. More details about power domain specifier are
+   available in the next section.
+
 Example:
 
 	power: power-controller@12340000 {
@@ -30,6 +40,25 @@ Example:
 The node above defines a power controller that is a PM domain provider and
 expects one cell as its phandle argument.
 
+Example 2:
+
+	parent: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12340000 0x1000>;
+		#power-domain-cells = <1>;
+	};
+
+	child: power-controller@12340000 {
+		compatible = "foo,power-controller";
+		reg = <0x12341000 0x1000>;
+		power-domains = <&parent 0>;
+		#power-domain-cells = <1>;
+	};
+
+The nodes above define two power controllers: 'parent' and 'child'.
+Domains created by the 'child' power controller are subdomains of '0' power
+domain provided by the 'parent' power controller.
+
 ==PM domain consumers==
 
 Required properties:

Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt

@@ -0,0 +1,19 @@
+ETRAX FS UART
+
+Required properties:
+- compatible : "axis,etraxfs-uart"
+- reg: offset and length of the register set for the device.
+- interrupts: device interrupt
+
+Optional properties:
+- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+  line respectively.
+
+Example:
+
+serial@b00260000 {
+	compatible = "axis,etraxfs-uart";
+	reg = <0xb0026000 0x1000>;
+	interrupts = <68>;
+	status = "disabled";
+};

Documentation/devicetree/bindings/submitting-patches.txt

@@ -12,6 +12,9 @@ I. For patch submitters
 
        devicetree@vger.kernel.org
 
+     and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
+     all of the DT maintainers.
+
   3) The Documentation/ portion of the patch should come in the series before
      the code implementing the binding.
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -20,13 +20,15 @@ amlogic	Amlogic, Inc.
 ams	AMS AG
 amstaos	AMS-Taos Inc.
 apm	Applied Micro Circuits Corporation (APM)
+arasan	Arasan Chip Systems
 arm	ARM Ltd.
 armadeus	ARMadeus Systems SARL
 asahi-kasei	Asahi Kasei Corp.
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
+axis	Axis Communications AB
 bosch	Bosch Sensortec GmbH
 brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.

Documentation/devicetree/bindings/watchdog/atmel-wdt.txt

@@ -26,6 +26,11 @@ Optional properties:
 - atmel,disable : Should be present if you want to disable the watchdog.
 - atmel,idle-halt : Should be present if you want to stop the watchdog when
 	entering idle state.
+	CAUTION: This property should be used with care, it actually makes the
+	watchdog not counting when the CPU is in idle state, therefore the
+	watchdog reset time depends on mean CPU usage and will not reset at all
+	if the CPU stop working while it is in idle state, which is probably
+	not what you want.
 - atmel,dbg-halt : Should be present if you want to stop the watchdog when
 	entering debug state.
 

MAINTAINERS

@@ -1030,6 +1030,16 @@ F:	arch/arm/mach-mxs/
 F:	arch/arm/boot/dts/imx*
 F:	arch/arm/configs/imx*_defconfig
 
+ARM/FREESCALE VYBRID ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
+M:	Sascha Hauer <kernel@pengutronix.de>
+R:	Stefan Agner <stefan@agner.ch>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
+F:	arch/arm/mach-imx/*vf610*
+F:	arch/arm/boot/dts/vf*
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1188,6 +1198,7 @@ ARM/Marvell Dove/MV78xx0/Orion SOC support
 M:	Jason Cooper <jason@lakedaemon.net>
 M:	Andrew Lunn <andrew@lunn.ch>
 M:	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+M:	Gregory Clement <gregory.clement@free-electrons.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-dove/
@@ -1730,7 +1741,7 @@ S:	Maintained
 F:	drivers/net/ethernet/atheros/
 
 ATM
-M:	Chas Williams <chas@cmf.nrl.navy.mil>
+M:	Chas Williams <3chas3@gmail.com>
 L:	linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
@@ -2107,7 +2118,6 @@ F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
-M:	Matt Porter <mporter@linaro.org>
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://github.com/broadcom/mach-bcm
@@ -2369,8 +2379,9 @@ F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
 M:	Oliver Hartkopp <socketcan@hartkopp.net>
+M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
-W:	http://gitorious.org/linux-can
+W:	https://github.com/linux-can
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
@@ -2386,7 +2397,7 @@ CAN NETWORK DRIVERS
 M:	Wolfgang Grandegger <wg@grandegger.com>
 M:	Marc Kleine-Budde <mkl@pengutronix.de>
 L:	linux-can@vger.kernel.org
-W:	http://gitorious.org/linux-can
+W:	https://github.com/linux-can
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next.git
 S:	Maintained
@@ -10196,6 +10207,13 @@ S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
+USB OTG FSM (Finite State Machine)
+M:	Peter Chen <Peter.Chen@freescale.com>
+T:	git git://github.com/hzpeterchen/linux-usb.git
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/usb/common/usb-otg-fsm.c
+
 USB OVER IP DRIVER
 M:	Valentina Manea <valentina.manea.m@gmail.com>
 M:	Shuah Khan <shuah.kh@samsung.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc5
 NAME = Hurr durr I'ma sheep
 
 # *DOCUMENTATION*

arch/arm/Makefile

@@ -150,6 +150,7 @@ machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
 machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
+machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EFM32)		+= efm32

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -301,3 +301,11 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	cd-inverted;
 };
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};

arch/arm/boot/dts/am335x-bone.dts

@@ -24,11 +24,3 @@
 &mmc1 {
 	vmmc-supply = <&ldo3_reg>;
 };
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};

arch/arm/boot/dts/am335x-lxm.dts

@@ -328,6 +328,10 @@
 	dual_emac_res_vlan = <3>;
 };
 
+&phy_sel {
+	rmii-clock-ext;
+};
+
 &mac {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;

arch/arm/boot/dts/am33xx-clocks.dtsi

@@ -99,23 +99,23 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};

arch/arm/boot/dts/am43xx-clocks.dtsi

@@ -107,47 +107,47 @@
 	ehrpwm0_tbclk: ehrpwm0_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm1_tbclk: ehrpwm1_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm2_tbclk: ehrpwm2_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm3_tbclk: ehrpwm3_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm4_tbclk: ehrpwm4_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
 
 	ehrpwm5_tbclk: ehrpwm5_tbclk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_m2_ck>;
+		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};

arch/arm/boot/dts/at91sam9260.dtsi

@@ -494,12 +494,12 @@
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC8 periph B */
+							<AT91_PIOC 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PC10 periph B */
+							<AT91_PIOC 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -853,7 +853,7 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
 				clocks = <&udc_clk>, <&udpck>;
@@ -976,7 +976,6 @@
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
-				atmel,idle-halt;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/at91sam9261.dtsi

@@ -124,11 +124,12 @@
 			};
 
 			usb1: gadget@fffa4000 {
-				compatible = "atmel,at91rm9200-udc";
+				compatible = "atmel,at91sam9261-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&usb>, <&udc_clk>, <&udpck>;
-				clock-names = "usb_clk", "udc_clk", "udpck";
+				clocks = <&udc_clk>, <&udpck>;
+				clock-names = "pclk", "hclk";
+				atmel,matrix = <&matrix>;
 				status = "disabled";
 			};
 
@@ -262,7 +263,7 @@
 			};
 
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix";
+				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};