Merge back cpufreq material for 6.3-rc1.

Documentation/admin-guide/kernel-parameters.txt

@@ -7020,3 +7020,10 @@
 			  management firmware translates the requests into actual
 			  hardware states (core frequency, data fabric and memory
 			  clocks etc.)
+			active
+			  Use amd_pstate_epp driver instance as the scaling driver,
+			  driver provides a hint to the hardware if software wants
+			  to bias toward performance (0x0) or energy efficiency (0xff)
+			  to the CPPC firmware. then CPPC power algorithm will
+			  calculate the runtime workload and adjust the realtime cores
+			  frequency.

Documentation/admin-guide/pm/amd-pstate.rst

@@ -262,6 +262,25 @@ lowest non-linear performance in `AMD CPPC Performance Capability
 <perf_cap_>`_.)
 This attribute is read-only.
 
+``energy_performance_available_preferences``
+
+A list of all the supported EPP preferences that could be used for
+``energy_performance_preference`` on this system.
+These profiles represent different hints that are provided
+to the low-level firmware about the user's desired energy vs efficiency
+tradeoff.  ``default`` represents the epp value is set by platform
+firmware. This attribute is read-only.
+
+``energy_performance_preference``
+
+The current energy performance preference can be read from this attribute.
+and user can change current preference according to energy or performance needs
+Please get all support profiles list from
+``energy_performance_available_preferences`` attribute, all the profiles are
+integer values defined between 0 to 255 when EPP feature is enabled by platform
+firmware, if EPP feature is disabled, driver will ignore the written value
+This attribute is read-write.
+
 Other performance and frequency values can be read back from
 ``/sys/devices/system/cpu/cpuX/acpi_cppc/``, see :ref:`cppc_sysfs`.
 
@@ -280,8 +299,30 @@ module which supports the new AMD P-States mechanism on most of the future AMD
 platforms. The AMD P-States mechanism is the more performance and energy
 efficiency frequency management method on AMD processors.
 
-Kernel Module Options for ``amd-pstate``
-=========================================
+
+AMD Pstate Driver Operation Modes
+=================================
+
+``amd_pstate`` CPPC has two operation modes: CPPC Autonomous(active) mode and
+CPPC non-autonomous(passive) mode.
+active mode and passive mode can be chosen by different kernel parameters.
+When in Autonomous mode, CPPC ignores requests done in the Desired Performance
+Target register and takes into account only the values set to the Minimum requested
+performance, Maximum requested performance, and Energy Performance Preference
+registers. When Autonomous is disabled, it only considers the Desired Performance Target.
+
+Active Mode
+------------
+
+``amd_pstate=active``
+
+This is the low-level firmware control mode which is implemented by ``amd_pstate_epp``
+driver with ``amd_pstate=active`` passed to the kernel in the command line.
+In this mode, ``amd_pstate_epp`` driver provides a hint to the hardware if software
+wants to bias toward performance (0x0) or energy efficiency (0xff) to the CPPC firmware.
+then CPPC power algorithm will calculate the runtime workload and adjust the realtime
+cores frequency according to the power supply and thermal, core voltage and some other
+hardware conditions.
 
 Passive Mode
 ------------
@@ -298,6 +339,35 @@ processor must provide at least nominal performance requested and go higher if c
 operating conditions allow.
 
 
+User Space Interface in ``sysfs``
+=================================
+
+Global Attributes
+-----------------
+
+``amd-pstate`` exposes several global attributes (files) in ``sysfs`` to
+control its functionality at the system level.  They are located in the
+``/sys/devices/system/cpu/amd-pstate/`` directory and affect all CPUs.
+
+``status``
+	Operation mode of the driver: "active", "passive" or "disable".
+
+	"active"
+		The driver is functional and in the ``active mode``
+
+	"passive"
+		The driver is functional and in the ``passive mode``
+
+	"disable"
+		The driver is unregistered and not functional now.
+
+        This attribute can be written to in order to change the driver's
+        operation mode or to unregister it.  The string written to it must be
+        one of the possible values of it and, if successful, writing one of
+        these values to the sysfs file will cause the driver to switch over
+        to the operation mode represented by that string - or to be
+        unregistered in the "disable" case.
+
 ``cpupower`` tool support for ``amd-pstate``
 ===============================================
 

drivers/acpi/cppc_acpi.c

@@ -1153,6 +1153,19 @@ int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
 	return cppc_get_perf(cpunum, NOMINAL_PERF, nominal_perf);
 }
 
