i2c: i801: add Intel Lewisburg device IDs

Adding Intel codename Lewisburg platform device IDs for SMBus.

Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Documentation/i2c/busses/i2c-i801

@@ -32,6 +32,7 @@ Supported adapters:
   * Intel Sunrise Point-LP (PCH)
   * Intel DNV (SOC)
   * Intel Broxton (SOC)
+  * Intel Lewisburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

drivers/i2c/busses/Kconfig

@@ -126,6 +126,7 @@ config I2C_I801
 	    Sunrise Point-LP (PCH)
 	    DNV (SOC)
 	    Broxton (SOC)
+	    Lewisburg (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.

drivers/i2c/busses/i2c-i801.c

@@ -62,6 +62,8 @@
  * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
  * DNV (SOC)			0x19df	32	hard	yes	yes	yes
  * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
+ * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
+ * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -206,6 +208,8 @@
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
+#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -869,6 +873,8 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
 	{ 0, }
 };