Merge tag 'v4.13-rc7' into for-4.14/block-postmerge

Linux 4.13-rc7 Signed-off-by: Jens Axboe <axboe@kernel.dk>
mariux64 · Aug 28, 2017 · cd996fb · cd996fb
2 parents e9a823f + cc4a41f
commit cd996fb
Show file tree

Hide file tree

Showing 1,034 changed files with 15,391 additions and 18,233 deletions.
diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
@@ -237,6 +237,14 @@ are the following:
 	This attribute is not present if the scaling driver in use does not
 	support it.
 
+``cpuinfo_cur_freq``
+	Current frequency of the CPUs belonging to this policy as obtained from
+	the hardware (in KHz).
+
+	This is expected to be the frequency the hardware actually runs at.
+	If that frequency cannot be determined, this attribute should not
+	be present.
+
 ``cpuinfo_max_freq``
 	Maximum possible operating frequency the CPUs belonging to this policy
 	can run at (in kHz).

diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -1,22 +1,30 @@
 * Renesas R-Car SATA
 
 Required properties:
-- compatible		: should contain one of the following:
+- compatible		: should contain one or more of the following:
 			  - "renesas,sata-r8a7779" for R-Car H1
-			    ("renesas,rcar-sata" is deprecated)
 			  - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
 			  - "renesas,sata-r8a7790" for R-Car H2 other than ES1
 			  - "renesas,sata-r8a7791" for R-Car M2-W
 			  - "renesas,sata-r8a7793" for R-Car M2-N
 			  - "renesas,sata-r8a7795" for R-Car H3
+			  - "renesas,rcar-gen2-sata" for a generic R-Car Gen2 compatible device
+			  - "renesas,rcar-gen3-sata" for a generic R-Car Gen3 compatible device
+			  - "renesas,rcar-sata" is deprecated
+
+			  When compatible with the generic version nodes
+			  must list the SoC-specific version corresponding
+			  to the platform first followed by the generic
+			  version.
+
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
 - clocks		: must contain a reference to the functional clock.
 
 Example:
 
 sata0: sata@ee300000 {
-	compatible = "renesas,sata-r8a7791";
+	compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata";
 	reg = <0 0xee300000 0 0x2000>;
 	interrupt-parent = <&gic>;
 	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;

diff --git a/Documentation/devicetree/bindings/gpio/gpio-exar.txt b/Documentation/devicetree/bindings/gpio/gpio-exar.txt
@@ -0,0 +1,5 @@
+Exportable MPIO interface of Exar UART chips
+
+Required properties of the device:
+ - exar,first-pin: first exportable pins (0..15)
+ - ngpios: number of exportable pins (1..16)
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt
@@ -40,7 +40,7 @@ Optional properties:
 Example for a Mali-T760:
 
 gpu@ffa30000 {
-	compatible = "rockchip,rk3288-mali", "arm,mali-t760", "arm,mali-midgard";
+	compatible = "rockchip,rk3288-mali", "arm,mali-t760";
 	reg = <0xffa30000 0x10000>;
 	interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
 		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,

diff --git a/Documentation/fb/efifb.txt b/Documentation/fb/efifb.txt
@@ -27,5 +27,11 @@ You have to add the following kernel parameters in your elilo.conf:
 	Macbook Pro 17", iMac 20" :
 		video=efifb:i20
 
+Accepted options:
+
+nowc	Don't map the framebuffer write combined. This can be used
+	to workaround side-effects and slowdowns on other CPU cores
+	when large amounts of console data are written.
+
 --
 Edgar Hucek <gimli@dark-green.com>
diff --git a/Documentation/gpio/gpio-legacy.txt b/Documentation/gpio/gpio-legacy.txt
@@ -459,7 +459,7 @@ pin controller?
 
 This is done by registering "ranges" of pins, which are essentially
 cross-reference tables. These are described in
-Documentation/pinctrl.txt
+Documentation/driver-api/pinctl.rst
 
 While the pin allocation is totally managed by the pinctrl subsystem,
 gpio (under gpiolib) is still maintained by gpio drivers. It may happen