+/**
+ * cppc_get_epp_perf - Get the epp register value.
+ * @cpunum: CPU from which to get epp preference value.
+ * @epp_perf: Return address.
+ *
+ * Return: 0 for success, -EIO otherwise.
+ */
+int cppc_get_epp_perf(int cpunum, u64 *epp_perf)
+{
+	return cppc_get_perf(cpunum, ENERGY_PERF, epp_perf);
+}
+EXPORT_SYMBOL_GPL(cppc_get_epp_perf);
+
 /**
  * cppc_get_perf_caps - Get a CPU's performance capabilities.
  * @cpunum: CPU from which to get capabilities info.
@@ -1365,6 +1378,60 @@ int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
 }
 EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
 
+/*
+ * Set Energy Performance Preference Register value through
+ * Performance Controls Interface
+ */
+int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable)
+{
+	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
+	struct cpc_register_resource *epp_set_reg;
+	struct cpc_register_resource *auto_sel_reg;
+	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
+	struct cppc_pcc_data *pcc_ss_data = NULL;
+	int ret;
+
+	if (!cpc_desc) {
+		pr_debug("No CPC descriptor for CPU:%d\n", cpu);
+		return -ENODEV;
+	}
+
+	auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
+	epp_set_reg = &cpc_desc->cpc_regs[ENERGY_PERF];
+
+	if (CPC_IN_PCC(epp_set_reg) || CPC_IN_PCC(auto_sel_reg)) {
+		if (pcc_ss_id < 0) {
+			pr_debug("Invalid pcc_ss_id for CPU:%d\n", cpu);
+			return -ENODEV;
+		}
+
+		if (CPC_SUPPORTED(auto_sel_reg)) {
+			ret = cpc_write(cpu, auto_sel_reg, enable);
+			if (ret)
+				return ret;
+		}
+
+		if (CPC_SUPPORTED(epp_set_reg)) {
+			ret = cpc_write(cpu, epp_set_reg, perf_ctrls->energy_perf);
+			if (ret)
+				return ret;
+		}
+
+		pcc_ss_data = pcc_data[pcc_ss_id];
+
+		down_write(&pcc_ss_data->pcc_lock);
+		/* after writing CPC, transfer the ownership of PCC to platform */
+		ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
+		up_write(&pcc_ss_data->pcc_lock);
+	} else {
+		ret = -ENOTSUPP;
+		pr_debug("_CPC in PCC is not supported\n");
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(cppc_set_epp_perf);
+
 /**
  * cppc_set_enable - Set to enable CPPC on the processor by writing the
  * Continuous Performance Control package EnableRegister field.

drivers/cpufreq/Kconfig

@@ -3,7 +3,6 @@ menu "CPU Frequency scaling"
 
 config CPU_FREQ
 	bool "CPU Frequency scaling"
-	select SRCU
 	help
 	  CPU Frequency scaling allows you to change the clock speed of 
 	  CPUs on the fly. This is a nice method to save power, because 
@@ -270,15 +269,6 @@ config LOONGSON2_CPUFREQ
 
 	  Loongson2F and its successors support this feature.
 
-	  If in doubt, say N.
-
-config LOONGSON1_CPUFREQ
-	tristate "Loongson1 CPUFreq Driver"
-	depends on LOONGSON1_LS1B
-	help
-	  This option adds a CPUFreq driver for loongson1 processors which
-	  support software configurable cpu frequency.
-
 	  If in doubt, say N.
 endif
 

drivers/cpufreq/Makefile

@@ -111,7 +111,6 @@ obj-$(CONFIG_POWERNV_CPUFREQ)		+= powernv-cpufreq.o
 obj-$(CONFIG_BMIPS_CPUFREQ)		+= bmips-cpufreq.o
 obj-$(CONFIG_IA64_ACPI_CPUFREQ)		+= ia64-acpi-cpufreq.o
 obj-$(CONFIG_LOONGSON2_CPUFREQ)		+= loongson2_cpufreq.o
-obj-$(CONFIG_LOONGSON1_CPUFREQ)		+= loongson1-cpufreq.o
 obj-$(CONFIG_SH_CPU_FREQ)		+= sh-cpufreq.o
 obj-$(CONFIG_SPARC_US2E_CPUFREQ)	+= sparc-us2e-cpufreq.o
 obj-$(CONFIG_SPARC_US3_CPUFREQ)		+= sparc-us3-cpufreq.o